CIMdata PLM Industry Summary Online Archive

17 August 2012

Product News

New Waveform Roughing Strategy in Alphacam 2012 R2 from Vero

A number of new and improved functions in Alphacam CNC software – including a high-speed machining technique – give manufacturers a competitive edge by allowing them to maximize the potential of their cutting machines.

Alphacam 2012 R2 is the latest release in the CNC software’s ongoing program of development and enhancement. General Manager Nick Spurrett says: “These latest updates ensure Alphacam not only keeps pace with the changing needs of manufacturers throughout the world, but also delivers maximum return on investment.”

The main addition to this latest release is a new Waveform 3D Roughing Strategy, which is a high speed machining technique that maintains a constant tool cutting load by ensuring the tool engagement into the material is consistent.

The tool moves in a smooth path to avoid sharp changes in direction, maintaining its velocity and can dramatically decrease the machining cycle time.

This strategy is superior to the traditional Roughing cycle where machinable geometry features are offset – inward or outward – by a stepover. Traditional tool paths have to run slower feeds and speeds because of the variable width of cut conditions encountered in corners. Tool load spikes as chip thickness increases in areas where the tool finds more material than it did while cutting in a straight line.

Amongst the other new and improved functionality in Alphacam 2012 R2:

  • Automatically optimising a Rough/Finish Toolpath to only remove the area left by a previous sawing operation. “This minimises the cycle time and increases productivity – which manufacturers tell us are vital aspects of their shopfloor processes,” says Nick Spurrett.
  • There are two simulation enhancements: improved support for rapid moves with an all-new Automatic Rapid Manager – rapid positioning moves between 5-axis operations and work plane operations are now automatically created by setting just one “Safe Level” value. And integrating MachineWorks 7.1 provides multi-threading support and significant improvements in speed.
  • One of several upgrades to the Feature Extraction function is the ability to recognise ‘open air’ areas. This is an automatic routine that recognises the areas to be machined by a pocketing type strategy, rather than recognising the areas for profiling.
    • Configurable alignment datum points gives greater control over the automatic positioning and alignment of Solids for machine ready setups.
    • And there is now the ability to run a Geometry Query after extraction to sort specific types of geometry into specific layers, ready for processing with Machining Styles or Autostyles.
  • A new add-in for CAD Extensions provides special functions while importing third-party CAD files – for example, splines can automatically be converted to geometries when importing DXF/DWG files.  

In addition, Alphacam 2012 R2 contains a number of Graphical User Interface enhancements, along with modifications to make the software easier to use.  

Become a member of the CIMdata PLM Community to receive your daily PLM news and much more.

Tell us what you think of the CIMdata Newsletter. Send your feedback.

CIMdata is committed to your privacy. Your personal information will never be sold or shared outside of CIMdata without your express permission.

Subscribe