Delcam has a launched a new website to make it easier for visitors to find details on the company and its CADCAM products and services.  The new www.delcam.com site has been redesigned completely to make navigation between different sections much easier and more intuitive. Delcam already receives over 500,000 visits each month to its websites and expects the new design to attract even more visitors. As well as providing details on the latest news from the company and a list of events where Delcam will participate, the new site offers links to dedicated websites covering each of Delcam’s CADCAM programs; PowerSHAPE for product and tooling design, and reverse engineering; PowerMILL for high-speed and five-axis machining; FeatureCAM for feature-based programming; PartMaker for the programming of turn-mill equipment, bar-fed mills and Swiss-type lathes; and PowerINSPECT, the world’s leading hardware-independent inspection software.  Links are also available to sites describing Delcam’s dedicated software for healthcare, footwear

Agilent Technologies Inc. announced a powerful new version of the Agilent EEsof EDA Advanced Design System software, ADS 2014. Designed to dramatically improve design productivity and efficiency with new technologies and capabilities, ADS 2014 is the software's most significant ADS release to date. ADS 2014 Enhancements ADS is one of the industry's leading electronic design automation software for RF, microwave and signal-integrity applications. ADS 2014 provides users with new technologies, new capabilities and continued enhancements for silicon RFIC, MMIC, RF printed circuit board, and multi-technology RF module design. Features include: Automatic electromagnetic (EM) simulation setup and design partitioning, which automates the removal of SMD and IC active devices, and placement of ports, then reconnection of the design 10X+ faster and 20X+ fewer mouse clicks. Physical layout-versus-schematic (LVS) with device recognition and an innovative module-level LVS that uncovers multi-technology wiring and pin-swap errors. Wireless verification test benches that provide circuit design verification solutions for the newest and

Bosco Sport, Russia’s premier sportswear company and official clothing supplier of the Russian, Spanish, Serbian and Ukrainian Olympic teams, is harnessing the power of Gerber Technology’s YuniquePLM® system to improve visibility and control over its highly diverse product lines. Using YuniquePLM, Bosco Sport accelerated production and delivery of uniforms to hundreds of Olympic athletes and more than 45,000 volunteers. Bosco Sport, a Yunique Solutions’ customer since 2012, is using YuniquePLM version 5.1 to optimize visibility of the product development process, improve product quality and gain a better understanding of financial details. YuniquePLM works seamlessly with the company’s existing Galileo ERP system. It imports product style data and bills of material directly from the ERP system, thereby improving the decision making process, eliminating redundant data entry and accelerating product to market. Original Olympic collections of Bosco Sport are available to the public at Bosco Sport stores in Russia where demand has been extremely

HP announced financial results for its fiscal 2014 first quarter ended Jan. 31, 2014. First quarter GAAP diluted net earnings per share (EPS) was $0.74, up from $0.63 in the prior-year period and above the previously provided outlook of $0.60 to $0.64. First quarter non-GAAP diluted net EPS was $0.90, up from $0.82 in the prior-year period and above the previously provided outlook of $0.82 to $0.86. First quarter non-GAAP net earnings and non-GAAP diluted net EPS exclude after-tax costs of $317 million and $0.16 per diluted share, respectively, related to the amortization of intangible assets, restructuring charges and acquisition-related charges. First quarter net revenue of $28.2 billion was down 1% from the prior-year period and flat on a constant currency basis. The complete news release is available at: http://h30261.www3.hp.com/phoenix.zhtml?c=71087&p=irol-newsArticle&ID=1902009&highlight=

Lantek is in the process of drafting its Strategic Plan for 2013-2015 in consultation with the managers of its international offices following a conference at its Miñano headquarters. At the company’s annual meeting where department heads, technicians, and marketers from around the world gathered to exchange and analyze ideas, the 2013-2015 Strategic Plan’s defining values were agreed to be innovation, teamwork, trust, commitment, passion, and connection to the client. As a leader in the development and marketing of software solutions for the sheet metal industry and the metal structures sector, Lantek aims to strengthen its markets this year with total sales volume growth of 20% for 2014. It plans to achieve this by radically changing its strategies in the comprehensive software solutions division to achieve a growth of 105% while at the same time maintaining the dominant position of its flagship CAD/CAM division, which will continue its sales growth with an expected

EDS Technologies team received the “VAR OF THE YEAR” award at Dassault Systemes Annual sales kick-off meet held on 4thFebruary 2014 in Hyderabad. Additional to this award, following are the other recognitions received by EDS Technologies for its performance in 2013. Social Awards - Life Sciences Industry Award - Industrial Equipment V6 Excellence Award Brand Initiative Award - SIMULIA & 3DVIA DELMIA H2 sales contest winners Sudheer - EDS Technologies Haresh - EDS Technologies Responding to the award S. Senthil, President EDS Technologies Pvt. Ltd. said, “I am delighted to receive this award from Dassault Systemes. It is an acknowledgement of the passion which the entire team at EDS Technologies brings to the table to deliver relevant solutions to the design industry in the country.” Sharing his good wishes with the winners Dr. Chandan Chowdhury, Managing Director-India, Dassault Systemes said, “It is a matter of immense pride for me to acknowledge the contribution which our VARs have made to the Dassault

 PDF Key takeaways: The importance and visibility of Oracle’s Value Chain Summit is clearly increasing, with keynotes from Oracle’s President, Mark Hurd and well-known author and business consultant Geoffrey Moore, among others Oracle announced a new Product Value Chain solution, Oracle Innovation Management solution, designed to fill the gap between product strategy and execution A sizeable number of this year’s presentations clearly illustrated Oracle’s comprehensive end-to-end lifecycle management strategy and associated business platform-enabling capabilities Oracle held their second annual Value Chain Summit February 3-5, in San Jose, California. The event once again attracted a few thousand Oracle customers who were interested in better understanding Oracle’s various supply chain technologies and where they are heading. As with last year’s event, the summit was comprised of a set of keynotes and focused tracks, which included a well-attended track dedicated to Oracle’s Product Value Chain products—Agile PLM and Agile PLM for Process. In total over 650 individuals attended

This free educational webinar, dedicated to exploring the details of PLM implementation, will take place on March 26, 2014 ANN ARBOR, Michigan, 20 February 2014 — CIMdata, Inc., the leading global PLM strategic management consulting and research firm, announces an upcoming free educational webinar, “How to Properly Plan Your PLM Implementation.” Join CIMdata on March 26 at 11:00 a.m. (EDT) to find out how properly implementing your PLM system can have a significant impact on how well PLM will support your business. Based on CIMdata’s 30 years of experience in the PLM industry, our experts have identified the potential pain points associated with PLM implementations: the lack of experience implementing PLM; past PLM implementation failures; and that PLM implementations failed to demonstrate the expected benefit or value. The webinar will be presented by Jim McKinney, CIMdata’s PLM Leadership Practice Manager. “Many people think that once a PLM solution is selected, the hard work is

Optimal Solutions Software announces the release of Sculptor version 3.5. Working closely with their customers to identify features and improvements they have made Sculptor easier to use and more powerful than ever. This release of Sculptor also brings with it dramatically enhanced Mesh Matching functionality with Sculptor+ Match. When used in combination with other modules in the Sculptor family, Sulptor+ Match allows for matching models from various sources such as CAD-CAD, CAD-mesh, mesh-mesh, and mesh-CAD.  An initial model and a target model are used to quickly determine a shape modification required to achieve matching of the initial and target model shapes. This shape modification can then be applied to a 3rd model. Some illustration applications this enables are: matching analysis models for different physics to a deformed or morphed shape (ie CFD to deformed, Hot to cold running shapes) modifying design models to a deformed shape modifying design models to an optimal shape from

Synopsys, Inc. has reported results for its first quarter of fiscal year 2014. For the first quarter of fiscal year 2014, Synopsys reported revenue of $479.0 million, compared to $475.1 million for the first quarter of fiscal 2013, an increase of approximately 1 percent.   "Synopsys began the year with a strong first quarter, featuring continued customer successes and excellent progress preparing for a number of upcoming product announcements," said Aart de Geus, chairman and co-CEO of Synopsys. "While customers are cautious in their spending, technology demands continue unabated, making great EDA and IP solutions essential for their success." GAAP Results On a generally accepted accounting principles (GAAP) basis, net income for the first quarter of fiscal 2014 was$67.7 million, or $0.43 per share, compared to $69.9 million, or $0.45 per share, for the first quarter of fiscal 2013. Non-GAAP Results On a non-GAAP basis, net income for the first quarter of fiscal 2014 was $93.1 million, or $0.59 per share, compared to non-GAAP net income of $103.0 million,