新闻动态

Geometric Ltd. announced its Q4 and annual results for FY 2014-2015 at the board meeting held today. Highlights for financial year ended March 31, 2015 (FY15) The Company’s consolidated revenues rose 0.9% to INR 11,053.01 Mn from INR 10,954.52 Mn last year Dollar revenues stood at USD 180.61 Mn compared to USD 181.39 Mn in previous financial year The Profit after Tax for the year stood at INR 551.63 Mn as against INR 462.43 Mn for FY14 EPS of INR 8.62 for the year as against INR 7.31 in FY14, an 18% YoY Increase Recommended dividend of INR 2.50 on face value of INR 2 per share, by the Board of Directors  Highlights for the quarter ended March 31, 2015 (Q4 FY15) The Company recorded operating revenues of INR 2,679.00 Mn, as against revenues of INR     2,888.89 Mn in the previous quarter, and INR 2,733.62 Mn in the corresponding quarter last year Revenue of Geometric (excluding its joint venture company,

 Cadence Design Systems, Inc. today announced results for the first quarter of fiscal year 2015. Cadence reported first quarter 2015 revenue of $411 million, compared to revenue of $379 million reported for the same period in 2014. On a GAAP basis, Cadence recognized net income of $36 million, or $0.12 per share on a diluted basis, in the first quarter of 2015, compared to net income of $33 million, or $0.11 per share on a diluted basis, for the same period in 2014. Using the non-GAAP measure defined below, net income in the first quarter of 2015 was $72 million, or $0.23 per share on a diluted basis, as compared to net income of $59 million, or $0.20 per share on a diluted basis, for the same period in 2014. “Cadence continued its excellent record of innovation and execution in the first quarter,” said Lip-Bu Tan, president and chief executive officer. “We

CGTech will showcase its expanded range of software applications for the aerospace industry on stand Hall 2B, Stand F172, Booth 2, at the Paris Air Show, Le Bourget, Paris on June 15-19, 2015. CGTech’s VERICUT is widely used in aerospace and defense to improve the efficiency of all types of CNC machine tools. VERICUT is CNC machine simulation, verification, and optimization software that enables users to eliminate the process of manually proving-out NC programs. VERICUT simulates all types of CNC machining, including multi axis milling, drilling and trimming of composite parts, water jet cutting, robotic machining and mill/turn centers. VERICUT runs standalone, but can also be integrated with leading CAM systems used in aerospace including Dassault Systemes CATIA, Siemens PLM NX, Delcam PowerMill, and Open Mind HyperMill. Aerospace applications for CNC machine tool suppliers including DMG MORI, Mazak, Starrag, GROB, CMS, and Hermle will be featured. Throughout the show, CGTech will be demonstrating VERICUT

SimScale today announced the SimScale for Startups Program for startup companies to develop their products better, faster and cheaper. Startup companies now have a way to get started with Computer Aided Engineering (CAE) simulation without making a commitment for thirty to fifty thousand dollars, which usually is cost-prohibitive. The announcement was made as part of a new startup campaign, in which SimScale also launched new online advertising and startup training programs. “The startups that we are working with are creating a wide range of projects, including structural mechanics and thermodynamics designs.” Startup companies will be eligible to receive full access to the SimScale simulation platform, along with one-on-one support for a complimentary startup kickoff project from a SimScale consultant, and ongoing professional support from the SimScale team, all for 170 Euros per month. Additionally, startups will receive SimScale Professional Training to provide startups with hands-on learning to help new users get up

PROSTEP AG of Darmstadt has signed a partnership agreement with the Japanese specialist for CAD-interoperability, ELYSIUM. The target of the partnership is, in addition to geometry, providing the users with the data translation and transfer service OpenDESC.com with the translation of the features and parametric information of their CAD models. Thus, for the first time, it will be possible to process translated data in all current CAD systems and return them to the production system using the same editing possibilities. The offer is destined for companies who, in Joint Ventures or during globally distributed development projects, cooperate with partners using different CAD systems. It is especially beneficial for small suppliers that have to achieve increasing requirements on data quality but are unable to invest in expensive conversion tools. PROSTEP will completely integrate the tools of ELYSIUM in OpenDESC.com to largely automate the translation of features and parametric information and, thus, be

Arena Solutions, today announced a strategic partnership with Q Point Technology to offer Q Point's Green Data Exchange (GDX) to Arena PLM users. GDX is the largest online exchange for compliance data, allowing companies to obtain RoHS, REACH, substance disclosure, and Conflict Minerals information from more than 10,000 suppliers worldwide. "Compliance is a complex challenge that is only becoming more difficult for tech and medical device companies, as national and international governments alike, continue to add more regulations to adhere to," said Steve Chalgren, vice president of product management and strategy for Arena. "We're excited about this partnership with Q Point Technology, which gives our PLM community deep access to their rich compliance analysis solution." Q Point's Green Data Exchange enables customers to: Evaluate the compliance status of a product or sub-assembly to a regulation Know, at-a-glance, if a part is compliant and view all supporting supplier declaration data Communicate with suppliers to request information for

 Arena Solutions, today announced that Q1 2015 broke company records again for total subscriptions, an achievement fueled in part by the largest number of new customer subscriptions in the company's history. New customer subscriptions grew 33% in Q1 2015 over the same period in 2014. Total subscription growth also continues to be strong, increasing at a double digit pace. Nearly one-third of Arena's existing customer base added new products, new seats – or both – during Q1 2015. To accommodate this rapid growth, Arena has increased the size of its sales organization by 85 percent in the past three months. The company also recently moved to new headquarters in Foster City, Calif. "Over the past two years, we've introduced new modules like Demand, Scribe and Quality that have been extremely well received by our customers and, in particular, by the largest enterprise customers," said Craig Livingston, CEO of Arena. "We provide the functionality that global enterprises need in a cloud

Flow International offers FlowXpert 2015, the latest version of its FlowXpert 3D CAD/CAM software featuring faster programming for waterjet applications. The platform expands on the company’s 2D FlowMaster software and includes design functionality powered by SpaceClaim, an integrated 3D modeling tool with flow sequencer. The integrated CAD/CAM capabilities streamlines the pathing process, adding flexibility for users performing waterjet cutting, resulting in faster programming. The company also offers its Mach 3 waterjet system combining motion control, high-pressure components and pump into a single compact machine. To view the original press release, please click here. Search for Flow on CIMdata.com

In an effort to help companies foster innovation and rapidly turn product and service ideas into value, SAP SE today announced the global availability of a new innovation management application. Comprising unique products, services, processes, methodologies and governance, the SAP Innovation Management solution helps companies establish a creative culture that overcomes departmental silos and unleashes the power of innovation. The pace of technological advance is constantly increasing and puts pressure on manufacturers to be more effective in innovation. At the same time, most companies do not fully leverage the innovation potential of their employees and partners, due to a lack of communication and ideas that are still kept in organizational silos. To meet these challenges, SAP Innovation Management powered by SAP HANA was developed to manage ideation with innovative technology. It enables customers to find and link similar ideas and subject matter experts inside and outside the organization leveraging Big Data capabilities. SAP Innovation

Infor, the industry cloud company, today announced general availability of Infor Advanced Scheduling (AS) version 11.This latest release of Infor AS provides a major leap forward in product functionality.  Infor AS version 11 includes key enhancements to help planners collaborate efficiently and evaluate production schedule performance using real time decision support metrics.  The results are easier deployment of schedules and improved collaboration between various teams, ensuring that schedules align with key business objectives. Infor Advanced Scheduling is a constraint-based scheduling solution providing components that are aimed at addressing the unique scheduling challenges for process manufacturers managing variables such as the capacity of tanks, vessels and lines as well as the flow between them. This latest version adds collaborative scheduling, quick search and filter functionality and a user-friendly dashboard for managing schedule performance. Key Enhancements for Infor Advanced Scheduling: Collaborative Scheduling – The collaborative scheduling process allows planners to coordinate with other planners schedule