新闻动态

Altair acquired 100 percent of EM Software & Systems – S.A. (Pty) Ltd and its international distributor offices in the United States, Germany, and China this month. This development adds the FEKO® solver to the HyperWorks® suite and strengthens the Altair simulation offering in the aerospace, automotive, and shipbuilding industries in particular, reflecting the commitment of the company to provide comprehensive, best-of-breed solutions to its customers. In addition, in-house electromagnetic expertise crossing multiple industries will enable the company's consulting arm, Altair ProductDesign, to take on more responsibility in customer engagements where this specialized applied engineering knowledge is required. Typical applications of FEKO include antenna design, antenna placement, electromagnetic compatibility analysis, bioelectromagnetics, radio frequency components, 3-dimensional electromagnetic circuits, design and analysis of radomes, and radar cross-section analysis. Altair HyperWorks contains a number of industry-leading solvers, including OptiStruct®, RADIOSS®, MotionSolve®, and AcuSolve®. The addition of FEKO will help to address coupled electromagnetic-thermal and electromagnetic-mechanical problems,

Enabling better, faster business and product decisions by maximizing connectivity and collaboration across the enterprise through social technologies and socialization of PLM Ann Arbor, Michigan, 24 June 2014—CIMdata, Inc., the leading global Product Lifecycle Management (PLM) strategic management consulting and research firm, announces the expansion of its Collaborative Innovation and Social Product Development consulting practice.  While research will continue in the respective Knowledge Council, this consulting practice will concentrate on the development and adoption of strategies, processes, and technologies to enhance collaboration and connectivity across enterprises as well as their extended enterprise participants thereby allowing for increased use of collective intelligence, thus improving innovation and the return on investment from new product development. As part of this expansion, Peter Bilello, President of CIMdata, announced that Dr. Suna Polat will lead the practice. Dr. Polat’s title will be Director, Collaborative Innovation and Social Product Development Consulting Practice. “We are very pleased that Dr.

 PDF This week GrabCAD invited a group of PLM analysts and media to their first ever media event at their Cambridge, MA offices. GrabCAD claims to be “leading the Open Engineering movement, helping engineers get products to market faster by connecting people, content and technology.” They are best known for their GrabCAD community, where over 1.3 million engineers are actively sharing and collaborating on content from a wide range of authoring tools, primarily mechanical CAD data (currently numbering over 460,000 files). While the benefits of community are well known, some question just how much commerce you can do with public intellectual property. Last November, GrabCAD announced Workbench, a solution focused on small group collaboration, again primarily for mechanical CAD data management. The successful beta test led to general availability in January 2014, and their planned summer release, which was the focus of this week’s event. From their start with CAD data management

The exciting new functionality in Edgecam 2014 R2 begins to show how Edgecam Workflow will be the default method for using Edgecam. Automatic conversion of 2D design data to a 3D model, and other significant enhancements to Edgecam Worfklow, from user interface to improved automatic machining processes, are some of the important aspects in the latest release of Edgecam software enhancing Edgecam Workflow to a new level of capability. Edgecam 2014 R2 has just been launched, and several items of new and enhanced functionality demonstrate why it continues to lead the way in improving productivity and flexibility for manufacturers, increasing their profitability. General Manager Raf Lobato says: “There are a number of exciting new aspects in Edgecam 2014 R2, including 2D to 3D for Part Modeler, the new Edgecam Workflow Solids modeler, comprehenisve machining strategies in Edgecam Workflow, and dynamic co-ordinate system creation. In addition, job reports are now available on portable

ENGINEERING PLM Solutions announces today that RuleDesigner gives the possibility to share images, 3D contents and realistic animations created with Keyshot® in real time, in both PLM and CRM processes. By structuring product information in RuleDesigner PLM collaborative platform, users can exploit the full potential of Keyshot® and, then, share information on the basis of corporate workflows or target users. Indeed, in RuleDesigner each product is represented by an informative dashboard containing data and documents coming from different corporate areas, including Marketing, Sales, CRM, Design, Quality, Projects and Service. The integration of Keyshot® data adds further value, enriching consultation with a high quality visual experience and a high level of interactivity. The Keyshot® community will operate as usual. RuleDesigner will take charge of the work to manage the outputs generated. As a matter of fact, thanks to rule-based configuration processes it is possible to fully automate the processes for delivering and sharing information with

GRAPHISOFT® announced today that ArchiCAD® 18's global rollout process and the introduction of its brand new BIMcloud® Solution has begun.  BIMcloud allows a BIM workflow on any network, hardware or software configuration, connecting teams and projects of any size or setup, 24/7. Shipping started with the International version of both products on June 19, followed by the German version on June 23 and the US and UK/Ireland versions on June 24 – the first four of 27 local versions, according to a busy release schedule, will all reach the market by the end of Q3 2014. For specific shipping dates in the various markets, please contact your local ArchiCAD reseller.  For more information about ArchiCAD 18, please visit www.graphisoft.com/archicad.

Eagle Point Software Corporation, an Autodesk AEC Industry Partner, announced the addition of Bluebeam Revu 12 content to its Pinnacle Series. These resources are the first step in expanding its resources for the AEC industry beyond Autodesk software. Pinnacle Series subscribers who also use Bluebeam Revu 12 can now access: Design Management and Construction Management Workflows 50 How-to Videos Technical Support Live Training "We heard the desire from design and construction professionals throughout the industry to better incorporate Bluebeam into their workflow. With the success of our Autodesk product resources in Pinnacle Series, it was natural for us to provide this learning and productivity content to Bluebeam customers," says Brad Heil, Vice President of Products and Services at Eagle Point.

ASCON Group is pleased to release the brand new Home edition of KOMPAS-3D V15. This parametric software offers all the basic features needed in 2D and 3D design for just 70 Euros (US$95).  The low-cost tool is meant for non-commercial and home use by amateur designers, hobby engineers, and full-time students -- anyone interested in CAD software. About KOMPAS-3D Home At its heart, KOMPAS-3D Home is a flexible 3D modeling system that lets you create 3D models parametrically. Parametric technology has the extraordinary advantage of generating a range of products quickly, all based on a single prototype. A rich collection of functions assist you in producing accurate plans, clear diagrams, documented reports, and even prepare vector-based illustrations output in PDF format. Our integrated drawing editor provides a variety of design disciplines with flexible and automated work procedures. Its intuitive KOMPAS-ABC learning system lets you easily learn CAD through self-study. The learning system is provided

 PDF Key takeaways: Over 3,000 PTC customers and employees convened in Boston at PTC Live Global 2014 on June 16-19. PTC expanded on their Internet of Things and Service Lifecycle Management visions, and premiered Creo 3.0, a major step on their MCAD evolution journey. The acquisition of Atego, a systems engineering tool and services provider, brings leading-edge tools and skills that help PTC offer closed-loop lifecycle management. CIMdata recently attended PTC Live Global 2014 in Boston, MA, USA. PTC Live Global gives PTC customers the opportunity to not only hear and explore PTC’s solution strategies and roadmaps, but also to showcase their own work, network with peers, share ideas, and discuss how they are addressing their challenges. PTC reported that over 3,000 attendees representing approximately 2,000 companies were present at the event. They also stated that over 500 PTC personnel were in attendance. Major themes at PTC Live Global were the Internet of Things (IoT)

ZWSOFT has today released ZWCAD Architecture 2014 SP2, an update to its Top Builder Award winning CAD software featuring many exciting improvements. From more efficient menu organization to improved unit settings, the update also includes many other bug fixes. Unit Settings With the ZWCAD Architecture 2014 SP2 update, users can now choose which unit they would like their drawings to be based upon. Whereas previously users were only able to annotate their entities in millimeters, they can now choose between meters, centimeters, inches and feet. This allows users to personalize designs even further to their own needs, whatever units of measurement they prefer, removing the need to convert measurements manually. Simplified Menu Layout Since efficiency and simplicity is a vital factor in speeding up the design process, the new screen menus in ZWCAD Architecture 2014 SP2 have been specifically designed to improve speed of selection, while promoting the most used functions and reducing the number of clicks