新闻动态

Tri-D Technologies announced the introduction of the ExactFlat Online plugin for Autodesk Fusion 360.  ExactFlat Online is a 3D to 2D flattening solution running entirely in the Cloud.  The new Plugin allows users of Fusion 360 to publish and upload surface models directly to the ExactFlat SaaS engine for flattening.  Once flattened the pattern pieces can be downloaded into Fusion 360 or AutoCAD for finishing steps such as adding seams and notches or for creating assembly drawings and cut files. "We've been evaluating Fusion 360 because of the functionality and the fact that it runs on the Cloud."  Said Aram Goganian, President of Predator Cycling.  "Automated flattening is incredibly important to us as well and once we found out that there was a Cloud-based ExactFlat Plugin the decision to use Fusion 360 was a no-brainer." ExactFlat automation software promises to dramatically reduce the time associated with flattening, pattern making, and cutting tasks.  Fully

Cadence Design Systems has unveiled the Allegro 16.6 portfolio, which features several new products and technologies. Included in this release is the new Allegro PCB Designer Manufacturing Option, which can shorten the time to create manufacturing documentation by up to 60 percent, and several key technology updates catered to increase efficiency, control and productivity for designers, while streamlining handoff to manufacturing. Driven by increasing demands to provide a more predictable and shorter design cycle, the Allegro 16.6 portfolio includes more capabilities that accelerate routing and tuning for high-speed interfaces such as DDR3 and DDR4. The Allegro 16.6 portfolio includes new products to help PCB designers achieve maximum efficiency and productivity, while keeping cost of ownership low. The new products include : 1 – Allegro PCB Designer Manufacturing Option, a comprehensive, powerful, easy-to-use toolset that makes it efficient and cost effective for PCB designers to streamline the development of a release-to-manufacturing package for

Synopsys, Inc. today reported results for its second quarter of fiscal year 2015. For the second quarter of fiscal year 2015, Synopsys reported revenue of $557.2 million, compared to $517.7 million for the second quarter of fiscal 2014, an increase of approximately 7.6 percent.   "Our fiscal second quarter results were very strong, and solidify our outlook for the full year," said Aart de Geus, chairman and co-CEO of Synopsys. "We see clear momentum with our new implementation and verification products in the early stages of a multi-year customer upgrade cycle. Our entry into the software quality and security space has opened up an opportunity to drive incremental growth in both familiar and new market segments and build on Synopsys' strengths." GAAP Results On a generally accepted accounting principles (GAAP) basis, net income for the second quarter of fiscal 2015 was $55.6 million, or$0.35 per share, compared to $63.3 million, or $0.40 per share, for the second quarter of fiscal 2014. Non-GAAP Results On a

ZWCADUSA, the authorized reseller of the ZWCAD product line in North American, today reported on the ZWSoft 2015 Global Partner Conference (GPC) held recently in Guangzhou, China. Over 200 attendees from over 30 countries joined the four-day event for ZWSoft reseller and development partners. In introducing this year's theme of “To Be Different", CEO Truman Du spoke to the company's current and future distinctions in innovations, performance, and affordability. ZWSoft shared recent achievements in its business and product development, collected feedback for its product roadmap, and discussed sales strategies and customer successes with partners. Additional GPC highlights included: The line-up of ZWSoft speakers included Mr. Du, with over 20 years of experience in the CAD industry; Owen Zi, GM of ZW3D; Kingdom Lin, GM of ZWCAD Overseas; Joh Li, CTO of ZW3D; Felix Gao, Director of ZW3D overseas; and Daniel Huang, ZWCAD Product Manager. Product talks covered updates and plans for the ZWCAD, ZW3D,

13th May 2015 saw the latest session of the GRAITEC BIM European Tour 2015, held at the Sound Garden Conference Center, with over 100 attendees from across the construction industry. This full day event was attended by representatives from construction giants who are heavily influential in the Polish and Global markets; Skanska SA, STRABAG, Hochtief Poland SA, BUDIMEX, ARUP, Energoprojekt-Warszawa SA, Epstein, MCKB and UNIBEP. This leg of the BIM tour was also attended by significant delegates from the Ministry of Economy and other non-governmental organizations, with the seminar fully supported by the Polish Association of Construction Employers and attracting media sponsorship from Builder magazine. The GRAITEC European BIM Tour kicked-off in the UK in April and has already visited Germany and Poland with France, Czech Republic, Slovakia, Italy and Romania still to follow visiting eighteen major cities in eight countries over a four month period. Covering industry proven ‘best BIM practices’ whilst

Dassault Systèmes today announced during its SIMULIA Community Conference that the first heart model from its “Living Heart Project” will be commercially available on May 29, 2015. Powered by Dassault Systèmes’ 3DEXPERIENCE platform’s realistic simulation applications, the commercial, high-fidelity scientifically validated 3D simulator of a four-chamber human heart is the first product of its kind. With this model, device manufacturers, researchers, and medical professionals will be able to perform virtual tests and visualize the heart’s response in ways that are not possible with traditional physical testing. The “Living Heart” model as delivered represents a baseline healthy heart, which can be used to study congenital defects or heart disease by modifying the shape and tissue properties in an easy-to-use software editor. In addition, medical devices can be inserted into the simulator to study their influence on cardiac function, validate their efficacy, and predict reliability under a range of operating conditions. For example,

Third Wave Systems announced today it will integrate its Production Module technology with Siemens’ NX™ software to help optimize machining processes. This means that Third Wave Systems can now offer its current and future customers, an interface to the same technology that companies around the world depend on every day, to enhance product development decision making and produce better products. Production Module is process-optimization technology that empowers users to better understand machining processes, make informed decisions about tooling and toolpath strategies and identify potential areas for improvement. The NC program optimization software integrates physics-based material models, CAD/CAM inputs, tooling and workpiece geometries and machine dynamics to create processes that machine dramatically faster while improving tool life and part quality. NX, developed by Siemens’ product lifecycle management (PLM) software business, is an integrated 3D computer-aided design, manufacturing and engineering analysis (CAD/CAM/CAE) solution. “Our customers want technology that has an open data model that

SAP SE announced the launch of the SAP HANA Cloud Platform for the Internet of Things (IoT), expanding its comprehensive portfolio of IoT solutions to help customers connect the core of their business to the edge of the network, gain operational efficiencies and drive the creation of new revenue models, products and services. SAP continues to broaden its reach by collaborating with Siemens and Intel to make it easier for customers to adopt and manage IoT solutions. These collaborations add to a strong partner ecosystem SAP has developed including recent announcements with Jasper, Accenture and T-Systems. Additionally, customers including Tennant are gaining real business value from leveraging SAP HANA to successfully implement IoT. These announcements were made at SAPPHIRE NOW, held May 5-7 in Orlando, Florida. “SAP is helping customers reimagine their business with the most comprehensive portfolio of Internet of Things solutions from core business operations to the edge of the

Kubotek USA has officially released the newest version of KeyCreator 2015. KeyCreator Direct CAD, arguably the fastest CAD modeling solution currently available, adds several new features and functions for even more dynamic modeling and editing. The release also includes many customer-driven enhancements for a better user experience. In addition, the speedy design-to-manufacture prowess and legendary CAD data reuse KeyCreator Direct CAD is known for is further enhanced by new design import options for 2D file types. The latest release of KeyCreator 2015 provides an optional 2D/Drawing Translator package for the import and editing of native CAD drawing file formats. Many companies exchange 2D/Drawing information throughout the supply chain and must convert their native CAD drawing files into other usable 2D/Drawing file extensions for manufacturing purposes. KeyCreator, however, will quickly accept native 2D/Drawing files, and if needed, allow users to make any necessary modifications before completing their manufacturing tasks. Reading and editing

Dassault Systèmes and CST - Computer Simulation Technology AG, developer of the technology-leading CST STUDIO SUITE®, today jointly announced a partnership to integrate 3D electromagnetic simulation technology from CST into Dassault Systèmes’ 3DEXPERIENCE platform. High-tech, transportation & mobility, aerospace & defense, industrial equipment and other industries will soon have access to a best-in-class multi-physics simulation solution for the creation and design of smart objects. The Internet of Things market is expected to reach 26 billion units by 2020 as devices, cars and buildings are developed beyond form and function to digitally interact with the physical world. However, this connectivity can lead to electromagnetic interference between devices or other unintended consequences that degrade product performance, reliability and safety. The combination of Dassault Systèmes’ 3DEXPERIENCE platform with CST STUDIO SUITE technology will enable customers to create and analyze electromagnetic behavioral models that simulate device function in a wide range of frequencies. This capability enhances the