新闻动态

It is the fourth year of the forum in China that Eworks has collaborated with CIMdata. The China Forum is the fourth station of the program, which goes from the end of March to April in Ann Arbor, Amsterdam, Pune, Beijing, and Tokyo. As the main speakers of the forum, Mr. Peter Bilello, CIMdata President and Mr. Stan Przybylinski, CIMdata Director of Research introduced the global PLM market development and trends. Dr. Pei Huang, e-works CEO hosted the forum and did all the translation. In the session of The State of PLM—Today’s Market and Leading Trends, according to Mr. Peter Bilello, the global PLM market in 2014 has a 6.8% growth to $37.2 billion with a solid growth surpassed CIMdata's forecast. Among all the segments, simulation and analysis has a strong growth at 8.9%. PLM's next evolutionary step would be that companies need to innovate across the full spectrum of their operations

 Bentley Systems, Incorporated today announced its call for submissions to the 2015 Be InspiredAwards program. The deadline for entries is May 31, 2015. The awards, which are selected by independent juries of industry experts, recognize the extraordinary and innovative work of organizations that help sustain the world’s infrastructure by designing, engineering, constructing, delivering, and/or operating roads, buildings, plants, utility networks, and more. Winning projects showcase “BIM advancements” through depth of information modeling, for better asset performance, and/or breadth of information mobility, for better project performance. The 18 Be Inspired Awards categories in this comprehensive, global program cover every aspect of the built environment. All Bentley users are invited to enter their projects in the Be Inspired Awards program, no matter what phase the project is in – preconstruction/conceptual, design, construction, or built. The three finalists chosen for each Be InspiredAwards category will win a trip to London to attend, as a guest of Bentley Systems,The Year in Infrastructure 2015 Conference, being held

Arena Solutions today announced a strategic partnership with Q Point Technology to offer Q Point's Green Data Exchange (GDX) to Arena PLM users. GDX is the largest online exchange for compliance data, allowing companies to obtain RoHS, REACH, substance disclosure, and Conflict Minerals information from more than 10,000 suppliers worldwide. "Compliance is a complex challenge that is only becoming more difficult for tech and medical device companies, as national and international governments alike, continue to add more regulations to adhere to," said Steve Chalgren, vice president of product management and strategy for Arena. "We're excited about this partnership with Q Point Technology, which gives our PLM community deep access to their rich compliance analysis solution." Q Point's Green Data Exchange enables customers to: Evaluate the compliance status of a product or sub-assembly to a regulation Know, at-a-glance, if a part is compliant and view all supporting supplier declaration data Communicate with suppliers to request information for

Dassault Systèmes  today announced its acquisition of Modelon GmbH, expert in “ready-to-experience” content for systems modeling and simulation which are strategic to transform the transportation and mobility industry. With this transaction, Dassault Systèmes reinforces its portfolio of industry-leading content, applications and services used in today’s age of experience. In the context of the Internet of Things, smart, connected objects such as autonomous driving systems are increasingly showing their potential to profoundly change consumer lifestyles, yet their highly intricate and interconnected systems must seamlessly work together to do so. Electronics are expected to comprise 50 percent of vehicle development costs by 2030 and the number of electric vehicles worldwide is predicted to reach 12 million by 2021. Model-based systems engineering is an important facet of defining, imagining and shaping virtual products and user experiences that flawlessly mimic future ones in the real world. Modelon GmbH’s proprietary, multi-physics modular and reusable content—based on the Modelica open standard

Workshop will take place in Santa Clara, California on June 17. ANN ARBOR, Michigan, 23 April 2015—CIMdata, Inc., the leading global PLM strategic management consulting and research firm announces that CIMdata’s Systems Engineering Knowledge Council will present a workshop on the topic of “Systems Engineering Supporting High-Tech Product Development.” The workshop will take place in Santa Clara, California the day after CIMdata’s PLM Road Map for the High Tech Electronics Community. The workshop, now in its third year, will be facilitated by CIMdata’s practice manager for Systems Engineering, John MacKrell and will focus on the critical area of a systems-approach to product development. The emphasis will be on how systems engineering impacts high-tech companies and products. The workshop will explore the effective use of systems level requirements and work processes to drive all phases of the product development process from concept to retirement. Systems engineering (SE) and Model-Based Systems Engineering (MBSE) are very

Cadence Design Systems, Inc. today announced five new OrCAD® products and three key feature updates as it celebrates 30 years of continued OrCAD design and innovation. The expanded OrCAD portfolio enables greater product creation efficiency by delivering additional high-speed design capabilities that address productivity and time-to-market challenges.  The new products and key features focus on increasing designers’ productivity by reducing design cycle time and facilitating more advance designs via additional high-speed capabilities. New Products OrCAD Component Information Portal provides users with CIS database management capabilities and integrated access to parametric component data through an interactive, web interface directly within the OrCAD Capture CIS product OrCAD DFM Checker provides a comprehensive set of manufacturing/fabrication-centric checks for OrCAD PCB Editor. The OrCAD DFM fabrication checks can be run at any time during PCB place and route to help ensure that no fabrication-related issues are present, helping designers avoid fabrication-related delays, additional costs and re-work. OrCAD Panel Editor

MathWorks today announced that Polytechnic University of Madrid is now providing MATLAB and Simulink to students and faculty across its campus. As a result, the school community has access to the tools on university-managed and student-owned computers for research and classes. Greater access by students and professors to MATLAB and Simulink – as well as 50 additional products from MathWorks – is expected to further advance the University’s engineering program, and ultimately, help prepare students for employment after graduation. The choice of MATLAB and Simulink for technical computing and Model-Based Design further demonstrates the commitment of the Polytechnic University of Madrid to preparing students for the professional world, allowing them to gain practical experience with the tools that are used as a worldwide standard. Now, students and faculty have access to products for applications in data analysis, signal and image processing, communication, control systems, physical modeling, code generation as well as verification and validation. Tools will be accessible through

SAP SE  today announced its financial results for the first quarter ending March 31, 2015. BUSINESS HIGHLIGHTS IN THE FIRST QUARTER 2015 SAP again delivered exceptionally strong growth in the cloud. First quarter non-IFRS cloud subscriptions and support revenue grew 131% year-over-year (95% at constant currencies).[1] New cloud bookings, the key measure for SAP’s sales success in the cloud, increased 121% in the first quarter to €120 million. The Company had a very strong cloud and software revenue performance with 24% growth in non-IFRS cloud and software revenue (12% at constant currencies) to €3.66 billion. Non-IFRS operating profit increased 15% (decrease of 2% at constant currencies) to €1.06 billion. “We are pleased to report triple-digit growth in both cloud and our business network segment which started on a high note,” said Bill McDermott, CEO of SAP. “SAP S/4HANA saw robust early traction and is catalyzing momentum across SAP. We are a strong growth company with every

Atos today announces its first quarter 2015 revenue. In the first quarter, revenue was € 2,427 million, up +17.6% year-on-year and up +0.2% at constant scope and exchange rates. Order entry was€ 2,198 million, up +31.5% year-on-year, representing a book to bill ratio at 91%. Full backlog was € 16.6 billion, representing 1.7 years of revenue. Full qualified pipeline totaled at € 5.6 billion, representing 6.7 months of revenue. Thierry Breton, Chairman and CEO of Atos, said: “Since the beginning of the year we have seen the outcomes we expected from the strategic moves in 2014 start to materialize. The new sales organization and the focused investments we made in digital solutions are progressively translating into sales and pipeline increase. Indeed, revenue in Cloud, Big Data, and Cyber-security represented 10% of the total revenue in Q1 with a double digit growth rate. During the first quarter of 2015, the Group signed several significant deals with some of its largest customers, becoming the partner of their digital transformation. In a

SoftInWay Inc. announces its plans to host an evening networking event for the ASME Turbo Expo 2015 in Montréal, Canada. This is the next SoftInWay event organized through the company’s Zurich AfterWork networking organization which hosts international gatherings for professionals involved in the Energy, Technology, Startup, and Finance Industries. Zurich AfterWork originated in Switzerland as a means for professionals to meet and network in a casual and enjoyable setting. Since its conception, Zurich AfterWork has expanded its reach from the Zurich area, holding events in London, Vienna, and Munich. This will be the first Zurich AfterWork in North America. “We hope that bringing Zurich AfterWork to Canada will benefit a new piece of the industry population that was unable to attend our European events,” said ZAW creator, Valentine Moroz. The ASME Turbo Expo is bringing together thousands of turbomachinery and energy professionals, all looking to expand their industry knowledge and professional connections.