新闻动态

Altium Limited has announced the latest update to its signature PCB design software, Altium Designer 14.3. Responding to user community feedback, Altium has updated the software to provide improved support and new features that facilitate design reuse and more efficient electronics design. This update – which is available to all subscription users – will bring Altium users improved Component Variant Support, which will give them the ability to design the schematic and PCB for drop-in replacement and alternative parts. This provides sizeable productivity gains for product variants, while also making it easy to source and manage multiple alternative parts from the supply chain. “We are committed to deeply engaging with our user community and responding to their needs to continually improve our software,” said Altium Limited CEO, Aram Mirkazemi. “Since the initial release of Altium Designer 14, we have released two additional updates that have incorporated the features and improvements that our

Aras® today announced that Roki Co., Ltd., a manufacturer of automotive filtration equipment and environment-friendly products that improve fuel consumption and reduce gas emissions, has selected Aras Innovator® suite for enterprise PLM to optimize 3D design management. The initial implementation of Aras Innovator will provide E-BOM management, including product configuration management, design change management and CAD integration. Together, this will facilitate Roki’s strategy to provide 3D design and real-time collaboration with clients worldwide. Roki is a worldwide leader in automotive filtration equipment, air and water purification systems, fuel cell systems and cogeneration filter systems. Roki’s PLM strategy with Aras will provide the foundation for achieving a 24-hour development cycle that eliminates lag between Roki’s multiple foreign R&D centers. For more information please visit http://www.roki-jp.com “We are very pleased that Roki has selected Aras for enterprise-wide PLM,” said Peter Schroer, President of Aras. “Roki has historically developed innovative and high-quality products that keep

MSC Software Corporation today announced that CEVT (China Euro Vehicle Technology AB) based in Gothenburg, Sweden, has used MSC Nastran advanced nonlinear to design and analyze the vehicle architecture of C-segment cars for Volvo Cars and Geely Auto. CEVT is focused on developing new modular architectures and key components for Volvo Cars and Geely Auto in the C-segment (small family car segment). The integrated set of engineering simulation solutions from MSC Software and MSC Nastran help CEVT with the advanced linear and nonlinear analysis required in the architecture development program. “The single model approach helps us save time and ensure our high quality standards. We are able to use the same data for NVH, Durability and Nonlinear Analysis,” says Anders Werner, Module Team Director CAE. A vehicle architecture is the integration of a set of common components, defined functional and performance limits, a set of common interfaces, a range of dimensional flexibility, as well as a common manufacturing system.

Autodesk, Inc. today announced that it will broadcast its annual meeting of stockholders live via its website on Tuesday, June 10th at 2:30 p.m. Pacific Time. The live webcast will be available through Autodesk's Investor Relations website at www.autodesk.com/investors. Please go to the website at least 15 minutes early to register, download and install any necessary software. For more information, please call Autodesk Investor Relations at 415-507-6705.

OPEN MIND Technologies AG is presenting at the amerimold from June 11-12, 2014. OPEN MIND will introduce the CAM solution hyperMILL® Version 2014.1 at Stand 522 in the Suburban Collection Showplace in Novi MI. OPEN MIND will use the opportunity to address tool and mould manufacturers in the U.S.A at the American offshoot of the successful EuroMold. The continuous implementation of new technologies, optimizations of existing strategies and extensions, such as the use of new tools, characterize every hyperMILL® release. New in Version 2014.1: Improvements for reamers, barrel cutters in different designs and lens cutters. Measuring probe support has also been added. The quality assurance processes can be accelerated with the associated cycle 3D point measure. Colleagues experience at the machine OPEN MIND provides the machine operator a visualisation solution with the new hyperMILL® ShopViewer. The ShopViewer allows the machine operator to check and simulate manufacturing processes directly via the monitor. The display,

Rand Worldwide announced that its IMAGINiT Technologies division will have a significant presence at several high profile industry conferences. Through lecture style sessions, IMAGINiT experts will explore some of the most significant topics impacting the design engineering industry including enhancing collaboration, effectively using point clouds, and maximizing the benefits of existing design software. Sessions will be led by IMAGINiT professionals with deep industry knowledge as well as software expertise, ensuring an understanding of both the technology and business implications. “IMAGINiT’s team of experts draw from industry experience and deep hands-on implementation knowledge to provide tailored advice, insight and training,” says Scott Hale, vice president of services for IMAGINiT Technologies. ”Design engineering projects are becoming more complex on every level and our unique vantage point in helping solve our client’s most complex design engineering challenges, gives us the experience to define best practices that we are proud to share with audiences looking to optimize and

iBASEt’s Conrad Leiva, Vice President of Product Marketing and Alliances, will give a presentation at PTC Live Global on “The 3D Model-Based Enterprise Value Chain - Integrating Manufacturing, Suppliers and Aftermarket Services” on Tuesday, June 17 at 4:45 p.m. at the Boston Convention and Exhibition Center, room 105. Today’s marketplace demands faster new product introduction, better orchestration of the supply chain and higher quality standards. To achieve all these goals in industries with highly complex products it is necessary to have tight integration and streamline the change management processes across the extended value chain for the entire product lifecycle. These change management processes include managing the transitions from engineering BOMs to manufacturing BOMs to process plans to work in process, managing product characteristics tied to inspection plans, and managing product configurations for upgrades and modifications performed during MRO. Processes discussed include engineering change management, engineering change requests, engineering disposition for non-conformances and

Altair announced its 2014 Global Altair Technology Conference (ATC) and ATCx Series today. ATC events will continue to cover a wide array of topics, industries, and computer-aided engineering domain areas, and last for two to three days. The new ATCx designation has been created for smaller, focused one-day events that offer more depth in a specific topic and/or industry. ATCx topics to be explored include aerospace, multiphysics, lightweighting, energy, automotive, marine, heavy industry/machinery, shipbuilding, marine/offshore, and defense. In addition, several locations will also offer concurrent student seminars, bringing together academic researchers and industry practitioners to share best practices and lessons learned. Flagship ATC events will be held June 24-26 in Germany, July 10-11 in China, and July 17-18 in Japan. Presenters from leading companies will showcase their experiences and successes leveraging Altair tools for design and product development. The latest trends, developments, and applications in the field of simulation-driven design and optimization

MathWorks has announced that Italy's Politecnico di Milano has signed an agreement that provides all of its faculty and students with MATLAB, Simulink, and 48 additional MathWorks products. Politecnico di Milano joins more than 400 schools worldwide already using the MathWorks university-wide license. Politecnico di Milano is Italy's top university, according to the QS World University Rankings 2012-2013. QS also ranks the school as one of the top 50 universities in the world for computer science and information systems. Politecnico di Milano's adoption of MATLAB and Simulink for technical computing and Model-Based Design further demonstrates its commitment to prepare students for their professional careers by giving them hands-on experience with the tools that are widely used by industries across the globe. Politecnico di Milano's MATLAB and Simulink license includes analysis, design, modeling, simulation, code generation, and testing products for engineering and science schools, plus computational finance for business and economic schools. Politecnico di Milano is deploying

GRAITEC has acquired (through its UK Subsidiary Adris Ltd.) MicroCAD, a well-established Autodesk CAD Solutions provider. Adris Ltd, already a highly respected Autodesk Platinum reseller in the UK supplying design software and services continues to grow its UK base, and through this acquisition aims to perpetuate growth by providing sales, support & consulting services across the whole of the UK via five strategic locations ideally placed to offer the best possible service to its customers nationwide. MicroCAD Ltd is a full service provider for Autodesk products for the Architectural, Construction Engineering and Mechanical industry markets. With nearly 30 years’ experience, MicroCAD has the in depth knowledge to develop tailored solutions and then supply, install, support and provide training and consultancy services to help its customers achieve maximum results. As a growing company MicroCAD is already an Autodesk Gold reseller and from this acquisition all of MicroCAD’s customers will benefit from coming under the Adris