CIMdata 博客

Innovyze announced the worldwide release of the V4.5 Generation of IWLive, a major new version of its real-time water network modeling solution featuring significant new and extended capabilities driven by input from Innovyze customers. The new release reinforces Innovyze’s commitment to offering proven, best-of-class solutions to address the business drivers for smart water grids of today and tomorrow. A complete real-time network hydraulic and water quality modeling, monitoring, forecasting and SCADA integration software, IWLive equips water utility operators with tools that are both predictive and reactive. It continuously assesses system performance and alerts operators to problems that may arise in the coming minutes, hours, or days, allowing them to quickly determine their severity and the time of onset and develop reliable response strategies to minimize downstream effects.  Designed for use in the water distribution control room, IWLive gives operators unprecedented decision making ability in developing real-time response strategies. They can run accurate hydraulic simulations that factor in

eQuorum Corporation announces significant new features in Version 8.7 of its ImageSite® Document Management solution, including industry first file earmarking functionality.  This is the first time the document management industry has integrated covert file tracking in a document management solution.  Scott Brandt, eQuorum’s CEO, stated “this is really exciting because today’s document management systems leave companies hanging once files are downloaded by their users.  Now IT and Legal departments have the added assurance that if files are compromised they will know about it.” ImageSite’s Earmarking module can track files outside the corporate network and using alert parameters can notify corporate administrators when files are compromised either by being opened outside allowable IP ranges, opened an unacceptable number of times, or printed or saved in a given time frame.  Administrators are also given information to decide whether or not to lock down the file.  Currently, all Word and Excel documents are included, as well

Tata Consultancy Services (TCS), reported its consolidated financial results according to IFRS US dollars for the quarter ended December 31, 2013. Revenues at $3.44 billion; up 17% Y-o-Y International revenues grow 3.8% in dollar terms sequentially Hiring Target for FY14 increased further to 55,000 from 50,000 Net Income at $ 858 million up 31.7% Y-o-Y Financial Highlights for Quarter Ended December 31, 2013 Operating Profit at $1,023 million up 27.3 % Y-o-Y Business Highlights for Quarter Ended December 31, 2013 Gross employee addition: 14,663 Total headcount: 290,713 Utilization: 84.3% (excluding trainees) & 77.5% (including trainees) Number of $50m+ clients increases by 2; Number of $20m+ clients increases by 4 To view an unabridged version of this press release, visit: http://www.tcs.com/news_events/press_releases/Pages/TCS-Financial-Results-Q3-FY-2014.aspx

Ideate, Inc. announced that Ideate has been awarded Platinum Partner status by its strategic partner, Bluebeam Software. Meredith Jung, Channel Sales Specialist at Bluebeam Software, presented a plaque in acknowledgment of the award to Ideate President Bob Palioca at the Ideate-hosted joint Customer Appreciation Luncheon and Holiday Party held at the Autodesk Gallery, One Market Street, San Francisco, California on December 10, 2013.  Tim Teigen, AEC Sales, Ideate Inc. says about Bluebeam, “At Ideate, we are always looking to partner with technology firms whose solutions expand yet simplify the workflow of our customers. With Bluebeam, we’ve found a product that is powerful way beyond its price point and gives our clients tools that legitimately and easily promote collaboration and coordination on any size project.”  “We are delighted to receive this acknowledgment from our valued partner Bluebeam,” says Bob Palioca. “Our partnered relationship has streamlined customer access to Ideate software solutions, training and consulting services

Altair today announced that it has appointed a new management team in Europe. Effective January 1st, 2014, Dr. Detlef Schneider has been appointed senior vice president EMEA (Europe, Middle East and Africa). Dr. Pietro Cervellera has assumed responsibility for all of Altair’s operations in Germany, Austria, Switzerland, and Eastern Europe.  Both positions have been filled with very experienced, long-time Altair employees. Dr. Schneider, who received his engineering diploma and PhD from the University of Karlsruhe, Germany, began working for Altair in 1997. Since then he has filled several positions at Altair in Germany and abroad, among them managing director of Altair Germany and senior vice president solver products through December 2013. In his most recent role he was responsible for the development of all of Altair’s solver products, including MotionSolve®, AcuSolve®, RADIOSS®, and OptiStruct®. “I am looking forward to my new responsibilities for our operations in EMEA. In my new position I will

Mentor Graphics Corporation today announced the availability of the latest release of its Mentor Embedded Automotive Technology Platform (ATP) for Linux-based in-vehicle infotainment (IVI) system development. Automotive Tier One suppliers can speed the development of rich and responsive user interfaces or HMIs, similar to those seen in consumer electronics devices, with the new graphics development and optimization functionality added to this GENIVI 5.0 compliant release. In addition, by combining ATP with the recently announced Mentor® Embedded Hypervisor automotive OEMs can integrate greater functionality, such as device connectivity, on emerging infotainment hardware system-on-chip (SoC) architectures while maintaining secure separation for critical functionality. “Our experience working with Tier One suppliers drove us to simplify profiling of Linux-based IVI systems and the identification of bottlenecks by developing instrumentation in the kernel and graphics layers.” The latest ATP release is a fully instrumented platform enabling the use of the award-winning Mentor Embedded Sourcery™ Analyzer to profile the entire embedded IVI system,

C3D Labs (ASCON Group) is pleased to announce that GeoS Center has licensed its C3D Solver geometric constraint manager, which is part of the C3D geometric modeling kernel. GeoS Center is a well-known Russian developer of geometry software and integrated solutions for design automation. “We have worked with ASCON for many years, as our partnership began in 1990 and continues successfully to this day,” said Sergei Labutin, Director of GeoS Center. “I am confident that the C3D Solver solution will be of great interest to our customers, as it will provide them with added benefits in their design work. The geometric solver is adds to our K3-Furniture software suite’s list of competitive advantages.” “Over the past year, we have spent considerable effort on developing the 3D geometric solver further,” said Alexander Maximenko, С3D Solver development manager. “In particular, we added the ability to define mates for any set of three-dimensional geometric objects.

Dassault Systèmes will host a webcast and a conference call on Thursday, February 6, 2014, to discuss its operating performance for the fourth quarter and full year 2013 ended December 31, 2013. The management of Dassault Systèmes will host the webcast at 9:30 AM London Time - 10:30 AM Paris Time and will then also host the conference call at 9:00 AM New York Time - 2:00 PM London Time - 3:00 PM Paris Time. Both the webcast and the conference call will be available via the Internet by accessing Dassault Systèmes’ website athttp://www.3ds.com/investors/. Follow the directions on the main page to link to the audio. Please go to the website at least fifteen minutes prior to the webcast or conference call to register, to download and install any necessary software. The webcast and conference call will be archived for 30 days.

Four Vero Software brands will be showcasing their most recent features and updates at the Southern Manufacturing Exhibition, being held at FIVE, in Farnborough, in the UK, on February 12th and 13th. Alphacam, Edgecam and Radan are on stand U106, while Javelin is on stand G97. Alphacam: Stand U106 Visitors to the stand will see a host of Alphacam 2014 R1 enhancements, including those to solid tools, multi-processing and CAD to CAM. Cutting tools can now be defined from solids which are displayed during solid simulation. The lathe module now supports multiple turrets, including revolver and platen type configurations. This gives the added benefit of enhanced graphical simulation; and improved collision detection within lathe, which is especially useful when using multiple turrets. For multi-processing, Alphacam can still be operated at the same time that multi-core hardware technology is being utilised to generate complex toolpaths. This eliminates the need for the user to wait for

Today ConnectPress announced a new home page design for its MCAD, AEC and PLM communities. Utilizing HTML5, the completely redesigned page brings cleaner presentation to news, features, tips and tricks and advertising.  The last home page redesign was over five years ago. “I’m especially excited about the convenient access to industry content subsets,” says Rita Stange, Managing Editor. “The editorial team works hard to bring members important updates in areas like Aerospace, Sustainable Design and Consumer Products. On our old page, you could turn on these ‘community views’ but they were somewhat buried in the navigation. Now each topic set has multiple recent article headlines as well as navigation points.” The new interface highlights video content as well as more traditional material and takes advantage of  more ‘real estate’ on larger monitors.