CIMdata 博客

Dassault Systèmes today announced that it has partnered with the National Institute for Aviation Research (NIAR) to open an innovation center at Wichita State University (WSU) to advance the use of new technologies such as additive manufacturing that will shape the future of the aviation industry.  The 3DEXPERIENCE Center will be part of WSU’s Innovation Campus. Wichita, Kansas is considered to be the epicenter of aerospace education; WSU ranks first in the United States in industry expenditures on aerospace research and development, according to the National Science Foundation. The 3DEXPERIENCE Center will focus on enabling advanced product development and manufacturing, next generation manufacturing materials and technologies using Dassault Systèmes’ 3DEXPERIENCE platform and brand applications, including: • Development of new engineered materials with BIOVIA applications (for example, Materials Studio),  • Simulation and optimization of materials, additive manufacturing processes and systems, • Multi-Robotics Advanced Manufacturing (MRAM), with DELMIA multi-scale manufacturing, and • Certification of the end-to-end process, integrating various levels of complexity and

CIMdata, Inc., the leading global PLM strategic management consulting and research firm and Longview Advisors, Inc., organizer of 3D CIC announce the presentation topics for PLM Road Map for the Aerospace & Defense Industry featuring 3D CIC, to be held October 28-29 at The Westfields Marriott – Washington, Dulles. PLM Road Map 2015 for the Aerospace & Defense (A&D) Industry featuring 3D CIC is the must-attend event for A&D industry executives and PLM practitioners globally—providing independent education and a collaborative networking environment where ideas, trends, experiences, and relationships critical to the A&D industry germinate and take root. Day one of the event will be facilitated by CIMdata, producer of PLM Road Map and will focus on 3D Model-Based Design (MBD) for Product Definition, with emphasis on the following areas: advanced features, data retention, and compliance. Presentations will be made on the following topics: How digital aircraft type certification can be achieved and become a standard industry

Unique, two-day event takes place on October 28-29 in the Washington D.C. area. Ann Arbor, Michigan, 23 July 2015—CIMdata, Inc., the leading global PLM strategic management consulting and research firm and Longview Advisors, Inc., organizer of 3D CIC announce the presentation topics for PLM Road Map for the Aerospace & Defense Industry featuring 3D CIC, to be held October 28-29 at The Westfields Marriott – Washington, Dulles. PLM Road Map 2015 for the Aerospace & Defense (A&D) Industry featuring 3D CIC is the must-attend event for A&D industry executives and PLM practitioners globally—providing independent education and a collaborative networking environment where ideas, trends, experiences, and relationships critical to the A&D industry germinate and take root. Day one of the event will be facilitated by CIMdata, producer of PLM Road Map, and will focus on 3D Model-Based Design (MBD) for Product Definition, with emphasis on the following areas: advanced features, data retention, and compliance. Presentations will be made

QuadriSpace™ announced major upgrades to Share3D, the cloud-based technical publishing solution used by manufacturing companies.  As an important part of the QuadriSpace whole product solution, Share3D ( https://www.share3d.com), provides seamless online delivery of technical materials created with Publisher3D and Pages3D.  The latest upgrades to Share3D offer a complete, cloud-based solution for technical publications, including:  Team collaboration for private manufacturing instructions delivery and field service portals   Web publishing for delivering public web pages and embedding 3D in corporate web sites  Online catalogs for delivering interactive 3D catalogs with shopping cart capabilities  Share3D is based on standard web technologies such as WebGL and does not require plugins. This makes it a powerful solution for ubiquitous viewing of 3D within all leading browsers and across PCs, Macs and most mobile devices. The current release adds browser-based touch support for interacting with 3D on iOS and Android mobile devices.  New public sharing features empower manufacturing companies to create and publish web

Gerber Technology has partnered with GE AVIATION (Suzhou) to provide a range of automated systems for composite aeronautic components to be used on the Airbus 350 XWB jet airliner. Key in this project is integration of the Virtek LaserEdge® three-dimensional laser templating system for ply layup. Gerber offers a complete portfolio of automation solutions for the manufacture of composite parts to ensure accuracy, optimize productivity, maximize material utilization and minimize labor requirements. Gerber will provide a series of solutions to GE for the A350 XWB, including a single-layer automatic material supply system, single-layer automatic cutters for pre-impregnated composites, synchronous material receiving systems and operation platforms. The A350 XWB is Airbus’ new family of wide body aircraft for medium- to long-haul airline operations, and features a 25 percent lower fuel consumption and composite materials accounting for 52 percent of its weight. In the global allocation of A350 XWB production, GE AVIATION will provide

ProPlus Design Solutions, Inc. today announced that eSilicon Corporation, a leading independent semiconductor design and manufacturing solutions provider, has selected its high-performance parallel SPICE simulator and its variation analysis platform for advanced intellectual property (IP) designs at 28-nanometer (nm), 16nm and beyond. eSilicon selected ProPlus' NanoSpice for its high accuracy and superior performance, which are needed to tackle the increasing challenges of advanced designs, such as memory characterization, large block simulation and verification. eSilicon also adopted NanoYield for its highly accurate and high-performance high-sigma technologies to analyze the impact of process variations on analog and memory designs, in order to achieve optimum yield versus power, performance and area trade-offs. Both tools have been validated by intensive evaluations for different types of designs and implemented into eSilicon's design flow to help eSilicon develop and deliver complex integrated circuits (ICs) and various memory and custom IP offerings. The tools' technological advantages, including NanoSpice's superior parallel performance

SAP SE today announced its financial results for the second quarter and first half ended June 30, 2015. SAP again delivered exceptionally strong growth in the cloud. Second quarter non-IFRS cloud subscriptions and support revenue grew 129% year-over-year (92% at constant currencies) to €555 million. New cloud bookings, the key measure for SAP’s sales success in the cloud, increased 162% in the second quarter to €203 million. The Company had a very strong non-IFRS cloud and software revenue performance with 21% growth (9% at constant currencies) to €4.06 billion. Non-IFRS operating profit increased 13% (1% at constant currencies) to €1.39 billion. “When I speak with CEOs, they are looking for a road map to digitize their business and to create new business models,” said SAP CEO Bill McDermott. “Our business is thriving because we have the most complete vision for how to make this transition to digital business a simple one. I am

Delcam will demonstrate the new Ember™ 3D printer from Autodesk and the 2015 R2 version of ArtCAM JewelSmith at the TCT exhibition to be held at the NEC on 30th September and 1st October. Autodesk developed the Ember printer as a reference device for Spark, its open 3D printing platform, to show how tightly integrated software and hardware can deliver an improved user experience.  By using digital-light stereolithography to cure liquid resins, Ember creates complex, high-resolution objects, which is desirable for the casting of jewellery. The Ember printer also offers a rapid build speed, having the capability to produce up to ten model rings in an hour or up to twenty model rings in less than 90 minutes. ArtCAM JewelSmith has been developed specifically to allow jewellery manufacturers to increase productivity, improve quality and deliver new designs more quickly, by combining their craft skills and creativity with the power and precision of computer-aided

OPENMill™ is the latest CNC modular control system for control of machining centers from OSAI USA. Designed for highest productivity, finishing quality and ease of use, these new OSAI hardware and software modules provide optimized management of simple 3 axis milling machines to the most complex 5 axis machining centers. “The new OSAI hardware and Software modules allow the optimized management of machining centers, in terms of costs and performance from simple 3 axis milling machines up to more complex 5 axis machining centers.” reports Ivica Simunic, national sales manager for OSAI USA. “The OPENMill system is designed to simplify the installation and commissioning, for a faster time-to-market, as a result of its advanced Software modules and Hardware components”. The OPENMill software programs and controls the machining center managing the execution of programs from either an external CAD-CAM or locally using graphic and parametric programming of cycles and profiles. The programmer does

Paul & Shark, the luxury sportswear brand, has selected Centric Software to provide its product lifecycle management (PLM) software. The company, known for combining technical fabrics with elegant and stylish details, will use Centric 8 PLM to help manage growth and international expansion, according to Andrea Dini, owner and CEO of Paul & Shark. Centric 8 PLM for retail, apparel, footwear, luxury and consumer goods companies will replace a custom product data management (PDM) system at Paul & Shark. “The advantages of PLM, and specifically, Centric PLM, are significant when it comes to speed, efficiency and full visibility across all areas of product development,” says Dini. “For Paul & Shark, moving to Centric was a clear choice.” Centric’s innovative PLM targets key areas for Paul & Shark, adds Dini. “The Sample Review Mobile App, in particular, will help Paul & Shark maintain and enhance excellence in product quality and with the manufacture of materials.” The Centric 8