CIMdata 博客

The Nemetschek Group increased its revenues in the first half of 2014 by 15.6% to EUR 102.3 million (previous year: EUR 88.5 million). On a quarterly basis, revenues rose to EUR 51.3 million, a growth of 14.6% compared to the previous year's quarter (EUR 44.8 million). Again, there was an above-average increase in earnings from operative activities compared to revenues. With a plus of 25.5%, EBITDA rose to EUR 25.6 million in the first six months of 2014 (previous year: EUR 20.4 million). The EBITDA margin improved by 2 percentage points to 25.0% (previous year: 23.0%). From a quarterly perspective, EBITDA grew in the second quarter to EUR 12.4 million, an increase of 29.2% compared to the previous year's quarter. Net income for the year (Group shares) improved considerably in the first half of 2014: at EUR 14.4 million, it was 38.8% higher than that of the previous year (EUR 10.4 million). Accordingly, the

Autodesk, Inc. today announced that it will broadcast its second quarter fiscal 2015 financial results conference call live via its website Thursday, August 14, 2014 at 2:00 p.m. Pacific Time. Autodesk will host a live webcast call atwww.autodesk.com/investors. An audio replay webcast and podcast will also be available after 5:00 p.m. Pacific Time on our website at www.autodesk.com/investors . For more information, please call Autodesk Investor Relations at 415-507-6705.

Agilent Technologies Inc. will release third-quarter fiscal 2014 financial results after the stock market closes on Aug. 14. The company will host a live webcast of its investor conference call in listen-only mode. Date: Thursday, Aug. 14 Time: 1:30 p.m. PDT Web access: www.investor.agilent.com Listeners may log on and select “Q3 2014 Agilent Technologies Inc. Earnings Conference Call” in the “News & Events – Calendar of Events” section. The webcast will remain on the company site for 90 days. In addition, a telephone replay of the conference call will be available at approximately 4:30 p.m. PDT on Aug. 14 through Aug. 21 by dialing +1 855 859 2056 (or +1 404 537 3406 from outside the United States) and entering pass code 65641706.

Aras® today announced that JAMCO and Murata Manufacturing will present at the 2014 Aras Community Event (ACE) in Tokyo, Japan. JAMCO will present successful strategies for multi-CAD product lifecycle management with Aras Innovator™. Murata will share best practices for addressing challenges in electronic circuit design and manufacturing. ACE 2014 Japan takes place October 7, 2014 in Tokyo and October 10, 2014 in Osaka. Details and registration at http://aras.com/plm/002515 ACE 2014 Japan Free to Attend - No Fee (Space is Limited - Registration Required) Details and Registration: http://aras.com/plm/002515 Expanded to two locations, Tokyo and Osaka, ACE 2014 Japan provides attendees an opportunity to learn about next generation product lifecycle management and collaborate on PLM best practices for addressing the complex challenges of global product development. Attendees will see and learn how leading companies around the world have transformed their business processes with Aras, network with peers who are working on advanced PLM initiatives, and meet

Delcam will launch the 2015 version of its FeatureCAM CAM system at IMTS 2014 in Chicago from 8th to 13th September on booth E3222, the largest CAM software booth at the show.  FeatureCAM 2015 includes a range of enhancements in three-axis milling, two-axis and five-axis drilling, turning and turn-mill, and wire EDM to make the software even more powerful and easier to use.   FeatureCAM was the world’s first feature-based programming software when it was launched in 1995.  Constant development since then has ensured that the system has retained its leadership in programming speed and ease of use, while an increased range of strategies has been added to provide more efficient toolpaths that give greater productivity on a wider range of machinery, including mill-turn machines, five-axis mills and wire EDM equipment. In FeatureCAM 2015, programming of complex parts has been made easier and more reliable with the addition of automatic collision checking of

“We are pleased to welcome FS Soluções Tecnológicas into the growing worldwide SURFCAM Reseller network”, say Surfcam General Manager Peter Marton. “As a complete solutions provider, relationships with CNC machine tool distributors and a diverse customer base ranging from job shops to leading machining companies, FS Soluções Tecnológicas Ltda. ME was a natural choice in representing SURFCAM in Brazil”. “SURFCAM is the right fit into our Vero Software product portfolio”, says Sidnei Fraga of FS Soluções Tecnológicas. “The addition of SURFCAM will enable greater diversity in the type of CAD/CAM solutions we can now provide to our customers and the Brazilian machining market”.

Stratasys Asia Pacific, a subsidiary of Stratasys Ltd., is pleased to announce the opening of 3D Printing Experience Centre at its new office located in Toa Payoh, Singapore, providing local support to serve the growing needs in South Asia and Pacific region. The establishment signifies Stratasys’ commitment to the region, offering accessible 3D printing solutions to the market. The new 3D Printing Experience Centre was inaugurated on 30 July, 2014 at an exclusive grand opening event with customers, channel partners and alliance partners in attendance. Mr. Chang Chin Nam, Executive Director of Precision Engineering at the Singapore Economic Development Board (EDB), will be the Guest of Honour officiating the opening ceremony. “Singapore’s manufacturing industry needs to master disruptive technologies like additive manufacturing to strengthen its global competitiveness. The EDB will work with companies to acquire additive manufacturing capabilities to develop innovative value-added products and to build an additive manufacturing ecosystem in Singapore,”

Centric Software, Inc., will open its first Asian office today in Shanghai. The office will be the fifth overseas location for Centric. Other offices are situated throughout Europe, in locations with large concentrations of consumer product brands and retailers. “Looking at the world market, China represents one of the biggest opportunities in the apparel and consumer products market, with both brands and retailers,” says Chris Groves, Centric’s president and CEO. “Centric has a tremendous amount to offer these companies as they grow and expand internationally. The time is now for PLM adoption, and specifically for adoption of flexible, configurable software like the Centric 8 PLM solution.” The announcement of the Shanghai office opening comes on the heels of Centric’s July 29 announcement of $24 million in growth capital as part of its Series D venture capital financing. One of the primary goals of the financing round was to help Centric expand its

Delcam has released a new version of its DentMILL for Roland dental milling software tailored specifically for the production of crowns and bridges in zirconia, wax and PMMA on the Roland DXW-50 desktop machining system.  At the same time, Delcam has released a new related program, DentMILL for Roland Express, which supports the Roland DWX-4 machine. Both programs are based on the 2014 R2 release of Delcam’s extremely successful DentMILL milling software, with the addition of dedicated templates for the automated generation of machining procedures specifically for the Roland equipment, plus libraries of proven tooling and fixturing.  The key difference between them is that DentMILL for Roland supports both the five-axis and three-axis capabilities of the DWX-50, whereas DentMILL for Roland Express provides three-axis toolpaths for the DWX-4. DentMILL for Roland benefits from the many proven strengths of DentMILL.  These include a range of advanced strategies that offer smoother machining to give

Daimler AG has officially certified solidThinking Inspire®, a product that enables design engineers to create and investigate structurally efficient concepts quickly and easily. With this certification, the tool becomes available to all design engineers at the customer as part of the Altair HyperWorks® computer-aided engineering software suite. Traditional structural simulations allow engineers to check if a design will support the required loads; solidThinking Inspire enhances this process by directly generating an optimal new material layout within a given design space using loads as an input. The automotive industry is continually striving for lighter and more structurally efficient designs to meet global emission regulations while improving product performance. With solidThinking Inspire, these goals can now be achieved during the initial conceptual design phase of a new component or system, since the tool supports a simulation driven design process. Furthermore, solidThinking Inspire helps design engineers follow the functional and resource-efficient design rules found