评论

In 2014 TXT e-solutions expects revenues of approximately € 55.8 million, 6% growth with respect to 2013. Both TXT’s Divisions contributed to growth: TXT Perform, specialist of End-to-end Retail in Luxury and Fashion grew +8% and TXT Next, specialist of Software for Complex Operations & Manufacturing grew +4%. International revenues are expected to account for 86% of the TXT Perform division and for 57% of total sales for the Group.   In Q4 2014, software revenues (licences and maintenance) are expected to grow +24% to € 3.3 million and revenues for services +6% to € 10.8 million. Total Revenues are expected to reach € 14.1 million, compared to € 12.9 million in Q4 2013. EBITDA for Q4 2014 is expected to slightly decrease compared to Q4 2013 due to higher R&D expenses for development of Agile-Fit and in-memory solutions (+15%) and higher commercial investments in North America and Europe (+13%). EBITDA for full

Due to what is widely expected to be a major winter storm across the Northeast, which will impact business and travel safety throughout the region, EMC Corporation has moved the date it will publish fourth-quarter and full-year 2014 financial results by one day from January 28, 2015 to January 29, 2015 at approximately 7:00 a.m. ET. EMC will also issue an advisory news release on January 29, 2015 announcing availability of the results via the EMC Investor Relations and the U.S. Securities and Exchange Commission websites. EMC will hold a conference call for investors at 8:30 a.m. ET on January 29 to review the fourth-quarter and full-year 2014 financial results. A live webcast of that call will be available on the EMC Investor Relations website.

ANSYS, Inc. announced today that the Company expects to release its fourth quarter and YTD 2014 earnings on Thursday, February 26, 2015. The Company will hold a conference call conducted by James E. Cashman III, president and chief executive officer, and Maria T. Shields, chief financial officer, at 10:30 a.m. Eastern Time to discuss fourth quarter and 2014 results and future outlook. CONFERENCE CALL INFORMATION: What: ANSYS Fourth Quarter and 2014 Earnings Conference Call When: February 26, 2015 at 10:30 a.m. Eastern Time Participants are encouraged to pre-register for the conference call using the enclosed link. Callers who pre-register will be given a unique PIN to gain immediate access to the call, bypassing the live operator. Participants may pre-register any time, including up to and after the call start time. You will immediately receive an online confirmation, an email with the dial in number and a calendar invitation for the event. To pre-register, go to:  http://dpregister.com/10058823 You may

Tata Consultancy Services (TCS) announced that it has successfully been certified as a Top Employer in Australia 2015 by the Top Employers Institute. The annual international research undertaken by the Top Employers Institute recognizes leading employers around the world: those that provide excellent employee conditions, nurture and develop talent throughout all levels of the organisation, and which strive to continuously optimize employment practices. TCS Australia and New Zealand has been awarded the exclusive Top Employers Australia 2015 Certification. The Top Employers Institute (formerly known as the CRF Institute) globally certifies excellence in the conditions that employers create for their people. It has just announced the results of this year’s research into the employee conditions of significant employers in Asia Pacific. TCS Australia and New Zealand is one of the selected organizations to achieve the Top Employers Australia 2015 certification and is pleased to be officially recognized as a leading employer. Crucial to the Top

Redstack is pleased to announce the addition of MakerBot® to their expanding portfolio of 3D design and engineering solutions. “Redstack is pleased to welcome MakerBot® to our growing portfolio of industry-leading 3d design and engineering technology solutions” noted Michael Lachs, Managing Director of Redstack. Redstack will offer all MakerBot® products, including the newest generation of 3D printers: the award-winning MakerBot Replicator® Desktop 3D Printer, the MakerBot Replicator Mini Compact 3D Printer, and the MakerBot Replicator Z18 3D Printer with its massive build volume and the best price/performance in the extra-large professional 3D printer category. MakerBot Replicator 3D Printers are powered by the user-friendly MakerBot Replicator 3D Printing Platform, which offers an onboard camera, plug and play features, app- and cloud-enabled workflow, and available Wi-Fi connectivity. Redstack will also offer the MakerBot Replicator 2X Experimental 3D Printer, the MakerBot Digitizer™ Desktop 3D Scanner, and MakerBot Filaments and accessories. MakerBot’s 3D printing solutions complement Redstack’s

Wipro Ltd. and Software AG today announced a joint solution platform for streaming analytics that provides real-time actionable intelligence for the Internet of Things (IoT) market.    To address the huge market potential created by streaming analytics in conjunction with IoT and other emerging technologies, Wipro and Software AG have come up with a solution that provides enterprises with a competitive edge by responding to events in real-time with unlimited scalability. Wipro has developed a streaming analytics based IoT solution platform, with a unique architectural framework called ‘Wipro Looking Glass’. In the first release, Wipro is leveraging Software AG’s Big Data Streaming Analytics product suite. The platform provides enterprises with a fast and easy entry into the vast business possibilities offered by the IoT. Wipro Looking Glass current version embeds Software AG’s Streaming Analytics product suite which is designed to integrate, capture, analyze and respond to IoT data. The solution components include a real-time

C3D Labs is pleased to announce that Dr. Nikolay Golovanov's book Geometric Modeling is now available in English. His book outlines the principles of geometric modeling, such as methods for constructing curves, surfaces, and solids. It describes the algorithms and data structures needed to represent geometric objects. The book is intended for those who study, use, and develop geometric modeling systems. Dr. Golovanov is the head of C3D Development Center and has a Ph.D. in Mechanical Engineering. Geometric Modeling is based on the more than 20 years’ experience he gained from developing the C3D geometric kernel, which is used by CAD systems such as KOMPAS-3D, ESPRIT Extra CAD, BAZIS, K3-Furniture, Quick CADCAM, Techtran and others. The English translation is a revised and updated version of the first edition of the book, which was written in Russian. Assisting in the publication of the book was Dr. Joel N. Orr, a long time expert

BobCAD-CAM has released the new Training Professor Video Series for their v27 2 Axis Lathe CAD-CAM software. Traditionally BobCAD-CAM develops multimedia training videos for all of their CAD-CAM products. With the v27 Mill training video series complete they turned to their Lathe CAD-CAM to provide their users with a complete training solution to learning how to program CNC Lathe parts with their CAD-CAM software. The v27 CAD-CAM software is a modular CAD-CAM product with CAD, Milling for 2.5, 3, 4 & 5 Axis modules as well as their Lathe, Nesting, Art and more. Because of this benefit, the BobCAD-CAM customer base can add-on technology as the shop grows their business and their machine tool capabilities without having to pay more for CAD-CAM technology that they simply don’t need. This new Lathe CAD-CAM training video series includes: Video Box Set of CDs with 45 Individual Training Videos 236 Page Digital Workbook (Acrobat PDF) with Training Lessons Corresponding training

AMC Bridge has released the Drawing Diagnostics 3.0 for Autodesk AutoCAD 2015. Drawing Diagnostics is an add-in application for AutoCAD that helps find and fix violated geometric constraints in DXF/DWG drawings, as well as infer additional constraints. AMC Bridge has released Drawing Diagnostics 3.0 for Autodesk AutoCAD 2015. Drawing Diagnostics is an add-in application for AutoCAD that helps find and fix violated geometric constraints in DXF/DWG drawings, as well as infer additional constraints. In addition to providing fixes for critical bugs, Version 3.0 contains capabilities to identify implicit constraints and apply them using constraints manager provided by AutoCAD 2015. Constraints supported by Drawing Diagnostics 3.0 include: End and mid points Vertical and horizontal Parallel, perpendicular Concentric circles and arcs

The Radan computer-aided-manufacturing (CAM) solution by Vero Software, will be exhibited Feb. 8-11 at SOLIDWORKS World 2015, slated to take place at the Phoenix Convention Center in Phoenix, Arizona. Designed as a forum for learning to work more quickly and efficiently, SOLIDWORKS World offers participants educational and networking opportunities, as well as the chance to see cutting-edge technologies. Conference participants are encouraged to learn more about Radan at Booth No. 400 in the SOLIDWORKS Partner Pavilion, where demonstrations of Radan’s productivity-enhancing features will be presented. Among the 180 improvements available in Radan 2015 are nesting upgrades that increase productivity while maximizing materials and maintaining ease of use. Radan now creates more compact nests than ever before by spreading parts more evenly throughout the sheet, and by better utilizing the middle of the sheet to fully utilize materials. Additional nesting upgrades include the automatic application of rectangular nesting when appropriate for nearly-rectangular parts, a time-saving