评论

Dassault Systèmes and Ecole Nationale d'Ingénieurs de Metz (ENIM) today announced that ENIM and 15 other universities in ten countries around the world provide their engineering students with a unique social innovation and collaborative learning experience, based on Dassault Systèmes' 3DEXPERIENCE platform. The pioneering “Global Factory” program, now preparing for its third year, brought together engineering students from a total of 16 different universities in seven different time zones, some 11 hours apart, by leveraging the multidisciplinary 3DEXPERIENCE platform from Dassault Systèmes.  All participants use the 3DEXPERIENCE platform and cloud technology for design authoring, digital manufacturingU, scientific simulation and analysis, as well as collaboration. The outcome of this program is a rich computer model of a complete automobile factory, optimized in multiple aspects, including building, floor layout, process definitions, throughput, robots and machine programs, operator ergonomics, and complex systems. Participants in Global Factory Universidad Nacional de Cuyo (Argentina) Universidad Nacional de La Matanza (Argentina) Universidad Catholica de Córdoba

CONTACT Software, who co-authored the "Code of PLM Openness", is now involved in a further important initiative for open systems in the field of product lifecycle management. Open Services for Lifecycle Collaboration (OSLC) is an organization that uses established Web technology as the basis for developing standards for integrating proprietary software and product lifecycle tools and the associated data and workflows with the aim of achieving end-to-end lifecycle processes. Standards like this open up application scenarios in which product information that is distributed over different IT solutions can be explicitly linked and used across system boundaries. This facilitates collaboration in interdisciplinary project teams, since it is no longer the case that joint development tasks will always result in the need to exchange data. And for companies, the outlay involved in implementing and maintaining a whole range of point-to-point interfaces is also reduced. The software landscape in product development is one of the

Cimatron Limited announced today that dozens of delegates from all continents attended the recent CimatronE Sales Conference in Tel Aviv. "Cimatron has enjoyed both revenue and profit growth over the past years and this success is largely attributed to our international sales network comprised of both wholly owned subsidiaries as well as independent resellers," said Ira Bareket, Corporate Vice President of Sales and Marketing. "We have been blessed by an excellent team of professionals around the world who are both friendly and experienced, providing the highest level of service and support to our growing customer base. "It was overwhelming to witness customer testimonials from all around the world, serving a variety of industries and manufacturing state of the art products - all produced with molds and press tools designed and manufactured using CimatronE. "The conference presented a great opportunity to expose the new version of our integrated CAD/CAM software, CimatronE 12, which is scheduled for release within

Panel members will tackle best practices, strategies, and technologies for dealing with requirements management to support systems engineering today. ANN ARBOR, Michigan, 27 May 2014—CIMdata, Inc., the leading global PLM strategic management consulting and research firm announces that representatives from GM, ANSYS, Autodesk, ESI, IBM Rational, and SBE Vision will come together in a panel discussion at CIMdata’s Systems Engineering workshop in Cincinnati on June 24th. The panel will be moderated by CIMdata’s Vice President, Systems Engineering Knowledge Council Lead, John MacKrell. MacKrell will be joined by Craig Brown of General Motors, David Vredenburgh of SBE Vision, Diego Tamburini of Autodesk, Fadi Ben Achour of ESI, Greg Gorman of IBM Rational, and Dr. Todd McDevitt of ANSYS. The panel members will bring their considerable collective experience to focus on best practices, strategies, and technologies available for dealing with requirements in systems engineering. Topics to be covered include: requirements decomposition and allocation, requirements management

Company Information Accenture is a global management consulting, technology services, and outsourcing company, with approximately 289,000 people serving clients in more than 120 countries. Accenture’s Website Office Locations and Addresses  Company Contact Anthony Hatter Media & Analyst Relations Email:  \n 该Email地址已收到反垃圾邮件插件保护。要显示它您需要在浏览器中启用JavaScript。 Public / Private Public Limited Company (NYSE: ACN) Product Family Description Accenture’s Product Lifecycle Services help companies organize, develop, and manage products and services, from idea to retirement. Their services provide greater engineering efficiency and predictability to reduce cost and increase return on R&D investment. Accenture’s end-to-end Product Lifecycle Services span the full spectrum of strategy, digital, technology, and operations: Strategy - including innovation and portfolio strategy, business case and roadmap, frugal innovation, product/process complexity management, R&D operating model design, organizational change management Digital – such as analytics based portfolio optimization, PLM in the cloud, virtual prototyping and simulation, 3D printing Technology – for example PLM custom application and implementation, systems re-design, unified ALM-PLM, application architecture, data

Edgecam have set up a structured training course for carbide cutting tool manufacturer Seco. Consisting of classroom-style training, Edgecam’s course was designed to provide Seco’s Technical Centre Customer Project Engineers with specific knowledge of basic milling, turning and Part Modeler. Edgecam Strategic Partnership Manager Wesley Tonks says: “They are now using the knowledge they’ve gained through this training, to program more efficiently and effectively using Edgecam on in-house customer projects. Seco and Edgecam already had what the software’s describes as a technical collaborative partnership, and Wesley Tonks says the training reinforces the message of being total solution providers. “Seco are advising customers not only about the best carbide cutting tools that are right for a particular project, but they are now in a more authoritative position to offer programming advice when visiting customers.          He says that training, overall, is becoming more vital across the manufacturing industry to compensate for a declining skill base.

CAM software developer Delcam, cutting tool manufacturer SGS, and machine tool supplier DMG Mori will present two joint seminars on high-efficiency machining at SGS’s recently-opened UK headquarters in Wokingham, near Reading, on Wednesday 2nd July.  Morning and afternoon sessions will be presented during which the three companies will describe their latest developments to increase machine-tool productivity.  Each set of presentations will followed by live demonstrations of Delcam’s award-winning Vortex high-efficiency area-clearance strategy on DMG Mori machine tools using SGS cutters. The Vortex strategy, which was recently announced to be the Best CADCAM or Control System at the MWP Awards, offers substantial time savings by allowing deeper cuts to be made using the full flute length of solid carbide tools as the cutting surface.  A series of trials run by Delcam, on different machine tools within its Advanced Manufacturing Facility fitted with SGS tooling, has shown that time savings of up to

Mentor Graphics Corporation announced financial results for the company’s fiscal first quarter ended April 30, 2014. The company reported revenues of $252.2 million, non-GAAP earnings per share of $0.11, and a GAAP loss per share of $0.02. “First quarter results were better than our guidance, driven largely by strong revenue growth in scalable verification, particularly emulation,” said Walden C. Rhines, chairman and CEO of Mentor Graphics. “During the quarter Mentor introduced a revolutionary new Enterprise Verification Platform - one of the most significant verification product announcements in Mentor’s history. We also acquired Berkeley Design Automation, a recognized leader in analog, mixed-signal and RF circuit verification. This high-impact acquisition, along with the increase in our quarterly dividend and continued share repurchases, demonstrates Mentor’s balanced approach to capital deployment.” The Mentor® Enterprise Verification Platform combines Questa® advanced verification solutions, Veloce® OS3 global emulation resourcing technology, and the Visualizer™ debug environment into a globally accessible

OPEN MIND Technologies USA, Inc. and DMG MORI ELLISON Technologies will continue to present the successful Flip Over 5-Axis Technical Event in Ohio on June 3 and 5. The June 3 event will be in the Hamilton (Cincinnati) Ellison office and the June 5 event in the Brecksville (Cleveland) office. The first edition of this seminar was held in southern California and was attended by over 80 participants. Flip Over 5-Axis is a seminar and workshop event focused on introducing 5-axis techniques to people currently working with 3 and 4-axis machine tools. Through straight-forward CAM software programming tools and intuitive user interface on NC controls, customers can program, set-up and machine complex parts with fewer set-ups and higher quality than typical with multi-operation procedures and complex work offsets to reach multiple faces. “The obstacles to entering 5-axis programming are not large. And they are widely used in today’s market”, states Alan

3D Systems announced that it will be bringing its 3D PRINTING 2.0 capabilities to the Atlantic Design & Manufacturing show at the Jacob K. Javits Convention Center, Booth 408, New York, June 10-12, 2014. 3DS plans to demonstrate its powerful 3D design-to-manufacturing products that are specifically designed for the production floor and the engineer’s desktop. The company invites attendees to experience the first and only professional full-color plastic 3D printer, try its fab-grade multi-materials 3D printer, and see the output of its latest direct metal 3D printers, all capable of printing fully functional parts and assemblies and available for immediate purchase. Showcasing key components of 3DPRINTING 2.0, 3DS’ AD&M lineup will include demonstrations of its latest 3D printers, 3D engineering and design software, and samples from its diverse materials capabilities including direct metal, full-color plastic, multi-material and production grade Selective Laser Sintering (SLS®) and Stereolithography (SLA®). The following will be on display: First and