评论

 PDF Key takeaways: IBM’s 12th annual Software Group analyst event drew 100+ analysts, in town to engage with senior IBM managers (only VPs or above, outside of analyst relations) The “Smart” message is used across IBM, and it is the IBM Software Group that enables products, infrastructure, and other assets to embody that intelligence The depth and breadth of their offerings and expertise is impressive, and they are making progress bringing it all to bear on specific accounts and problems IBM Software Group held their 12th annual Analysts Insights event in Stamford, CT on November 19-20, 2013. (To review the Twitter stream, please search using the hashtag #swgai.) Attendance was limited to just over 100 leading analysts. The event operated like clockwork due to the efforts of the large and very helpful IBM Analyst Relations team. But the analysts were there to engage with IBM Software Group’s senior leaders: all IBMers in attendance were at

 PDF Key takeaways: CIMdata and MarketKey collaborated on the first-ever combined PI Congress and PLM Road Map, 9-10 October 2013 at the Indian Lakes Resort, Bloomingdale, Illinois As many as five parallel tracks kept the 330+ attendees moving to hear the many informative speakers Overall the move to Chicago was a success, bringing a new audience and energy to the PLM Road Map, providing new opportunities for knowledge sharing and collaboration On October 9 and 10, 2013, over 330 delegates attended the Product Innovation (PI) Congress 2013 and PLM Road Map™ at the Indian Lakes Resort in the Chicago suburbs. For the first time, CIMdata delivered its annual PLM Road Map conference in conjunction with the PI Congress, helping to draw the large crowd, populated with business and technical professionals from multiple manufacturing and process industries and countries. Stan Przybylinski, CIMdata’s Vice President of Research, acted as the PI Congress Chair while Peter Bilello, CIMdata’s

This week at Autodesk University, Autodesk Structural Bridge Design 2014 was unveiled as one of several software updates and introductions aimed at expanding BIM workflows across the full lifecycle for buildings and infrastructure.  Following closely on the heels of our Autodesk Vehicle Tracking 2014 announcement last month, the new Autodesk Structural Bridge Design 2014 software will help address the urgent need to repair or replace the world’s aging bridges. According to the American Association of State Highway and Transportation Officials, within the next 15 years, almost half of America’s bridges will exceed 50 years of age, surpassing the life span for which they were designed.  Technological advancements may be the key to addressing this urgent bridge dilemma by helping to accelerate design processes and reducing costs. Obviously, the urgent need to repair or replace aging bridges is not exclusively an American challenge, it’s one widely shared around the globe. To help bridge designers tackle the challenges

The 2013 release of Delcam’s ArtCAM Pro CADCAM software for artistic applications has made it much easier to create complex designs, with a new approach called interactive distortion modelling.  This allows users to distort either vectors or reliefs within ArtCAM models by bending or stretching the design, and to see the results in real time. Unlike most other CADCAM systems, ArtCAM Pro is aimed at skilled artisans rather than engineers and requires little knowledge of engineering or computing.  It has been particularly successful in the signmaking, woodworking and engraving industries.  In these areas and in other artistic applications, ArtCAM Pro allows users to increase productivity, improve quality and deliver new designs more quickly, by combining their craft skills and creativity with the power and precision of computer-aided manufacturing. The addition of interactive distortion modelling in the latest release makes ArtCAM’s unique free-relief modelling even more powerful.  Interactive distortion modelling makes it possible

IronCAD, LLC, and GrabCAD, announced the GrabCAD Integration within the IronCAD Design Collaboration Suite of products. This integration delivers enhanced collaboration capabilities to IronCAD's customers within the extensive GrabCAD community and with users own Workbench shared projects. The GrabCAD Integration allows users to transfer their work directly to GrabCAD creating shared IronCAD files and preview images. GrabCAD users today are already using the GrabCAD Library to share their work with the world, and the GrabCAD Workbench to share projects with trusted colleagues. Now it's even easier for them to transfer IronCAD files directly, simply by selecting "Upload to GrabCAD". "The IronCAD Design Collaboration Suite today provides real collaboration by enabling users to communicate design data seamlessly throughout their design process within their organization." commented Cary O'Connor, IronCAD's VP of Marketing, "The GrabCAD Integration is a natural extension for our solutions and we are excited to offer customers the direct integration to share

Autodesk, Inc. unveiled several exciting new technologies for Building Information Modeling (BIM) today at its annual user conference, Autodesk University. With this announcements and numerous other recent innovations, Autodesk continues to extend BIM value across the full lifecycle of the built environment for Architecture, Engineering and Construction (AEC) professionals in the building and infrastructure industries. “We are expanding the reach of BIM on multiple fronts -- into conceptual design on one end of the spectrum and into construction on the other. Our advancements are empowering professionals to move from designing objects and simply representing their ideas in 2D and 3D to designing in context while optimizing and better predicting the performance of their designs,” said Amar Hanspal, Autodesk senior vice president of Information Modeling and Platform Products. “Autodesk is helping to drive higher levels of productivity into the building design, infrastructure and construction industries both in the office as well as in the field with

3D Systems announced the immediate availability and shipping of Geomagic Capture®, a family of powerful, integrated desktop scanner and software tools for professional scan-based design and quality inspection ranging in price from $14,900 to $24,900. The company is exhibiting its entire Geomagic Capture family December 3-6 at EuroMold 2013 in Frankfurt, Germany as part of its 3DPRINTING 2.0 showcase. Geomagic Capture is available in six configurations, and each package includes a compact, ultra-precise, blue light LED scanner directly integrated with Geomagic software including: Geomagic Capture for SolidWorks® Geomagic Capture for SpaceClaim®  Geomagic Capture for Design X Geomagic Capture for Design Direct Geomagic Capture for Control Geomagic Capture for Verify Using Geomagic Capture, designers and engineers can for the first time instantly incorporate real world objects into CAD at their desktop. Using easy and intuitive software with direct CAD plugins Geomagic Capture compresses design time, increases productivity and delivers significantly faster product development cycles. Geomagic Capture packages address a variety of applications including

Synopsys, Inc., reported results for its fourth quarter and fiscal year 2013. For the fourth quarter of fiscal 2013, Synopsys reported revenue of $504.9 million, compared to $454.2 million for the fourth quarter of fiscal 2012. Revenue for fiscal year 2013 was $1.962 billion, an increase of 11.7 percent from $1.756 billion in fiscal 2012. "Synopsys achieved excellent results in fiscal year 2013, and we are seeing strong product and customer momentum," said Aart de Geus, chairman and co-CEO of Synopsys. "Amid a landscape characterized by a mix of economic uncertainty and aggressive investment in designs, Synopsys is in a very strong competitive position, as many key customers rely on us to accelerate their differentiation and speed their time to market." GAAP Results On a generally accepted accounting principles (GAAP) basis, net income for the fourth quarter of fiscal 2013 was $56.9 million, or$0.36 per share, compared to $29.1 million, or $0.19 per share, for the fourth quarter of fiscal 2012. GAAP net income for fiscal

Cimatron Limited announced that its integrated CAD/CAM software CimatronE now enables safe connectivity to DMG MORI machines and controls without the need for custom post processors or machine simulations. “CimatronE has long offered one of the largest, error-free libraries of post-processors for practically all 3-axis and 5-axis machines and all leading controllers, and we are happy to now go one step further in providing safe connectivity to all DMG MORI machines,” said Mr Ira Bareket, Cimatron’s VP Sales and Marketing. The development is the result of cooperation between Cimatron and DMG MORI that enables CimatronE customers to use the company’s machines with MAPPS controls without the need for custom post-processors or machine simulation models. CimatronE users continue to program parts in the way they are used to but, rather than running a standard Cimatron post-processor, a DMG MORI-specific APT-CL file is generated in CimatronE. This will then be imported into the Manufacturing

Please fill out the form below to download CIMdata's 3D Geometric Search Executive Summary. Required fields are marked with an asterisk * {form 4}