新闻动态

EMC Corporation today reported first-quarter 2016 financial results. First-quarter consolidated revenue was $5.5 billion, down 2% year over year. GAAP net income attributable to EMC was $268 million in the first quarter, and GAAP earnings per weighted average diluted share was $0.14 in the first quarter, up 8% year over year. Non-GAAP1 net income attributable to EMC was $603 million in the first quarter, and non-GAAP1 earnings per weighted average diluted share in the first quarter was $0.31, flat year over year. EMC generated $932 million in operating cash flow and $588 million in free cash flow3 in the first quarter, and ended the quarter with $15 billion in cash and investments. EMC returned $227 million to shareholders via a quarterly dividend. Joe Tucci, EMC Chairman and CEO, said, “We had a solid first quarter, generally in-line with our expectations when adjusted for an excess of unfulfilled orders at the end of the

Dassault Systèmes today announced IFRS unaudited financial results for the first quarter ended March 31, 2016. These results were reviewed by the Company’s Board of Directors on April 20, 2016.  Summary Highlights (unaudited) Q1 non-IFRS total revenue of €693.5 million, DS guidance of €685-695 million Q1 non-IFRS EPS €0.51, includes 5 cents related to tax reserve reversal Q1 non-IFRS recurring revenue up 8% exfx, representing 74% of software revenue Q1 net operating cash flow of €309 million, up 17% 3DEXPERIENCE new licenses revenue up 33% exfx in the first quarter 2016 financial objectives reaffirmed Board of Directors proposes 9% increase in annual dividend for the 2015 fiscal year To view the original press release, please click here. Search for Dassault Systèmes on CIMdata.com

Trimble announced today that it is partnering with the University of Cambridge to collaborate on research to advance technology development in the engineering and construction industry. Trimble will work closely with the Laing O'Rourke Centre's Construction Information Technology Laboratory (CIT). CIT is a state-of-the-art research facility with a mission to solve complex engineering problems and automate difficult construction tasks through decision support tools. These tools would recognize data patterns, retrieve useful information and generate knowledge of the built environment. The construction industry is highly information-intensive and requires extensive data and information exchange during the construction process between project stakeholders. To enhance competitiveness and efficiency, engineering and construction companies are adopting new forms of information technology to improve productivity, scheduling, quality and costs of a project. The goal of the Trimble Sponsorship Program is to enable research focused on advanced, accessible and intuitive technologies that can drive increased collaboration for the Design-Build-Operate (DBO)

Altair, RUAG and Morf3D have recently entered a non-exclusive partnership for cooperation in advancing additive manufacturing (AM) for Aerospace applications.  The partnership will address the full additive manufacturing process including design, analysis, build, test and certification. The partnership aims to offer a start-to-finish service primarily to the Aerospace industry for AM including space, propulsion, aircraft interior, and airframe applications. Other application areas will be pursued as opportunities present themselves. While working together jointly on publications, training, research, and technical papers, etc., to facilitate this cooperative effort, Altair will lead the provision of solidThinking Inspire™ software for design and analysis, Morf3d will lead program management, part production, R&D and associated quality control and RUAG will take the lead on design, analysis, documentation, testing and certification. The team will use the AM facility Morf3D's Innovation Center which includes various DMLS systems and the test facilities at Ruag.  "We are excited to participate with Ruag and Morf3d

CIMdata, Inc., the leading global PLM strategic management consulting and research firm, announces an upcoming free educational webinar, “The Technology Impact on Ideation and Idea Management.” The webinar will take place on May 12 at 11:00 a.m. (EDT) and will share examples of modern ideation and idea management approaches. The webinar will be an hour long and those attending will: gain an understanding about proven best practices and lessons learned that lead to better ideas, be able to identify the desirable characteristics of software platforms that support ideation and idea management, and will have a better understanding of the cultural and skill implications of modern digital approaches to ideation and idea management. According to the webinar host, Dr. Suna Polat, CIMdata’s Director for Collaborative Innovation & Social Product Development Consulting, “Ideation and idea management are foundational capabilities for organizations wanting to innovate better and more systemically. Web and mobile technologies

Free educational webinar focused on the importance of innovating better and more efficiently, will take place on May 12, 2016. ANN ARBOR, Michigan, 21 April 2016—CIMdata, Inc., the leading global PLM strategic management consulting and research firm, announces an upcoming free educational webinar, “The Technology Impact on Ideation and Idea Management.” The webinar will take place on May 12 at 11:00 a.m. (EDT) and will share examples of modern ideation and idea management approaches. The webinar will be an hour long and those attending will: gain an understanding about proven best practices and lessons learned that lead to better ideas, be able to identify the desirable characteristics of software platforms that support ideation and idea management, and will have a better understanding of the cultural and skill implications of modern digital approaches to ideation and idea management. According to the webinar host, Dr. Suna Polat, CIMdata’s Director for Collaborative Innovation & Social Product Development

With the new scanner line PrimeScan, AICON 3D Systems provides an attractive entry-level solution for highly precise 3D digitization of industrial components. The PrimeScan is an entirely new development. It works with the renowned AICON OptoCat software, and thus uses the same algorithms for fast creation of highly precise point clouds with highest data quality as the high-end scanner lines StereoScan and SmartScan. The PrimeScan has a compact design: the base area equals a DIN A4 sheet, and the scanner weighs only 3 kg. The working distance is short. Thus, it is suitable as desktop solution and for applications under cramped spatial conditions in industrial surroundings. Measuring fields between 50 mm and 1000 mm are available. Hence, every component size can be optimally captured. Depending on the required resolution and precision, different camera resolutions are available: two, five or eight megapixel. The PrimeScan is equipped with either blue-light-technology for industrial

Infor today announced significant momentum for the Infor Implementation Accelerator program, which delivers preconfigured application suites designed to help speed time to value for customers in various industries. Infor has licensed more than 50 Implementation Accelerators per year since its 2013 fiscal year, and as of today, there are 26 types of Implementation Accelerators available to customers across more than 16 industries and product areas globally. Implementation Accelerators are preconfigured solutions based on the latest version of Infor application suites. They are designed to deliver certain core industry application processes, along with reduced implementation times, risks and costs, both in the cloud or on-premises, for customers in specific industries. Each Implementation Accelerator project plan is developed by Infor Consulting Services (ICS), a global team of more than 3,500 trained resources ICS employs a proprietary process known as the Infor Deployment Method, which is designed to provide a unified approach to

ZW3D, one of the world’s leading suppliers of advanced CAD/CAM solutions for the manufacturing industry, today announced that it has been chosen by Right Way Industrial Co., LTD. (RW Group), a professional auto parts provider. RW Group, founded in 1964, is a listed company based in Taiwan. It specializes in the manufacture and sale of pistons and forging products for automobiles, locomotives, engine equipment, and aviation industries. As a 80% export-oriented company, RW Group also engages in the OEM & ODM for automobiles, motorcycles, outboard engines and industrial engines. Even though RW Group has a strong position in its markets, it constantly refines production technologies and introduces up-to-date computer-based management, in a bid to maintain a high level of quality, improve R&D efficiency and expand product offerings to break into new markets. After thorough evaluation, RW Group purchased ZW3D CAD/CAM. With diversified product design functionalities, ZW3D assists RW Group to

Intergraph® Process, Power & Marine has signed a reseller contract with Dynaflow Research Group (DRG) to sell DRG’s BOSfluids® software in the European region. BOSfluids is a three-dimensional fluid flow analysis solution that models steady state and transient flow in liquid or gas carrying piping systems. The software has a bi-directional interface with Intergraph’s pipe stress analysis software Intergraph CAESAR II®, eliminating redundant work processes and improving the quality of pipe stress and fluid flow analysis. The software simplifies the way both static and transient flow analysis of gas and liquids in pipe systems are conducted. It analyses fluid transients and relates this information to the forces, pressures, flow rates and velocities in the piping system with engineering accuracy, improving the quality and safety of the analysis. BOSfluids analyses and predicts problems in the pipe systems, such as water hammer and pressure surge, enabling users to avoid breakage of the