新闻动态

Bentley Systems has announced project finalists in the 2015 Be Inspired Awards, a global program recognising the world’s most outstanding infrastructure projects across design, engineering, construction, and operations. One of the oldest continually operating airports in the world and one of Australia’s most important infrastructure project, Sydney Airport, has this year been nominated under the category of ‘Innovation in Government’ for its work on Airport Infrastructure Facilities Management. Also nominated under this category is Singapore Land Authority a statutory board under the Ministry of Law whose mission is to optimise land resources for the economic and social development of Singapore. It has been selected for the board’s work in Mapping Singapore in 3D. Further information on these projects will be available closer to Bentley Systems’ The Year in Infrastructure2015 Conference in November. The finalists will present their innovative projects in front of their peers, the jurors, and the more than 100 members of the media at

CIMdata, Inc., the leading global PLM strategic management consulting and research firm, announces an upcoming free webinar, “Innovation Management Solutions – Connecting the Dots!” The webinar will take place on November 11 at 11:00 a.m. (EST) and will share the early findings from CIMdata’s research on Enterprise Innovation Management (EIM). According to webinar co-host, CIMdata’s Director for Collaborative Innovation & Social Product Development Consulting, Dr. Suna Polat, “Many enterprises struggle with inefficiencies in their innovation due to disjointed processes, solutions, and data. Since product complexity is increasing while innovation cycles are becoming more compressed, enterprises must address these inefficiencies for competitive advantage.” Despite the potential benefits of adoption, enterprises are slower to invest in EIM. CIMdata feels this is due largely to the confusion, uncertainty, and ambiguity from the substantial differences in terminology, solution approaches, strategies, best practices, and benefit claims they hear from innovation management solution providers. In response, CIMdata

Webinar will take place on November 11, 2015 and will share an emerging innovation system framework. ANN ARBOR, Michigan, 6 October 2015—CIMdata, Inc., the leading global PLM strategic management consulting and research firm, announces an upcoming free webinar, “Enterprise Innovation Management Solutions – Connecting the Dots!” The webinar will take place on November 11 at 11:00 a.m. (EST) and will share the early findings from CIMdata’s research on Enterprise Innovation Management (EIM). According to webinar co-host, CIMdata’s Director for Collaborative Innovation & Social Product Development Consulting, Dr. Suna Polat, “Many enterprises struggle with inefficiencies in their innovation due to disjointed processes, solutions, and data. Since product complexity is increasing while innovation cycles are becoming more compressed, enterprises must address these inefficiencies for competitive advantage.” Despite the potential benefits of adoption, enterprises are slower to invest in EIM. CIMdata feels this is due largely to the confusion, uncertainty, and ambiguity from the substantial

Autodesk has confirmed its commitment to Digital Footwear Creation by unveiling the new Autodesk Footwear group that will be fully focused on supporting designers and manufacturers of all types of footwear. The ranges of products previously named Delcam Crispin and Delcam Custom Orthotic Insoles have been combined under the Autodesk Footwear brand.  The new group brings together the existing software solutions, plus technologies and services for the footwear industry available from Autodesk. All of the staff from the Delcam businesses have been moved into the new group, meaning that customers continue to benefit from the combined support of the development, sales and technical staff, and their vast experience in the production footwear and orthotic insole industries. As part of its commitment to the current market and to the Future of Making Things, Autodesk Footwear combines solutions for the design and manufacture of production footwear and custom insoles to enable the creation of

AVEVA today announced exciting additions to the AVEVA World Summit 2015 agenda.  This year’s global event is being held in Dubai, UAE from 20-22 October. AVEVA customers from across the world’s process, plant, power and marine industries will share their project and operational experience, explaining how AVEVA technology is helping them to address technical and strategic business challenges. Examples of customer presentations include industry giant EDF, who will discuss how, by adopting a data centric approach with AVEVA software, they met the BIM challenge of the UK NNB generation project. Petrofac will present its strategy for delivering mega projects and how AVEVA technology has helped to enable greater efficiency. Arctech Helsinki Shipyard will share its adoption of AVEVA Marine for the design and construction of several highly innovate new vessels. Exciting new products will be launched by AVEVA at the Summit, such as AVEVA’s latest decision support software. It combines information management with exquisitely detailed,

Trimble announced today the latest version of Tekla® Structural Designer software that enables structural engineers to analyze and design steel and concrete buildings efficiently by combining analysis and design into a single, seamless process. Building on its sophisticated loading and analysis functionality, fully automated design, high-quality documentation and seamless Building Information Modeling (BIM) collaboration, this release brings engineers new features for more efficient and cost effective building design. Enhancements to Trimble's Tekla Structural Designer include expanded seismic analysis and design features that automate accidental torsional effects and the required seismic design combinations, allowing engineers to use one product all the way through to code-compliant design. Other time saving features include the automation of tedious and complex tasks such as wind loading calculations, floor vibration checks and floor loading. In addition, Tekla Structural Designer now offers expanded beam design options and integration with cellular beam provider, ASD Westok, and its proprietary Cellbeam software that simplifies design

Synopsys, Inc.today announced a new, breakthrough ATPG and diagnostics technology that delivers 10X faster run time and 25 percent fewer test patterns to shorten schedules, accelerate silicon debug and reduce test time and cost. Innovative, memory-efficient engines for test generation, fault simulation and diagnosis execute finely segmented threads on all available server cores, maximizing throughput while minimizing the number of patterns required to achieve targeted test coverage. Combined with Synopsys' DFTMAX™ compression, this new test technology will enable design teams to meet their test quality, time and cost goals with unprecedented speed. "Increasingly complex SoC designs and shrinking schedules require fast turn-around for generating high-quality manufacturing test patterns," said Roberto Mattiuzzo, SoC integration and DFT methodologies manager in STMicroelectronics' Digital and Mixed Processes ASIC division.  "Working with Synopsys on their new ATPG technology should produce faster ATPG run times and significantly fewer test patterns to help us test first-silicon samples sooner and minimize

Dassault Systèmes will host a webcast and a conference call on Thursday, October 22, 2015, to discuss its operating performance for the third quarter 2015 ended September 30, 2015. The management of Dassault Systèmes will host the webcast at 8:30 AM London Time - 9:30 AM Paris Time and will then also host the conference call at 9:00 AM New York Time - 2:00 PM London Time - 3:00 PM Paris Time. Both the webcast and the conference call will be available via the Internet by accessing Dassault Systèmes’ website at http://www.3ds.com/investors/. Please follow the directions on the main page to link to the audio and connect to the website at least fifteen minutes prior to the webcast or conference call to register, download and install any necessary software. The webcast and conference call will be archived for 1 year. To view the original press

Visual 2000 International Inc., the leading end-to-end software solutions provider for apparel businesses, is the official platinum sponsor for the Apparel East Summit, to be held on October 29, 2015 at the Roosevelt Hotel, in New York City. The one day event features keynote speeches and panel discussions involving industry leaders in the fields of product development, business intelligence, and enterprise management for fashion companies. The conference sessions cover a wide range of topics including assortment planning, leveraging free trade agreements, and providing the best omni-channel customer experience. Vice president of research and development, Charles Benoualid said, “It's a great opportunity to meet with our peers and customers to discuss the current state of the industry, and how it may evolve in the next few years. Beyond meeting new professionals in the industry, we see it as an important forum for discussion, and to ensure our apparel software maintains its position at the top of the

Roboris Srl, developer of Eureka Virtual Machining, an innovative software application for simulating CNC machine tools and programming robots, and MCM Spa, leading company in designing and manufacturing machining centers, flexible automation systems and customized manufacturing processes, are pleased to present the result of a joint development at EMO 2015 in Milan, Italy. At the MCM booth at EMO (Hall 5, Booth D05) a Deburring Application powered by Eureka, especially optimized for MCM will be on display. Visitors will have the opportunity to see side by side both the actual robot performing the deburring process on a workpiece,  and the simulation on a computer screen of the same operations on the same workpiece. The deburring toolpath is completely programmed off-line using Eureka Virtual Machining, customized in order to achieve the maximum productivity of the MCM robotic cell. Intuitive and easy to use tools are provided to create the toolpath directly on the