新闻动态

Rand Worldwide, Inc. announces its financial results for the quarter ended March 31, 2015. For the three months ended March 31, 2015, Rand Worldwide, Inc. reported total revenues of $23,474,000 and operating income of $3,677,000. The Company's overall gross margin percentage was 51.8% which was slightly lower than the same quarter in the prior year due to the revenue mix. Total selling, general and administrative expenses were 5.2% lower in the current quarter compared with the same period of the prior fiscal year as a result of decreased commission expense and reduced occupancy costs. As a result, the Company reported income from continuing operations of $1,857,000, or $0.06 per diluted share for the quarter ended March 31, 2015, compared with $2,756,000, or $0.05 per diluted share, for the quarter ended March 31, 2014. For the nine months ended March 31, 2015, the Company reported total revenues of $66,671,000, and operating income of

Theorem Solutions will be attending this year’s Siemens PLM Connection in Dallas, from 18th-21st May 2015. As a long standing Siemens PLM solution partner and Vendor Member of the JT Open initiative, the team from Theorem Solutions will be there to showcase our latest PLM productivity enhancing solutions for the Siemens NX and JT user. If you drop by the Theorem booth (No.106), we will be demonstrating the latest version of our Publish 3D suite of products as well as showcasing data archiving and CAD migration solutions.  Publish 3D is our  3D PDF solution for the NX and JT user .Imagine being able to share any interactive 3D model with anyone in the world without the requirement for CAD viewing software.  Come and see how interactive 3D PDFs are revolutionizing knowledge sharing and collaboration inside organizations, and up and down the supply chain. Theorem will also be available to offer expert advice on how best to work with CATIA

The Object Management Group® (OMG®) announced today the full agenda for the Model Based Engineering in PLM and Manufacturing special event. This event will spotlight how model based engineering standards will usher in a new era of manufacturing with respect to how Industry 4.0 and Smart Manufacturing strategies will affect the interoperability of the data infrastructure of complex products. This event will occur on June 18th at the Radisson Blu Hotel in Berlin, Germany. The agenda will focus on the following presentations and speakers: Welcome and Introductions: Dr. Richard Soley, Chairman & CEO, Object Management Group Dr. Andreas Goerdeler, Head of the Department of Information Society; Media, BMWi·          The Dilema of Standardization in Industry 4.0: Wolfgang Dorst, Head of the Industry 4.0 Department, BITKOM An Architectural Model for Industry 4.0 - A Commonly Approved Base for Standardization: Dr. Peter Adolphs, Head of WG2 "Standardization" in the Platform Industry 4.0, Pepperl+Fuchs Sven-Olaf Schulze, President, German

If you’ve heard about the exciting features coming in Vectorworks 2016, you can see them for yourself at booth #3181 at the AIA Convention 2015, where Vectorworks Architect experts are on hand to answer all your questions about the current version of the software, as well as preview three tools we know you’ll love once 2016 hits the market this fall: Marionette: As the first and only cross-platform graphical scripting environment available in a BIM authoring tool, Marionette lets Vectorworks Architect users create complex design variations and intelligent parametric objects in a Python-based environment. Energos: Vectorworks Architect users can make critical performance decisions based on real-time feedback directly in their models with Energos, the only BIM authoring tool that uses the highly respected Passivhaus calculation method to create building energy use analysis results. Project Sharing: Design teams will be able to work concurrently in the same Vectorworks file using
a multi-user environment to streamline project workflows,

Desktop Engineering announces that version 16.1 of the ANSYS portfolio of engineering simulation solutions and the new ANSYS Enterprise Cloud solution for enterprise simulation from ANSYS Inc. (Canonsburg, PA), is its Editor’s Pick of the Week for May 13, 2015.  “ANSYS Enterprise Cloud makes available the entire ANSYS application suite,” writes Anthony J. Lockwood, editor at large for Desktop Engineering. “It’s supported by Amazon Web Services, which should simplify and speed up your transition to cloud-based simulation. And it is engineered to give you consistent, enterprise-specific simulation workflows and data to more engineers wherever they are located.” “ANSYS Enterprise Cloud supports end-to-end simulation workflows, including pre-processing and 3D graphical post-processing,” says Lockwood. “That means you waste minimal time transferring files like you do with a batch cloud solution. You access it as a single-tenant environment, which further helps secure your data.” “ANSYS Enterprise Cloud can also be customized for your unique simulation processes,”

Zuken has launched the latest version of its CR-8000 single and multi-board design solution. This platform is a product-centric design application for creating complex product design. The release includes cross-discipline collaboration, multiple user constraint management and support for global standards. The CR-8000 platform has enhanced hierarchical and module-based system design capabilities. This, according to the company, makes it easier for engineers from all disciplines to contribute to the system design. Also added is the functionality to reuse constraints. The Design Gateway allows multiple team members to replicate constraints, reducing design time. Constraint information for each functional block is now directly associated with the block circuit, making copying, managing and maintaining possible. “We launched CR-8000 with a vision that design processes are moving from a traditional PCB-centric approach to a more collaborative 3D product-centric process. That vision is being realized as design teams adopt CR-8000 and benefit from product-centric capabilities such as combining 3D multi-board

Synopsys, Inc. today announced that Broadcom Corporation extended its license agreement providing access to Synopsys' DesignWare® ARC® Processors for an expanded range of advanced multimedia and networking system-on-chip (SoC) designs. Broadcom standardized on ARC processors to deliver advanced video compression capabilities in its SoCs for high-volume consumer devices. Deploying optimized video compression technology is increasingly important to conserve network bandwidth as global service providers stream high definition (HD) and ultra HD video content to a broader range of devices. "We have been a longstanding and successful user of ARC processors in our multimedia products," said Daniel Marotta, executive vice president and general manager, Broadband & Connectivity Group at Broadcom Corporation. "The new agreement enables us to take advantage of the ARC processors' power-performance efficiency in a wider range of products to deliver more differentiated solutions to our customers." Synopsys' DesignWare ARC Processor portfolio consists of configurable 32-bit RISC processors that are optimized to meet the

Gerber Technology has launched upgrades on two software technologies, Axis 2.1 controller software for the Gerber cutter Z1 automated cutting system and the CutWorks 9 design, nesting and cutting software. The Z1 cutter is a prime solution for single-ply cutting in a wide range of applications including apparel, furniture, transportation, and other industrial fabrics. It now features Axis 2.1 controller software, allowing users to optimize workflow with an intuitive user interface that provides simple step-by-step guidance throughout the entire cutting process, greatly reducing operator errors and increasing throughput, Gerber informs in a press release. The Axis 2.1 software also provides Z1 users the option to take advantage of several powerful new features, including a variety of new reporting capabilities and vacuum regulation. Tom Gordon, Gerber director of industrial products said, “The new user interface in the Z1 cutter is much simpler and user-friendly. Users now have this holistic, well-rounded experience with a quick

Delcam has launched the 2015 R3 release of its FeatureCAM feature-based CAM software.  This includes a range of enhancements to give high-quality results on all types of machine tool, including complex mill-turn equipment and five-axis machining centres, while retaining the rapid programming times for which FeatureCAM is renowned. Full details on the new release, including video demonstrations of the main enhancements, are on the FeatureCAM Learning Zone – www.delcam.tv/fc2015/lz  FeatureCAM was the world’s first feature-based programming software when it was launched in 1995.  Constant development since then has ensured that the system has retained its leadership in programming speed and ease of use, while an increased range of strategies has been added to provide more efficient toolpaths that give greater productivity on a wider range of machinery, including mill-turn machines, five-axis mills and wire EDM equipment. The most significant new option is the ability to duplicate the physical constraints of the machine tool

Avaap announced today that Destination XL Group, Inc., the largest specialty retailer of men’s big and tall apparel, selected Avaap to upgrade its legacy version of Infor Lawson® to the Infor 10x version of Infor Lawson Enterprise Financial Management.  Infor Lawson Enterprise Financial Management with 10x technology is a cloud-based enterprise financial management solution supporting a full range of financial activities. Avaap will leverage its industry experience in the retail vertical to enable integration and help Destination XL Group achieve a more cost-effective infrastructure while utilizing the Infor technology to its fullest advantage. Destination XL Group, like other retail organizations, relies on its financial systems to support growth goals and respond to business change. Infor Lawson Enterprise Financial Management implemented by Avaap is expected to help Destination XL Group modernize its infrastructure, consolidate information across the enterprise and deliver reliable financing data to decision-makers. “Avaap came strongly recommended, had solid references and demonstrated deep