新闻动态

Romax Technology Ltd. and Comet Solutions, Inc. announce a partnership between the two companies. Specifically, the agreement will provide users of RomaxDESIGNER software with the ability to create automated simulation processes that integrate CAD, FEA, Romax and others. For over 25 years, RomaxDESIGNER has been the world leader in analytical solutions for system analysis of transmission, axle, and driveline systems. RomaxDESIGNER enables users to quickly and accurately perform detailed analyses of critical performance attributes, including durability, efficiency and dynamics, including advanced features such as manufacturing variation and planetary sideband analysis. Comet provides simulation automation and standardization processes by seamlessly integrating the variety of tools used by gearbox/transmission product engineers, including CAD, finite element meshers, RomaxDESIGNER, structural analysis tools, fatigue life tools, packaging/tolerancing tools, and other detailed gear design tools. By integrating data and tools within a single automation environment that includes optimization capabilities, Comet enhances the system analysis aspects of RomaxDESIGNER, providing product engineers

Lectra announces that a German competitor's machine was declared as infringing a Lectra's patent protecting a solution for cutting one-piece-woven (OPW) airbags in Germany. The July 2015 final court ruling stated that the competitor's OPW-airbag-cutting machine makes use of Lectra patent EP 1 321 839's inventive technical teaching, thus legally acknowledging that the machine infringes the patent. The Lectra patent describes an OPW-airbag-cutting machine as integrating three elements: a cut-on-the-fly cutting system for cutting patterns in sheet material; a vision system for locating on-the-fly landmarks in sheet material; and a control system that allows a pattern to be cut at the same time as the vision system locates the next landmark, while the sheet material continues to progress along the cutting table. The German Federal High Court confirmed Lectra's patent as valid in September 2014. The patent runs until December, 2022 and covers Canada, China, the Czech Republic, France, Germany, Japan, Portugal, Spain,

Cadence Design Systems has established a new R&D facility in Pune, which will develop configurable processors and related products. Two years ago, Cadence acquired Tensilica, which put up an R&D facility in Pune in 2006. "The team in Pune is working on cutting-edge development of digital signal processors (DSP) and other IP technology, and the Pune facility is among the best-in-class globally," Business Line quoted Jaswinder Ahuja, corporate vice president and managing director at Cadence, as saying. The new facility will engage in designing software for different Tensilica DSP cores, creating an integrated design environment for Xtensa processors, contributing to RTL verification and providing technical support to customers globally. Cadence recently launched the Tensilica Vision P5 digital signal processor (DSP), its flagship high-performance vision/imaging DSP core. This imaging and vision DSP core offers up to 13X performance boost, with an average of 5X less energy usage on vision tasks compared to the previous generation IVP-EP imaging and video DSP. Cadence,

Sunday Afternoons, designer and manufacturer of technical and lifestyle headwear, has selected Centric Cloud Product Lifecycle Management (PLM) to streamline its design and production process. Sunday Afternoons will be using Centric Cloud, specifically designed with small businesses in mind and available as subscription-based Software as a Service (SaaS). Centric Cloud uses proven industry best practices and intuitive technologies developed from Centric's extensive experience with implementing PLM solutions for larger businesses. Since 1992, when founders Robbin and Angeline Lacy invented their first product, the Adventure Blanket, Sunday Afternoons has produced an expanding range of hats and accessories for the whole family. Now, more than 20 years later, with rapidly growing distribution in 20 countries, more than 80 unique products and an ongoing transformation in branding, Sunday Afternoons is a family business entering a new phase of growth. Joey Fallon, Chief Operating Officer at Sunday Afternoons said, “We were living in spreadsheets and email threads,

More than 60 of Delcam’s partner organisations, including many of the world’s leading providers of machine tools, cutting tools and inspection equipment, are taking part in the EMO exhibition being held in Milan from 5th to 10th October.  This unrivalled group of partners will help Delcam to reinforce its position as the world’s leading supplier of CAM software and services, with the largest development team in the CAM industry.  “Companies looking to invest in CAM software are often worried whether the toolpaths generated will work as well on the machine tool as they do on the computer,” commented Delcam’s Marketing Manager, Peter Dickin.  “Our close relationships with machine tool, cutting tool and metrology companies mean that customers can gain the maximum benefit from our machining and inspection software on a wide range of equipment.”  “Despite the improving economic conditions, subcontractors still need to increase their productivity, shorten lead times and improve their

Bentley Systems has announced project finalists in the 2015 Be Inspired Awards, a global program recognising the world’s most outstanding infrastructure projects across design, engineering, construction, and operations. One of the oldest continually operating airports in the world and one of Australia’s most important infrastructure project, Sydney Airport, has this year been nominated under the category of ‘Innovation in Government’ for its work on Airport Infrastructure Facilities Management. Also nominated under this category is Singapore Land Authority a statutory board under the Ministry of Law whose mission is to optimise land resources for the economic and social development of Singapore. It has been selected for the board’s work in Mapping Singapore in 3D. Further information on these projects will be available closer to Bentley Systems’ The Year in Infrastructure2015 Conference in November. The finalists will present their innovative projects in front of their peers, the jurors, and the more than 100 members of the media at

CIMdata, Inc., the leading global PLM strategic management consulting and research firm, announces an upcoming free webinar, “Innovation Management Solutions – Connecting the Dots!” The webinar will take place on November 11 at 11:00 a.m. (EST) and will share the early findings from CIMdata’s research on Enterprise Innovation Management (EIM). According to webinar co-host, CIMdata’s Director for Collaborative Innovation & Social Product Development Consulting, Dr. Suna Polat, “Many enterprises struggle with inefficiencies in their innovation due to disjointed processes, solutions, and data. Since product complexity is increasing while innovation cycles are becoming more compressed, enterprises must address these inefficiencies for competitive advantage.” Despite the potential benefits of adoption, enterprises are slower to invest in EIM. CIMdata feels this is due largely to the confusion, uncertainty, and ambiguity from the substantial differences in terminology, solution approaches, strategies, best practices, and benefit claims they hear from innovation management solution providers. In response, CIMdata

Webinar will take place on November 11, 2015 and will share an emerging innovation system framework. ANN ARBOR, Michigan, 6 October 2015—CIMdata, Inc., the leading global PLM strategic management consulting and research firm, announces an upcoming free webinar, “Enterprise Innovation Management Solutions – Connecting the Dots!” The webinar will take place on November 11 at 11:00 a.m. (EST) and will share the early findings from CIMdata’s research on Enterprise Innovation Management (EIM). According to webinar co-host, CIMdata’s Director for Collaborative Innovation & Social Product Development Consulting, Dr. Suna Polat, “Many enterprises struggle with inefficiencies in their innovation due to disjointed processes, solutions, and data. Since product complexity is increasing while innovation cycles are becoming more compressed, enterprises must address these inefficiencies for competitive advantage.” Despite the potential benefits of adoption, enterprises are slower to invest in EIM. CIMdata feels this is due largely to the confusion, uncertainty, and ambiguity from the substantial

Autodesk has confirmed its commitment to Digital Footwear Creation by unveiling the new Autodesk Footwear group that will be fully focused on supporting designers and manufacturers of all types of footwear. The ranges of products previously named Delcam Crispin and Delcam Custom Orthotic Insoles have been combined under the Autodesk Footwear brand.  The new group brings together the existing software solutions, plus technologies and services for the footwear industry available from Autodesk. All of the staff from the Delcam businesses have been moved into the new group, meaning that customers continue to benefit from the combined support of the development, sales and technical staff, and their vast experience in the production footwear and orthotic insole industries. As part of its commitment to the current market and to the Future of Making Things, Autodesk Footwear combines solutions for the design and manufacture of production footwear and custom insoles to enable the creation of

AVEVA today announced exciting additions to the AVEVA World Summit 2015 agenda.  This year’s global event is being held in Dubai, UAE from 20-22 October. AVEVA customers from across the world’s process, plant, power and marine industries will share their project and operational experience, explaining how AVEVA technology is helping them to address technical and strategic business challenges. Examples of customer presentations include industry giant EDF, who will discuss how, by adopting a data centric approach with AVEVA software, they met the BIM challenge of the UK NNB generation project. Petrofac will present its strategy for delivering mega projects and how AVEVA technology has helped to enable greater efficiency. Arctech Helsinki Shipyard will share its adoption of AVEVA Marine for the design and construction of several highly innovate new vessels. Exciting new products will be launched by AVEVA at the Summit, such as AVEVA’s latest decision support software. It combines information management with exquisitely detailed,