CIMdata 博客

Mentor Graphics Corp., today ushered in a new era of emulation by announcing new applications for the Veloce® emulation platform. The new Veloce Apps—Veloce Deterministic ICE, Veloce DFT and Veloce FastPath—overcome critical system-level verification challenges in complex SoC and system designs. They run on an upgraded Veloce OS3 operating system that significantly accelerates design compile cycles, gate-level flows, and the time it takes to review results ("time to visibility"). The combination of Veloce Apps on Veloce OS3 puts more capabilities into the hands of more engineers more quickly than hardware-centric strategies. Each of the new Veloce Apps addresses a specific verification issue: Veloce Deterministic ICE overcomes unpredictability in ICE environments by adding 100 percent visibility and repeatability for debug, and provides access to other 'virtual-based' use models; Veloce DFT accelerates Design for Test (DFT) verification prior to tape-out to minimize the risk of catastrophic failure, and significantly reduces run times when verifying designs

Synopsys, Inc. today announced it will showcase its Software Integrity Platform, a comprehensive suite of software security testing solutions for software signoff, at the RSA Conference in San Francisco (February 29-March 4). Through a combination of best-in-class automated testing and analysis tools, Synopsys' Software Integrity Platform enables organizations to reduce risk, cost, and time to market by rapidly detecting and fixing critical security vulnerabilities throughout the software development lifecycle and supply chain. The Software Integrity Platform supports robust application security testing programs for software ranging from enterprise web applications to embedded software and IoT devices. The platform facilitates 'software signoff', an emerging concept in software development and testing that helps provide elevated confidence in the quality and security of software by introducing testing gates at critical progression points throughout the software development lifecycle and software supply chain. Synopsys, a global leader in electronic design automation and semiconductor IP, entered the software security

The latest version of Delcam’s ArtCAM Pro artistic CADCAM software will be demonstrated on Booth #723 at the ISA Sign Expo to be held at the Orange County Convention Center in Orlando, Florida, from April 20th to 23rd.  The software features improvements in design and machining, including easier designing with vectors, more design options with real-time updating and faster machining simulations. Unlike most other CADCAM systems, ArtCAM Pro is aimed at skilled artisans rather than engineers and requires much less knowledge of engineering or computing.  It has been particularly successful in the signmaking, woodworking and engraving industries.  In these areas and in other artistic applications, ArtCAM Pro allows users to increase productivity, improve quality and deliver new designs more quickly, by combining their craft skills and creativity with the power and precision of computer-aided manufacturing. ArtCAM users that design with vectors will benefit from two new options in the latest release. 

Lectra is pleased to announce that Galeries Lafayette, the French internationally renowned department store leader, has chosen Lectra Fashion PLM, its collaborative platform, to support the development of its collections. “Galeries Lafayette aims to enhance its ability to develop its own brands. Lectra’s PLM solution is the most suited for improving the workflow and facilitating cooperation between the different teams involved in the product development process,” declares Delphine Chevalier, Purchasing Director, Private Brand, Galeries Lafayette. In a complex and globalized environment, fashion companies have to adapt their work methodology to meet new challenges in their markets. Leveraging its experience with best practices and in-depth knowledge—thanks to forty years of expertise in fashion, Lectra has developed a product lifecycle management solution that helps businesses bolster their performance while streamlining their processes. “Thanks to our advanced technology as well as our team’s skills and expertise in the fashion industry, we are pleased to contribute to

Altair will present its software and service solutions for the design and optimization of composites as well as several customer successes at JEC World, the largest international show of the composite industry, on March 8-10 in Paris. Composite materials are used in almost every industry as they not only have very good and customizable structural characteristics but also enable lightweight design for many kinds of products. They can be a challenge to work with as composites require special design and development processes to garner the full benefits of their use. Altair, an established optimization expert for over 20 years, offers deep tools and expertise toward the design and optimization of composites. With Altair's solutions, engineers are guided to an optimal material layout for laminate and honeycomb composite structures as well as to an optimal product design. Highlighted in the Altair booth this year will be a multi-material automotive decklid, featuring a TCA Ultra Lite and carbon fiber resin transfer

CIMdata, Inc., the leading global PLM strategic management consulting and research firm announces that Dr. Bjorn Cole, a systems engineer at the Jet Propulsion Laboratory (JPL), will make a presentation at CIMdata’s Simulation-Driven Systems Development Knowledge Council workshop which will take place at Michigan State University’s Management Education Center in Troy, Michigan on April 27. The event is being held in conjunction with NAFEMS’ Engineering Analysis & Simulation in the Automotive Industry: Emerging Standards & Practices event which will take place at the same location on April 28. The systems modeling community has matured greatly in the past few years since the release of the Systems Modeling Language 1.0. There are now auxiliary standards for execution (fUML, 2011; Precise Semantics for Composite Structures (PSCS), 2015) and tools to support interconnectivity between system models and analyses. In his presentation, “Integration of SysML models with M&S tools for Behavior Modeling & Simulation,” Dr.

Presentation will share details of an integrated systems modeling and analysis platform built from components that are entirely commercial or open-sourced with components in active use at JPL for flight project work. ANN ARBOR, Michigan, 25 February 2016—CIMdata, Inc., the leading global PLM strategic management consulting and research firm announces that Dr. Bjorn Cole, a systems engineer at the Jet Propulsion Laboratory (JPL), will join David Long, the immediate past president of INCOSE (The International Council on Systems Engineering) to make a presentation at CIMdata’s Simulation-Driven Systems Development Knowledge Council workshop which will take place at Michigan State University’s Management Education Center in Troy, Michigan on April 27. The event is being held in conjunction with NAFEMS’ Engineering Analysis & Simulation in the Automotive Industry: Emerging Standards & Practices event which will take place at the same location on April 28. The systems modeling community has matured greatly in the past few

CD-adapco, a global provider of multidisciplinary engineering simulation and design exploration software, today announced the release of STAR-CCM+® v11.02, its industry-leading engineering simulation solution. This release delivers new modeling capabilities and brings productivity and usability enhancements that forward the company’s mission to help customers discover better designs, faster. “STAR-CCM+ v11 continues to emphasize our focus on Multidisciplinary Design eXploration (MDX),” said CD-adapco Senior VP of Product Management, Jean-Claude Ercolanelli. “Our primary objective is to equip our customers with the necessary tools to elevate their confidence in the simulation results and help them make critical design decisions quickly and with certainty, giving them a competitive advantage in the marketplace.” To this end, STAR-CCM+ v11.02 introduces Data Focus, a unique visualization technique to explore and interrogate results interactively. Data Focus provides a live and interactive link between quantitative numerical data in plots and qualitative visual data in scenes. This link between quantitative and qualitative analysis

Moods of Norway, a fashion lifestyle brand located in Stryn, Norway, has implemented Gerber Technology's YuniquePLM™ V6 web-based product lifecycle management software to manage its design and development process, while it continues to blend Norwegian heritage with international lifestyle and fashion. "With YuniquePLM V6, we are able to have an individual perspective on products from the 'get go,' allowing designers and buyers to monitor and focus on the progress of various products without the use of multiple systems, data files and complexity," said Moods of Norway Head of Product Thomas Frodal. Kristin Karlsen, head product developer at Moods of Norway, added, "As first time PLM users we have been supported by a team of dedicated industry experts from Gerber and Amatec, Gerber's distributor in Norway, during the implementation. We look forward to increased efficiency and productivity from the improved collaboration and greater access to data in a single location." "We are very pleased to have Moods of Norway, an iconic Scandinavian brand,

Tech Soft 3D today announced the latest release of Tetra 4D Converter, a powerful solution for creating 3D PDFs to support multiple workflows, enabling the model based enterprise by allowing users to package constrained models with all necessary product manufacturing information into a lightweight, sharable format. Tetra4D Converter 2016 now supports exporting 3D data to ACIS (SAT) files as well as updated support for reading the most recent versions of Solid Edge (ST8) and SolidWorks (2016). The 2016 release of Tetra4D Converter also features additional functionality for controlling the display of 3D PMI and views in 3D PDF files. "This latest version of Tetra 4D Converter continues our tradition of delivering the most powerful products to our customers, that are also easy to use, flexible and compatible with multiple CAD formats," said Dave Opsahl, Vice President of Corporate Development for Tech Soft 3D. "We are confident that our customers will love