评论

Agilent Technologies Inc. today announced that Nitronex, a GaAs labs company and leading producer of GaN-on-silicon RF power devices, has selected Agilent to provide a complete GaN design flow that spans both device modeling and circuit simulation. The flow uses Agilent EEsof EDA's IC-CAP model extraction software and Advanced Design System (ADS) circuit and system simulator-both market-leading platforms in RF and microwave design. Gallium nitride has emerged as a semiconductor material of choice for designing RF power devices, providing a formidable combination of high bandwidth, efficiency and power. In the case of Nitronex, whose GaN devices use silicon as a substrate, there is an added inherent cost advantage to its approach. Nonetheless, as with the development of any high-power device, designing for high levels of reliability, performance and yield requires investing in leading modeling and simulation technology. "Agilent's software platforms offer a clear advantage for our design process," said David Runton, vice president of engineering at

Cimatron Limited announced today that it will be releasing its fourth quarter financial results on Thursday, February 27 th, 2014, before the US markets open. Cimatron's management will host a conference call that same day, at 9:00am EST, 16:00 Israel time. On the call, management will review and discuss the results, and will also be available to answer questions by investors. To participate, please call one of the following teleconferencing numbers. Please begin placing your call at least 5 minutes before the conference call commences. USA: +1-888-668-9141 International: +972-3-9180609 Israel: 03-9180609 For those unable to listen to the live call, a recording of the call will be available from the day after the call under the investor relations section of Cimatron's website, at: http://www.cimatron.com.

Mentor Graphics Corporation announced they will release financial results for the company's fourth fiscal quarter, ended January 31, 2014 on Thursday, February 27, 2014 at approximately 1:15 pm Pacific. Live audio webcast at http://www.mentor.com/company/investor_relations. Please register at this website prior to the scheduled call time of 2:00 pm Pacific. Conference call replay: Begins February 27, 2014 (4:00 pm Pacific); Ends March 6, 2014 (11:59 pm Pacific). USA 800-475-6701; International 320-365-3844; Access code: 319415

Zuken announces the expansion of its CADSTAR reseller network in North America with the addition of Fusion CADSoft. CADSTAR is Zuken’s powerful and easy-to-use desktop PCB design software for small to medium-sized workgroups. “Fusion CADSoft has a wealth of technical expertise and a track record of understanding their customers’ work environment. They have genuine enthusiasm for CADSTAR and the part they will play in supporting expansion in North America”. - Jeroen Leinders, CADSTAR Worldwide Sales Manager Fusion CADSoft has already worked with Zuken for three years as a distributor of its market-leading E3.series electrical design software. “In my years of working with Zuken I’ve been impressed by the company’s ethics and their upfront style of partnership with us. This helps the relationship with our customers as we’re speaking from experience when we say we have confidence in both the company and their products”. - Rich Leodore, Managing Partner, Fusion CADSoft Fusion CADSoft is based on

Actify Inc., announced an update on its progress for the first half of its 2014 fiscal year. "I am extremely pleased with our business momentum," said Chris Jones, Actify CEO and president. "It's not an easy feat to follow a record 40% growth from our previous fiscal year; however, I'm pleased to announce a record breaking first half. We maintain our dedication to provide manufacturing industries with solutions that help make a difference and the market is clearly seeing our value." In 2013, Actify announced its ActifyInsight offering and its business strategy to focus on providing exceptional Product Data Intelligence solutions to the market. Actify's unique ability to combine product data with business intelligence components has prospects and customers wanting to learn more about Actify's suite of solutions beyond its flagship product, SpinFire Professional. Actify's recent major website update further supports the brand's strategy focusing on Product Data Intelligence solutions, covering not only

MSC Software Corporation today announced a cooperation with BASE Ltd., located in Belfast, Northern Ireland. BASE Ltd has been appointed as an agent for licensing and distributing MSC Software solutions into Northern Ireland and the Republic of Ireland. Ian Tasker, Regional Manager of MSC Software says, "We are delighted to be working with an agent who has been using our leading products for over 20 years, and who is active in the engineering sector. We are confident that BASE can deliver both sales and maintenance agreements for us as they are recognized as a business experienced in both engineering and the use of our software."  Ian Tasker adds, "BASE currently solves problems for some of the world's leading engineering and aerospace companies, helping to develop aircraft for the future. With their highly trained engineers they provide structural and dynamic analysis and product design on both metallic and composite structures." BASE's Strategic Business Director,

ModuleWorks has been confirmed as one of the best places to work. In a nationwide survey of IT employers across all of Germany, ModuleWorks has been recognized as one of the 50 best employers in the IT industry. ModuleWorks is a developer of CAM (Computer Aided Manufacturing) plug-in software components with headquarters in Aachen, Germany and three international subsidiaries. It licenses its components to other CAD/CAM software companies and academic institutions around the globe.  A close analogy to the ModuleWorks business model would be the automotive industry where several different car brands may share the same engine or gearbox – ModuleWorks provides the software ‘engine’ for many different CAD/CAM software packages. The 2nd annual survey to find “Best IT Employers 2014” was organized by Great Place To Work® in co-operation with their media partner, Computerwoche. Great Place to Work is a global research, consulting and training organization that helps businesses develop great workplaces.

Aras® today announced the availability of a new commentary report from industry analyst firm CIMdata titled “Aras Innovator: Redefining Customization & Upgrades”. CIMdata explains why the Aras platform technology makes customizing the out-of-the-box PLM solution suite easier, and how even heavily customized Aras implementations are upgraded for free with the Aras Subscription. Download the CIMdata Report at http://aras.com/plm/002291 “Could this be a true innovation, a PLM solution that is highly customizable to satisfy specific business requirements without causing negative side effects? A solution where you could easily and extensively customize its look and feel, data model, and even operational behavior without worrying about the upgrade process? The simple answer is Yes,” said Peter Bilello, President of CIMdata. “This places Aras Innovator in a special position that merits investigation both by companies searching to replace an existing PLM solution and by those looking to implement one for the first time.” CIMdata’s Key Takeaways: Aras Innovator

The BIMobject® Team is proud to announce a Norwegian BIMobject® Business Partner - BIMpartner, founded by Mr Tom R. Holbein. BIMpartner is providing services within property development, focusing on the use of BIM technology. BIMpartner will work with sales of BIMobject® solutions and services, locally in Norway. Tom R. Holbein has a background in architecture and engineering services, onshore and offshore, with experience in most areas where detail and extensive documentation is of significant importance for the projects. BIMpartner possesses extensive experience within 3D/VR- visualization and BIM/CAD-LCM (life cycle management). BIMpartner will initially focus on the Norwegian market since the demand for BIM content is expected to increase rapidly. Norway is one of the nations requiring the use of BIM for publicly funded building projects.   "We have used BIMobject® effective from the first time we discovered the application, and experienced how important the detail level of smart objects are within the BIM

BETA CAE Systems S.A., announces the further expansion of its operations, with the establishment of a subsidiary company in Italy. BETA CAE Italy Srl, based in Turin, has the mission to enhance the customers service experience for the CAE engineers in Italy and contribute to the further deployment of BETA CAE Systems portfolio. The upgrade of the regional representative office of BETA CAE Systems in Turin to a subsidiary entity was a natural evolution after the warm welcome from our customers and the significant market share growth of the recent years. This evolution is one more demonstration of our company's commitment to bring our best-in-class software solutions and know-how in multi-disciplinary CAE processes, closer and faster to the market. "The reinforcement of our presence in Italy is of significant importance for both our company and our customers", said Emidio Giordano, Vice President and Managing Director of BETA CAE Italy. "The positive response we