评论

Microsol Resources Corporation is proud to announce that it has again earned "Autodesk Partner of the Quarter" for the Americas, this time for the third quarter of the 2014 Autodesk fiscal year. This designation recognizes Microsol Resources not only for its sales performance and outstanding customer service, but also for the growth of its operations and its investment in the business of selling Autodesk software. Microsol Resources was selected from more than 200 Autodesk partners due to the increase in software sales to customers in the architectural, engineering and construction (AEC) industry whom they have served for more than 25 years, as well as the substantial increase in new product sales. Additionally, Microsol Resources’ growth in subscriptions validates the company’s commitment to customer satisfaction and dedication to customer retention. Microsol Resources and Autodesk work closely to apply technical and consulting resources to help users fully implement the expanded Autodesk solution set. “It

Flagship training program will kick off the year in Santa Clara, California ANN ARBOR, Michigan, December 19, 2013 — CIMdata, Inc., the leading global PLM strategic consulting and research firm announces that the first CIMdata PLM Certificate Program for 2014 is to be held in Santa Clara, California. The program will take place from March 17-21, 2014. The CIMdata PLM Certificate Program is the flagship offering of CIMdata PLM Leadership — the PLM industry’s most comprehensive non-biased education offering for today’s PLM professionals. CIMdata’s PLM Certificate Program equips PLM professionals at several levels with the tools they need to successfully address the inherent challenges to PLM strategy development and implementation. This assessment-based certificate program includes a personalized classroom experience, individual and team-based exercises, and individual evaluations of achievement. In addition, the program provides intensive and extensive exposure to a team of CIMdata experts. Upon successful completion of the program, participants receive a

Please fill out the form below to download CIMdata's Modern Engineering Simulation  Environments“Maximizing the value of your CAE investments” White Paper Required fields are marked with an asterisk * {form 7}

Oracle Corporation announced that both fiscal 2014 Q2 GAAP and non-GAAP total revenues were up 2% to $9.3 billion. GAAP new software licenses and cloud software subscriptions revenues were unchanged at $2.4 billion, while non-GAAP new software licenses and cloud software subscriptions revenues were down 1% to $2.4 billion. Both GAAP and non-GAAP software license updates and product support revenues were up 6% to $4.5 billion. Hardware Systems revenues, including hardware systems products and hardware systems support, were unchanged at $1.3 billion. Hardware systems products revenues were down 3% to $714 million. GAAP operating income was down 2% to $3.4 billion, and the GAAP operating margin was 37%. Non-GAAP operating income was down 1% at $4.2 billion, and the non-GAAP operating margin was 46%. GAAP net income was down 1% to $2.6 billion, while non-GAAP net income was up 1% to $3.2 billion. GAAP earnings per share were up 5%

Optitex, a provider of 2D and 3D CAD/CAM and Virtual Prototyping software solutions announced the signing of an affiliate agreement with JETS Digital, a leader in the distribution, support and installation of CAD and CAM solutions in Australia and New Zealand. Recently, Optitex announced the opening of the Hong Kong office as part of its mission to spread its global knowledge, expand its offering to a new client base worldwide and deliver even better support for existing customers. The affiliation with JETS Digital will leverage the capabilities of both companies by combining strong local market expertise with leading-edge software solutions and JETS Digital’s respected client base. The affiliation will secure an enhanced route to market for Optitex’s advanced software solutions. "Australia and New Zealand are significant and advanced markets for us in Asia Pacific, with the potential to impact other countries as well” Said Ofer Asif, VP Asia & Emerging Markets, Optitex.

Granta Design announced details of their latest advances in simulation and materials information management to help Additive Manufacturers improve research, design, testing, and simulation. These developments are the result of Granta’s involvement in two European Framework Seven projects (NANOMICRO and AMAZE) focused on the field of Additive Manufacturing, also known as Additive Layer Manufacturing or ‘3-D printing’.   Additive Manufacturing is an area in which the use of simulation and increased experimental automation require effective management of large quantities of materials information. Factors such as the need to accurately capture complex processing histories make this a challenge. Granta technology can help to meet this challenge, and has been validated and extended through involvement in these projects. This announcement follows last week’s final NANOMICRO meeting.  In the 4-year project, ten partners have been developing a layer-wise manufacturing approach using highly focalised powder/heat fluxes (with dimensions in the microns range) for metals and cermets (ceramic-metallic composites).

Accenture has completed its acquisition of PCO Innovation – an independent international consulting and systems integration group that specializes in product lifecycle management (PLM) software technologies. The acquisition enhances Accenture’s deep industry capabilities and the full range of services it provides clients in the design, building and management of systems and processes essential to driving their large-scale PLM transformation programs. PCO Innovation’s employees focus on supporting clients as they organize, develop and manage new products and services throughout their lifecycle, helping them bring them to market more quickly and efficiently. This acquisition follows the completion of another PLM-related acquisition by Accenture of PRION Group in October, and announced plans to acquire the industrial and embedded software development and services business of evopro group. “Accenture’s experience with clients has shown that PLM can get products into the market faster and more efficiently, increasing the speed of product launches by up to 55 percent and reducing operational and product development

TradeStone Software today announced that Urban Outfitters has gone live with TradeStone's PLM solution. TradeStone's MLM software suite serves as a global platform that simplifies and manages all aspects of design, development and delivery for the retailer's 3,000+ supplier community and estimated 800 internal users. The enhanced visibility, communication and collaboration that TradeStone has provided Urban Outfitters has enabled them to be more agile, increase productivity and deliver more innovative and on-trend items to stores. Urban Outfitters is utilizing TradeStone's PLM solution to manage color, material and artwork libraries, define color palettes, specify product construction details and packaging, develop Bills of Materials, track samples and build technical specifications. TradeStone PLM is replacing the retailer's Web PDM solution, bridging the gap that previously existed between the design team and the other teams using TradeStone to develop the retailer's novel and distinctive fashion, footwear and accessories. Urban Outfitters has now deployed the full TradeStone Merchandise Lifecycle Management suite including PLM, Collaborative Sourcing, Order Management, Global Trade Management, Supplier Community Management and Business Intelligence. "TradeStone is one of our more strategic technologies in helping us to deliver value

SolidCAM’s Japanese reseller Tactx collaborated with OKK and Tungaloy at the recent MECT 2013 exhibition in Nagoya, Japan. The biennial show, which has been running since 1987 is the country’s largest for machinery, CAD/CAM, tooling and associated equipment, and this year welcomed 93,741 visitors. Sharing the OKK booth, Tactx used SolidCAM iMachining to program a demonstration part, for the exhibition, to show off the capabilities of the OKK HMC 400. This machine was set up for live cutting at the show to include a video screen, to make it easy to see the machining in progress. At the Tungaloy booth, visitors could see the latest Tunghold and Tungcap tooling systems as well as the company’s range of inserts and carbide tools and, at the same time, pick up information on SolidCAM. Both OKK and Tungaloy appreciate the power of SolidCAM, which led to the collaboration at MECT 2013. The software’s patented iMachining and

MSC Software Corporation and Nizhniy Novgorod State Technical University, named after R. E. Alekseev (NNSTU n. a. R. E. Alekseev, Nizhniy Novgorod, Russia), one of the leading technical universities in the Volga Federal District of Russia, announce the expansion of their collaboration to train engineers in automotive, shipbuilding, energy and a number of other engineering industries. In 2011, MSC Software and NNSTU n. a. R. E. Alekseev created the Competence Center for engineering analysis to support the region's high concentration of leading Russian companies in major manufacturing industries. To equip the Competence Center with technology, MSC Software licensed the use of its MSC Nastran, Patran, Adams, Marc, Dytran, Easy5, and Sinda software products. MSC actively supports the work of the specialists at NNSTU n. a. R. E. Alekseev by regularly conducting training and information seminars on methods of working with the software, as well as consulting support for teaching academic disciplines. Experts of NNSTU n. a. R. E. Alekseev have