Trending at CIMdata

Geometric Limited will showcase the latest version programming solution, CAMWorks 2014 along with customer success stories at SolidWorks World 2014 in San Diego, California from January 26-29, 2014. These success stories come from diverse industries such as medical, consumer and industrial production in the manufacturing arena. The success stories include: Millitnow.com, a division of NCAD Inc., a job shop out of Florida: The company uses ultra-high performance toolpath technology from CAMWorks to promise its customers a turn-around time of one - three days. NCAD Inc., is a unique company that provides comprehensive services, from concept to fully assembled product in one facility, without the need to outsource any aspect of the job. With the use of CAMWorks, NCAD has reduced their overall lead time by over 85% and reduced CNC programming time by more than 75%. .decimal Inc., makers of customer radiation therapy devices, have been able to turn-around life-saving devices within 24

Agilent Technologies Inc. today announced it will exhibit its high-speed digital solutions shown at DesignCon 2014, Jan. 29-30, Booth 201, in Santa Clara. The products offer a wide range of essential tools to help engineers design, simulate, analyze, debug and achieve compliant designs while meeting the challenges of gigabit digital designs. The company will also show its new Agilent EEsof EDA's Controlled Impedance Line Designer, J-BERT M8020A and TDR/TDT solutions to the public for the first time. "Agilent recognizes the unique value DesignCon brings to the many customers from the high-speed digital world," said Agilent's Doru Popescu, market segment manager. "We will showcase our latest products that provide design and test engineers with the best solutions to challenging digital problems. We'll continue to do that as we prepare to become Keysight Technologies and separate from Agilent later this year." Agilent will display and demonstrate high-speed/high-performance oscilloscopes, BERT solutions, logic analyzers, protocol analyzers, boundary scan analyzer, Agilent EEsof EDA software and RF & microwave network

Bridging the Requirements Gap with Model-Based Systems Engineering A CIMdata Systems Engineering and Simulation & Analysis Knowledge Council Workshop April 9, 2014 | Bad Homburg (Frankfurt), Germany   Who Should Attend? Why Attend? View Agenda Cost & Venue CIMdata’s Bridging the Requirements Gap with Model-Based Systems Engineering Workshop is a must-attend event for industrial organizations and solution providers involved with systems engineering or with simulation for product development. It provides independent education and a collaborative networking environment where ideas, trends, experiences, and relationships critical to these disciplines germinate and take root. The theme of this one-day workshop is Model-Driven Engineering and will focus on two critical areas: Model-Based Systems Engineering (MBSE): The evolving paradigm for systems engineering is that digital models augment requirements documents that are typically used to describe product functionality, performance, and other requirements. These models are shared across mechanical, electrical, software, controls, and other physics domains. Read New CIMdata Commentary on MBSE Linking Requirements to Product

Collaboration, Integration, and Sustainability: Keys to Maximizing the Value of PLM A CIMdata PLM Enterprise Value & Integration and Social Product Development & Collaboration Knowledge Council Workshop October 3, 2014 | The Inn at St. John's, Plymouth (Detroit), MI   Who Should Attend? Why Attend? View Agenda Cost & Venue Sponsored jointly by the PLM Enterprise Value & Integration (PEVI) and the Social Product Development & Collaboration (SPD&C) Knowledge Councils CIMdata’s Collaboration, Integration, and Sustainability: Keys to Maximizing the Value of PLM Workshop is a must-attend event for industrial organizations and solution providers involved with innovation, new product development, ensuring PLM and Social technology solutions meet business expectations, and product definition data flows smoothly throughout the extended enterprise. It provides independent education and a collaborative networking environment where ideas, trends, experiences, and relationships critical to these topics germinate and take root. This workshop will focus on three critical areas: ​Collaborative Innovation and Social Product Development: Innovation and new

PTC reported results for its first fiscal quarter ended December 28, 2013. Highlights Q1 Results: Revenue of $325 million, up 1% year over year on non-GAAP Q1’13 revenue and up 2% on a constant currency basis Non-GAAP EPS of $0.50, up 37% year over year and on a constant currency basis Non-GAAP operating margin of 25.3%, up 700 basis points year over year and on a constant currency basis GAAP operating margin of 16.9% and GAAP EPS of $0.33, including a $1 million restructuring charge related to actions announced in Q4’13 Q1 revenue contribution from acquired businesses Enigma (acquired on July 11, 2013) and NetIDEAS (acquired on September 5, 2013) was $2 million Q2 Guidance: Revenue of $320 to $330 million and non-GAAP EPS of $0.43 to $0.48 License revenue of $75 to $90 million GAAP EPS of $0.28 to $0.33 (excluding acquisition accounting for the ThingWorx transaction) Assumes $1.36 USD / EURO and 104 YEN / USD FY’14 Guidance: Revenue of $1,330 to $1,345

Bridging the Requirements Gap with Model-Based Systems Engineering   A CIMdata Systems Engineering and Simulation & Analysis Knowledge Council Workshop Wednesday, April 9th, 2014 Steigenberger Hotel Kaiser-Friedrich-Promenade 69-75 61348 Bad Homburg (Frankfurt) Germany Phone: +49 6172 181-0 Agenda Tuesday, April 8, 2014 19:00 – 21:00 | Welcome Reception & Networking at Steigenberger Hotel, Bad Homberg Please join us for drinks, appetizers, and networking the night before the Workshop. Morning Sessions - Wednesday April 9, 2014 08:00 – 08:45 | Registration and Networking Over Coffee 08:45 – 09:00 | Welcome and Introduction Gerard Litjens, Director of European Operations, CIMdata [Bio] Introduction to the Workshop and update on CIMdata and its direction, for 2014 and beyond. 09:00 – 09:30 | System of Systems: Way Beyond the Product Don Tolle, Director of Systems Engineering & Simulation Consulting Practices, CIMdata [Bio] The circular economy is well represented as a system of systems. Product concepts now consider perspectives well beyond the physical product’s definition (hardware, software, and electronics) to include many other factors, including production, logistics, installation, ongoing maintenance throughout

A CIMdata Simulation & Analysis Knowledge Council Workshop June 25, 2014 | GE Aviation Brian H. Rowe Learning Center - Cincinnati, Ohio   Who Should Attend? Why Attend? View Agenda Cost & Venue Are you involved in Simulation & Analysis at your company? If so, plan to join your peers to discuss all the key topics and more at our upcoming Simulation & Analysis Knowledge Council workshop. CIMdata’s annual North American Simulation & Analysis Workshop is a must-attend event for industrial organizations and solution and service providers involved with simulation for product development. It provides independent education and a collaborative networking environment where ideas, trends, experiences, and relationships critical to simulation and germinate and take root. Learn About: The critical role of simulation to support product development decisions How simulation can close the loop between product performance and system requirements Strategies to manage simulation as strategic capabilities to create a sustainable competitive advantage The cultural and organizational barriers to implementation and

hyperMILL®, the CAM solution from OPEN MIND Technologies AG, is fully compatible with Autodesk Inventor, as officially confirmed once more following certification by Autodesk Inc. for hyperMILL® and the latest release of Autodesk Inventor 2014. The seamless integration of hyperMILL®, including data associativity, allows continuous workflows all the way from design to CNC manufacturing. As with all previous releases, the hyperMILL® CAM software, with its wide range of machining strategies and optimisation features, was subject to thorough testing by Autodesk. This provides users with the peace of mind in knowing that the integration of the programs guarantees full interoperability. Furthermore, the OPEN MIND CAM solution can be accessed directly from within the Autodesk Inventor 2014 user interface and both systems share the same database. This means that CAM operations are automatically updated in hyperMILL® when changes are made to the CAD model. By having the two programs integrated, users are able

Numerix, provider of cross-asset analytics for derivatives valuations and risk management, and MathWorks, developer of MATLAB, a high-level language and interactive environment for numerical computation and visualization, today announced that Numerix CrossAsset Integration Layer is now integrated with the MATLAB environment. Through this integration, financial engineers, risk managers and analysts can now leverage Numerix calculations to create fully customized, robust financial applications for pricing, modeling, and analyzing complex financial instruments. MATLAB and Financial Instruments Toolbox™ leverage the Numerix CrossAsset library to access the industry’s most comprehensive collection of models and methods. Calendars, market conventions and fixing history are also provided via Numerix, enabling faster, more efficient model creation and analysis. The integration enables MATLAB users to price any conceivable derivatives instrument from within the MATLAB environment. “Users of the Numerix and MATLAB integration have a new level of access for financial analytics—namely pre-trade analysis, model validation and testing and model comparison—that spans research and production applications,”

ZWCAD Design officially announced the Extra-Plus Tool-Kit, available for ZWCAD+ Pro. Providing 18 new tools designed specifically for ZWCAD+ Pro and appropriate for all forms of design work, ZWCAD+ Pro can now help designers complete repetitive tasks more quickly, while efficiently organizing their design environment. 18 New Tools to Improve Efficiency “We work hard to continually update our products throughout their life cycle, and recent feedback has suggested our users want a more efficient way of designing,” says Daniel Huang, Product Manager of ZWCAD+. “We have therefore provided a free download for ZWCAD+ Pro users which will add an even greater depth of tools for designers to utilize and improve their design environment”  Organize Designs Efficiently With the new Block Attribute Delete function, users can delete multiple block reference attributes quickly and easily, while the Move Layer Object function allows users to quickly assign selected objects to a given layer. These functions improve