Computer Simulation Technology (CST) announces the addition of Filter Designer 2D to CST STUDIO SUITE®, allowing the synthesis, electromagnetic simulation, optimization and multiphysics analysis of filters in one single environment. Planar filters are widely used by engineers developing low-cost or compact printed electronics for applications such as networking, communication and signal processing. For these filters, the design process typically has two stages. The first step is selecting an appropriate filter topology from a synthesis tool or textbook and calculating the filter coefficients that match the specification. The second step is analyzing and fine-tuning the filter through simulation or prototyping to ensure that it operates correctly when installed. Built on Nuhertz Technologies’ well-reputed and mature technology, Filter Designer 2D’s integration into CST STUDIO SUITE means the full workflow can now be carried out with a single tool. Filter Designer 2D includes a database with a wide variety of filter types, including both lumped element

BETA CAE System S.A. announces the release of v15.1.2 of our ANSA & μETA pre- and post- processing suite. With new enhancements and fixes to identified problems, this version further enhances and improves the performance of our latest v15.1x branch. Amongst the new enhancements and fixes of v15.1.2 the most noticeable are listed below: Understanding the Software Release Schedule BETA CAE System is committed in delivering improved and enhanced software releases, the soonest possible, in order to meet the requirement of their customers for the continuous improvement of their experience and work. Therefore, they are working in releasing new software versions with code corrections, new software features and enhancements, in regular, frequent intervals. A major software version is released every year. First point releases, such as v14.1.0, v14.2.0 and so on, with code corrections but also with additional software features and enhancements are released every three months. Second point releases, such as v14.2.1, v14.2.2, v14.2.3 mainly

Today AVEVA announced that Tupras, Turkey’s largest Owner Operator in the oil & gas industry, is investing extensively in AVEVA software technology following an intensive evaluation process. AVEVA Everything3D (AVEVA E3D), together with AVEVA Diagrams, AVEVA Electrical and AVEVA’s laser scanning solutions will play a key role in  a major brownfield revamp programme. Tupras’ ambitious project aims to maximise production, increase safety and extend the life of its four refineries.  The AVEVA laser data software will be used to capture the existing assets and new, as-built design documents will be created with AVEVA E3D and a range of schematic products.  The Integrated Engineering & Design approach will help Tupras to meet revamp/modfication project schedules while dramatically improving quality. ‘We chose AVEVA for a number of reasons,’ explained M. Murat Kalkanli, Projects and Investments Director, Tupras. ‘The proof of concept demonstrations gave us confidence that the technology lived up to its reputation as

CDS (Catalog Data Solutions) announced that its Catalog as a Service™ and CAD as a Service™ solutions has been selected by Buckeye Fasteners. Buckeye Fasteners takes pride in stocking an impressive inventory of fasteners from at least eight leading fastener manufacturers. In addition to weld fasteners, they also distribute adjusting screws, nuts, press nuts, stand-offs, cap, acorn, thumb nuts, rivet nuts, grease fittings, clevis pins, appliance levelers and furniture glides. Buckeye has complete custom manufacturing capabilities and supports their products from development to implementation. Their on staff engineering department can assist you with product development and provide total technical support. “Today, the industrial buying process has changed. Most of us search online for what we need and industrial designers do the same – often before talking to a potential supplier. The first impression potential customers get of our company is often our website, so it needs to give them an excellent and

Anark Corporation today announced they will be presenting at the Automotive Industry Action Group (AIAG) Annual Product Development and Technology Forum along with two of their strategic customers GE and NAVAir. Craig Humanchuk, GE's Engineering CIO at GE Aviation, John Schmelzle, NAVAir's Model Based Definition Lead at the Naval Air Warfare Center, and Chris Garcia, EVP of MBE Business Development at Anark Corporation will share the stage to present the latest Production successes of their 3D Model Based Enterprise deployment initiatives. During their presentations the audience will learn about the powerful value propositions and use cases that the 3D MBE enables, unique cultural issues which must be addressed, and why open, template based 3D PDF and 3D HTML Platforms were chosen over proprietary CAD formats and lightweight viewing platforms offered by their respective PLM software vendors. Registration for this important October 1st, AIAG automotive technology sharing event is limited but may still be

CONTACT Software is now providing its offering for the early phase of product development and the rapid development and functional validation of model variants through an independent company. To do this, the company founded Fast Concept Modelling & Simulation GmbH, which is headquartered in Munich. The subsidiary is responsible for business activities in the field of product validation. The offering is centered around Fast Concept Modelling (FCM), an innovative, CATIA CAA-based software that allows a greater degree of automation when using numeric calculation methods. CONTACT's managing director Karl Heinz Zachries outlines the objectives of the new subsidiary: "This realignment will allow us to establish FCM in the market long-term by systematically driving forward the development and marketing of the product together with new partners." According to Zachries, the new, autonomous limited company will be able to concentrate on the extremely specialized domain of simulation and computation, operate with greater agility and provide

BIMobject® announced the BOPC™ technology at the BIMobject® LIVe conference in Malmö. The new cloud solution is aimed to address the growing demand of extended properties in objects also known as parameters, meta data or attributes. Many initiatives around the world are working with setting future standards for properties but they don't address the critical fact of how to get this to the market, to the users and how to integrate it into the BIM objects and BIM models in an easy way. BOPC™ is the first cloud solution that solves this problem. It is easy to use and practical way to add property sets from standardization organisations around the world. BOPC™ can also be used to solve the fact that manufacturers might want some additional properties in their objects, as well as advanced users like construction companies and developers can add hidden properties to objects to drive logistics and purchasing at

Bentley Systems, Incorporated, announced the availability of ProjectWise Essentials, a cloud-based, instant-on design integration environment for all projects. This “software at your service” provides immediate access to key advantages of ProjectWise, the world’s leading design collaboration and work sharing solution, while enabling user organizations to further benefit from a budget-friendly, predictable cost model. ProjectWise helps AEC project organizations avoid risk and stay competitive by enabling high performance project delivery. It provides information mobility with integrity, cross-functional work process management, and change management to increase information quality and visibility throughout the project lifecycle. Deployed in 101 countries, ProjectWise is the design integration and collaboration system of choice for all of the ENR Top 25 Design Firms, the majority of U.S. state departments of transportation, and 81 of the ENR Top 100 Design Firms, with over $120 billion in annual design billings. With ProjectWise, these firms report 14 percent higher professional utilization (than comparable firms without ProjectWise) and are assured that every hour of

Yunique Solutions® has announced that Zhejiang Semir Garment Co., Ltd.® (Semir) has selected YuniquePLM™ to enhance its process optimization flow, improve supply chain collaboration, and increase speed to market. Founded in 1996, Semir is a leading brand of casual adult and children’s clothing and has since grown to become one of China’s largest apparel brands. In 2014, Semir expanded beyond its well-known Semir casual clothing and Balabala® children’s clothing brands, adding Mongdodo® and Minibalabala® to their brand portfolio. The Chinese apparel sector is currently undergoing a structural shift moving from a primarily export-based model to a more domestic consumer facing industry. To meet this growth in domestic demand, Semir is making moves to strengthen its supply chain management by consolidating its previously diverse and disconnected systems into a single view. Previously, its scattered systems posed challenges to quality and delivery controls, hindering the company’s growth ambitions. To overcome this, Semir has worked

FISHER/UNITECH just announced SolidWorks executives will kick off the second annual Design Excellence Forum – a provocative event scheduled in 11 cities throughout the Midwest and Northeast. Ken Clayton, VP Worldwide Sales; Paul Adams, VP of Technical Sales; Paul Giaconia, VP of Corporate Accounts; Gary Krauter, Territory Sales Senior Manager; Kurtis Anliker, Director of Technical Sales; and Mark Martel, Area Technical Director will be the keynote speakers featured at some of these events. This year’s Design Excellence Forum will offer several seminars showing how to leverage today’s most innovative technologies to achieve excellence in design and manufacturing. The Forum promises to cover many stellar topics: 3D mechanical CAD enhancements; conceptual design with cloud-based collaboration; unified electronic design; improved simulation techniques; advanced 3D printing for product development; data management; and the latest for technical communication. This event also features a reveal of the new SolidWorks 2015 software. This roadshow will begin on