Neues

Rockwell Automation, Inc., the world’s largest company dedicated to industrial automation and digital transformation, unveiled an exciting lineup of new technologies debuting at Automation Fair® 2025, taking place November 17-20 in Chicago. Each year, thousands of industry professionals, customers and press attend to see firsthand what is new and what is next in automation. “Automation Fair is where we bring our biggest product and technology announcements to the world,” said Matheus Bulho, senior vice president, Software & Control, Rockwell Automation. “This year will showcase a bold range of innovations designed to transform how industries operate and to accelerate the pace of digital transformation.” Attendees will have the opportunity to explore newly launched hardware, software and services across immersive exhibits, hands-on labs and expert-led sessions. Rockwell leaders and partners will also share insights on how these innovations are creating the future of industrial operations. Here’s a sneak peek at what’s launching at Automation Fair 2025. Built

Dassault Systèmes reports its IFRS unaudited estimated financial results for the third quarter 2025 and nine months ended September 30, 2025. The Group’s Board of Directors approved these estimated results on October 22, 2025. This press release also includes financial information on a non-IFRS basis and reconciliations with IFRS figures in the Appendix. Summary Highlights1  (unaudited, IFRS and non-IFRS unless otherwise noted, all growth rates in constant currencies) 3Q25: Total revenue up 5% to €1.46 billion, with software revenue up 5%; 3Q25: Recurring revenue up 9%, driven by strong subscription revenue up 16%; 3Q25: 3DEXPERIENCE software revenue up 16%; 3Q25: Non-IFRS operating margin of 30.1%, up 100 basis points versus last year; 3Q25: Non-IFRS diluted EPS up 10% to €0.29; FY25: Adjusting full-year revenue growth outlook to 4-6% (previously 6-8%), while reaffirming non-IFRS diluted EPS target of 7-10% growth.  1IFRS figures for 3Q25: Total revenue of €1.46 billion, Operating margin of 20.7% and diluted EPS of €0.20; IFRS figures for

This webinar will launch the first global study on AI adoption across product development. ANN ARBOR, Michigan, USA 22 October 2025—CIMdata, Inc., the leading global research, consulting, and education firm specializing in Product Lifecycle Management (PLM) and the Digital Transformation it enables, announces an upcoming free webinar, “Benchmarking AI in PLM: Launching the First Global Study on AI Adoption across Product Development.” The webinar will take place on Thursday, 20 November 2025, at 11:00 a.m. (EST) and last for one hour. Despite the dominance of Artificial Intelligence (AI) in every industry conversation, companies are facing a critical gap: there is no neutral, fact-based data to help industrial organizations understand how AI is actually being applied in PLM. This lack of objective benchmarking makes it nearly impossible for leaders to confidently assess their standing, validate investment priorities, or build reliable, forward-looking strategies. In response, CIMdata is launching this first global study to benchmark AI

Constellation Software Inc. announced it intends to release its third quarter results on November 7, 2025. The Company’s quarterly results will be disseminated via press release and made available on the Company’s website (www.csisoftware.com) and the SEDAR website (www.sedarplus.ca), after markets close on Friday, November 7, 2025. As outlined in Constellation’s press release on February 23, 2018, Constellation has ceased holding conference calls to discuss the Company’s quarterly financial results. In lieu of the quarterly calls the Company has created a link on its website where shareholders can submit questions to management. Periodically the Company will publish responses to selected questions received. The Company believes this Q&A facility will eventually prove to be a more effective tool than the conference calls because it will be searchable and will provide an archive of all previous responses. The Company’s goal in establishing this policy is to allow all investors ongoing access to information disclosed about

JBT Marel Corporation announced that it will report third quarter 2025 financial results on Monday, November 3, 2025, after the market closes. JBT Marel will host an earnings conference call on Tuesday, November 4, 2025, at 10:00 AM ET / 15:00 GMT. The conference call will be webcast and is accessible through this link: Webcast Registration. The webcast will also be available for replay shortly after the conference call ends. This information is also available on the Company’s Investor Relations Website. To view the original press release, please click here. Search for JBT Marel on CIMdata.com

Mensch und Maschine Software SE, a CAD/CAM/BIM specialist company, achieved the second strongest 9M earnings in the company's history despite the retarding effects of the now completed transition to the new Autodesk model, while EBIT margin jumped from 14.1% to 21.0%.  Sales amounted to EUR 177.10 mln (PY: 270.08 / -34%), with EUR 85.99 mln (PY: 82.31 / +4.5%) from M+M Software and EUR 91.11 mln (PY: 187.77 / -51%) from Digitization, where after the switch from resale to commission, the majority of the Autodesk purchase has been eliminated. This leads to a technical reduction in sales, which was particularly strong in Q3 due to the final reselling boost in the previous year.  Group gross profit came in at EUR 135.70 mln (PY: 135.05 / -0.5%), with EUR 77.54 mln (PY: 74.99 / +3.4%) from M+M Software and EUR 58.16 mln (PY: 60.06 / -3.2%) from Digitization. The Autodesk transition resulted in

Simulations Plus, Inc. (“Simulations Plus” or the “Company”), a leading provider of cheminformatics, biosimulation, simulation-enabled performance and intelligence solutions, and medical communications to the biopharma industry, announced preliminary results for its fiscal year 2025 and issued preliminary guidance and management outlook for fiscal year 2026 as follows: Fiscal 2025 Preliminary Fiscal 2026 Guidance Revenue $79.1M $79M – $82M Revenue growth 13% 0 – 4% Software mix 58% 57 – 62% Adjusted EBITDA margin 28% 26 – 30% Adjusted diluted EPS $1.03 $1.03 – $1.10 The fiscal 2025 preliminary results and fiscal 2026 guidance set forth above are preliminary and unaudited based on currently available information and management estimates and are subject to adjustment in the final audited financial statements to be filed with the Company’s Annual Report on Form 10-K for the full fiscal year 2025, expected to be filed on December 1, 2025. “We expect to successfully meet our revised fiscal 2025 guidance despite operating in a challenging market environment shaped by ongoing uncertainty around funding, drug pricing,

Xometry, Inc., the global AI-powered marketplace connecting buyers and suppliers of custom manufacturing, announced it will report its third quarter 2025 financial results before the market opens on November 4, 2025. Xometry will host its conference call and webcast to discuss the results at 8:30 a.m. ET (5:30 a.m. PT) on the same day. In addition to its press release announcing its Q3 2025 financial results, Xometry will also release an earnings presentation, which will be available on its Investor Relations website. Xometry, Inc. Q3 2025 Earnings Presentation and Conference Call Tuesday, November 4, 2025 8:30 a.m. ET / 5:30 a.m. PT Investors and participants can register in advance here. You may also visit the Xometry Investor Relations website to listen to a live webcast of the call. The earnings presentation webcast will be archived within the Investor Relations section of Xometry’s website. To view the original press release, please click here. Search for Xometry on CIMdata.com

Chaos announces the release of Chaos Vantage 3, the first major update to its real-time visualization platform in more than two years. With Vantage, AEC professionals can now drop their designs directly into digital replicas of real-world locations, add realistic environmental effects, refine materials with true-to-life lighting and visualize every detail in real time without sacrificing speed or quality. Whether leveraging the new support for universal formats or using Vantage 3 as a powerful standalone creative platform, users can build their designs exactly how they want, faster and easier than ever before.  “Vantage has always been about giving artists and designers an immediate, photoreal view of their work, whether they’re creating buildings, products or entire worlds,” said Allan Poore, chief product officer, Chaos. “With Vantage 3, we’ve taken that even further for AEC users by introducing USD and MaterialX support, adding new tools to explore designs in a real-world context, refining materials and

IronCAD, a leading provider of innovative CAD software solutions, proudly announces the release of IronCAD 2026. Designed to empower CAD designers in Industrial Equipment Machinery and Metal/Steel Fabrication manufacturing, this release introduces powerful features to boost productivity, streamline workflows, and enhance design precision. Key Highlights of IronCAD 2026 Include: Multiple Application Window Support for Scene and Drawings (ICD and DRAFT)Work seamlessly across multiple monitors with dedicated 3D Scene and 2D Drawing windows, each featuring a tailored Ribbon Bar UI in the same single instance of IronCAD. Changes in the 3D Scene update instantly in the Drawing with a single click, enhancing multitasking, speeding up iterations, and improving the overall user experience. Smart Annotation Add-On LicenseIronCAD introduces a new add-on license for Smart Annotations, offering automated dimensioning with precise control. Users can define specific dimensioning locations on objects, supporting adjustments to models or components in patterns. These points enable exact precision in automated dimensioning,