新闻动态

Centric Software announces that German-based TOM TAILOR GROUP, one of the leading and fastest-growing fashion and lifestyle houses in Europe, has decided to adopt Centric Software's Product Lifecycle Management (PLM) solution to support international growth. TOM TAILOR GROUP, with a staff of around 7,000 people, is quickly expanding and operates approximately 1,450 own retail stores, 3,000 shop-in-shops and is represented in more than 35 countries. TOM TAILOR has experienced strong growth in the past few years. The TOM TAILOR Brand itself has gone from € 200+ million to more than € 900 million combined revenues in the last five years through organic growth and also the acquisition of Bonita. TOM TAILOR and Bonita offer casual wear, denim and other clothing for men, women and children. The acquisition of Bonita opened up new opportunities for the Group, reaching a new target group of so called best agers (40years+). Centric was selected to support

 Geometric Ltd announced its third quarter financial results for FY 2015-2016 Highlights for the quarter ended December 31, 2015 (Q3 FY16) Highest-ever EPS of Rs. 4.48 Consolidated Profit after Tax of INR 289.43 Mn as against INR 230.24 Mn in the last quarter, and INR 163.68 Mn in the corresponding quarter last year, a growth of 25.7% q-o-q and 76.8% y-o-y EBITDA margins for Geometric (excluding the joint venture) improved to 15% Added two new customers Signed new deals worth USD 15.16 Mn The Company declared operating revenues of INR 3,148.46 Mn for the quarter, compared to revenues of INR 3,083.52 Mn in Q2FY16 and INR 2,888.89 Mn in Q3FY15, a rise of 2.1% and 9% respectively. In USD terms, revenues rose 0.5% q-o-q and 2.3% y-o-y to USD 47.68 Mn. The Company’s consolidated EBITDA stood at INR 632.09 Mn as against INR 534.86 Mn in the previous quarter and INR 421.54 Mn in Q3FY15, a growth of

Under the theme of building the car of the future today, Cadence Design Systems, Inc. today announced it plans to demonstrate its latest solutions for advanced driver assistance systems (ADAS), infotainment, electronic control unit (ECU) design, automotive Ethernet, early software development, and verification and debugging of embedded systems at embedded world Conference 2016 in Nuremberg, Germany. To see demonstrations on how to improve features, performance, efficiency, reliability and safety of future cars, visit http://www.cadence.com/cadence/events/Pages/event.aspx?eventid=1036. WHEN February 23-25, 2016   WHERE embedded world Exhibition and Conference Hall 4/4-116 Exhibition Centre Nuremberg, Germany WHAT Functional safety (ISO 26262) and security verification Automotive Ethernet/ADAS Cadence® Tensilica® infotainment solutions ECU design Cadence Protium™ rapid prototyping platform Embedded system verification and debugging IC package and PCB design and analysis   Conference Agenda Tuesday, February 23 16.00-16.30: Session 11- Management Focus II: New Business Opportunities "It's the Software … Unless it's the Hardware!" Speaker: Juergen Jaeger, Cadence Register online at embedded-world.de/voucher with the Cadence code B319244 for your free admission ticket. To view the original press release, please click here. Search

FCMS, a subsidiary of Contact Software, and the CAE specialist Tecosim are sharing their expertise to develop a new process solution for the transport industry. It is hoped that this new collaboration will speed up the early design process, and thus make virtual vehicle development even faster. Contact Software specialises in product lifecycle management (PLM) software as well as product data management (PDM) and project management software. Ahead of the Product Innovation Congress in Munich next month, this new tie-up represents a further widening of the reach of PLM technology. Ever more vehicle models are being launched on the market in ever shorter design cycles. This demands the fastest possible validation of the vehicle designs with regard to customer requirements, functionality, reproducibility and compliance with statutory requirements during the early development phase. This is where the joint offering from Fast Concept Modelling & Simulation (FCMS) and Tecosim can help designers to reduce

Alain de Rouvray, ESI Group’s Chairman and CEO, comments: “This acquisition complements the recent integration of Picviz Labs (now ‘INENDI’) and its technology for big data mining. Combining INENDI’s data correlation detection with Mineset’s pattern recognition, and linking both to ESI Group’s Virtual Prototyping solutions, provides a new transformative process and source of value creation, particularly in the traditional Virtual Engineering domain. While the exponential growth of the Information and Communication Technologies (‘ICT’) finds an accelerated usage in all economic domains, it also generates massive amounts of data (‘big data’). This trend imposes a critical pressure on industrialists confronted with the need to link virtual simulation models to the real world data of the Internet of Things (‘IoT’). To innovate effectively and competitively, it has become mandatory to generate a multitude of virtual models and to compare them between themselves and versus real world information. Making immediate sense of the exponential flux

Key takeaways: PTC has invested hundreds of millions of dollars in IoT and this event showcased their progress in supporting real-world use cases The Thing Event highlighted the potential for companies in a range of industries to use big data/analytics powered by IoT and augmented reality to deliver innovative user experiences that bring product and lifecycle knowledge to the point of work where it is needed most Augmented reality allows people to use both physical and digital representations of their products, changing the way they can leverage all the information embedded in designs PTC is introducing several new strategic offerings to support IoT based applications including ThingBuilder to author IoT applications, VuMarks to identify products in the field, and ThingX to facilitate Web access to rich 3D augmented reality CIMdata attended PTC’s Thing Event held on 28 January 2016 in Boston, MA USA (www.ThingEvent.com). The event consisted of a live telecast followed by a question

Key takeaways: Global market leaders in multiple industries are rapidly expanding their strategic use of virtual prototyping and simulation starting early in the product development process to gain a competitive advantage via innovation, quality, and time to profit Product innovation platforms are emerging to meet the needs of next generation systems and product development in Industry 4.0- and the Internet of Things (IoT)-enabled environments ANSYS® is successfully integrating a spectrum of multi-physics analysis solutions across the domains of mechanical, electronics, and software engineering to enable systems-level conceptual design and optimization ANSYS 17.0 enhancements are focused on improving the productivity of global distributed engineering product teams of simulation, analysis, and design engineers Virtual prototyping and simulation tools have increasingly become an indispensable element of the engineering product development process. Simulation technologies in areas such as mechanical (e.g., structural analysis, thermal analysis, thermo-fluid, and computational fluid dynamics), electrical (power characteristics, electromagnetics analysis), and embedded software let engineers

CIMdata Publishes Review of ANSYS 17.0 Product Release ANN ARBOR, Michigan, 9 February 2016—CIMdata, Inc., the leading global PLM strategic consulting and research firm released a new product Commentary for the recent ANSYS 17.0 release. This product review presents CIMdata’s perspectives on the ANSYS product suite as a platform to enable simulation-driven product development and innovation. The latest release of the ANSYS software includes a number of new technology enhancements across all major areas of the product portfolio as well as significant performance enhancements to address the productivity and effectiveness of global engineering teams performing product functional performance simulation across a range of industrial segments and applications. The Commentary touches on major areas of new functionality as well as the ANSYS approach to building an integrated environment for engineers to develop complex cyber-physical systems with ever increasing software and electronics content as industry transitions into the Internet of Things (IoT). The review

 PDF Key takeaways: Global market leaders in multiple industries are rapidly expanding their strategic use of virtual prototyping and simulation starting early in the product development process to gain a competitive advantage via innovation, quality, and time to profit Product innovation platforms are emerging to meet the needs of next generation systems and product development in Industry 4.0- and the Internet of Things (IoT)-enabled environments ANSYS® is successfully integrating a spectrum of multi-physics analysis solutions across the domains of mechanical, electronics, and software engineering to enable systems-level conceptual design and optimization ANSYS 17.0 enhancements are focused on improving the productivity of global distributed engineering product teams of simulation, analysis, and design engineers Virtual prototyping and simulation tools have increasingly become an indispensable element of the engineering product development process. Simulation technologies in areas such as mechanical (e.g., structural analysis, thermal analysis, thermo-fluid, and computational fluid dynamics), electrical (power characteristics, electromagnetics analysis), and embedded software let engineers

 PDF Key takeaways: PTC has invested hundreds of millions of dollars in IoT and this event showcased their progress in supporting real-world use cases The Thing Event highlighted the potential for companies in a range of industries to use big data/analytics powered by IoT and augmented reality to deliver innovative user experiences that bring product and lifecycle knowledge to the point of work where it is needed most Augmented reality allows people to use both physical and digital representations of their products, changing the way they can leverage all the information embedded in designs PTC is introducing several new strategic offerings to support IoT based applications including ThingBuilder to author IoT applications, VuMarks to identify products in the field, and ThingX to facilitate Web access to rich 3D augmented reality CIMdata attended PTC’s Thing Event held on 28 January 2016 in Boston, MA USA (www.ThingEvent.com). The event consisted of a live telecast followed by a question