新闻动态

Presentation will show how General Motors is enabling true end-to-end modeling and simulation as a core part of its product innovation platform. Ann Arbor, Michigan, 15 October 2015—CIMdata, Inc., the leading global PLM strategic management consulting and research firm is pleased to announce that Dr. Ulrike Warnecke, Engineering Group Manager for Systems Development & CAx Support, GM Vehicle Engineering Europe (Adam Opel), will make a presentation at PLM Road Map™ for the Global Automotive Industry. This one-day event, focused on the global automotive industry, will take place on 24 November at the Sofitel Bayerpost, Munich, Germany. Systems engineering, simulation and analysis, and other disciplines responsible for ideation, product conceptualization and realization, production, and support are starting to realize that multi-disciplinary lifecycle optimization is a requirement. To accomplish this, many are turning to model-based engineering techniques and technologies to ensure that the impact of change is fully understood across all functional disciplines throughout the product’s

Trace One today announced that Walmart has renewed its agreement for Trace One PLM. “Private Brand is a key driver of our growth, Trace One has provided a system and solution for our needs,” said Jack Pestello, Senior Vice President Walmart Private Brands. “We are delighted and honored that Walmart has decided to extend its relationship with Trace One,” said Jerome Malavoy, CEO of Trace One. “It’s a testament to the scale of our platform and the benefits of our solution. We look forward to continued success with Walmart.” Trace One connects all supply chain network stakeholders to accelerate product innovation while creating supply chain transparency. Trace One powers the world’s largest network for private label development with more than 20,000 companies in 110 countries developing over $300B in annual products spend. The company has offices in Boston, Chicago, Paris, London, São Paulo, Lisbon, Madrid and Dusseldorf.

Cadence Design Systems, Inc.today announced that Phison Electronics Corporation has used the Cadence® Voltus™-Fi Custom Power Integrity Solution to achieve silicon-proven accuracy on electromigration and IR-drop (EMIR) checks for its most advanced flash controller chips. With the Voltus-Fi Custom Power Integrity Solution, Phison reduced its tapeout schedule by eight weeks, improving time to market by 40 percent while also increasing overall product reliability. The Voltus-Fi Custom Power Integrity Solution is a transistor-level EMIR tool that delivers foundry-certified SPICE-level accuracy in power signoff. For more information, please visit http://www.cadence.com/products/mfg/voltus-fi/. The Phison design team delivered three proven silicon designs in 12 months by coupling the Voltus-Fi Custom Power Integrity Solution with the Virtuoso® custom design platform, which includes Cadence Spectre® Circuit Simulator and Quantus™ QRC Extraction Solution. The powerful, easy-to-use Cadence tool suite provided the design team with circuit simulation and layout EMIR analysis, debugging and fixing to improve overall design productivity. "As we are moving

ZWSOFT today released a new product, ZWCAD Classic, to celebrate the 15th birthday of its flagship product ZWCAD and reward all the customers and users for their support in the past years. ZWCAD has been warmly embraced by the market, thus ZWSOFT can focus its full energy and resources on improving its product. Again this time, ZWCAD Classic comes out with high compatibility, ease-of-use and powerful functionality to improve both productivity and cost-effectiveness.  "A great CAD software company should not only know what designers currently need, but also what they are going to need. A great piece of CAD software should not only be highly compatible, but also meet different designers' needs," said Daniel, ZWCAD Product Manager.  Fifteen years ago, ZWSOFT launched its very first generation CAD product ZWCAD, In the following years it released several updated versions. The previous products may have flaws and limited features and available languages,  but ZWSOFT is a

Siemens’ NX™ Nastran® software is now available on Rescale, an on-demand, dynamically scalable cloud environment delivered through a Software as a Service (SaaS) model. The new joint solution, which integrates on-demand high-performance computing (HPC) hardware with the industry’s leading finite element analysis (FEA) software, will be delivered by Rescale, Inc., a leading cloud simulation platform provider. Engineers can now seamlessly customize compute capacity, based on individual simulation requirements, to perform virtual product simulations. Rescale’s web-based platform allows engineers to easily run numerous instances of NX Nastran, resulting in cost-effective large scale simulations that more thoroughly evaluate design options. This results in improved efficiency, product quality and faster time-to-market. Using the Rescale platform, NX Nastran users can run hundreds of simulations simultaneously, leveraging a pay-per-use operating expense model. This can be a more cost effective option for new customers to quickly gain the benefits of NX Nastran, a product of Siemens’ product lifecycle management

Mentor Graphics Corporation today announced the availability of the Mentor® Automotive Safety Certifiable Digital Instrument Cluster solution enabling safety-critical driver information to be displayed simultaneously with rich 3D graphics on a single instrument cluster display.  The software architecture is implemented on a multi-core and even on single-core System-on-Chip, and features very fast boot time. This new solution addresses a key problem for the automotive OEMs: How to migrate safety-critical driver information to full-featured, graphically-rich digital instrument clusters and comply with safety standards including ISO 26262, without pushing up hardware or safety certification costs. Automotive OEMs today design digital instrument clusters that include graphical information relating to essential warnings from the vehicle, such as icons notifying the driver of brake, engine or tire problems. The new solution, which is compatible with safety-certified Nucleus® RTOS and Mentor's automotive-qualified Linux solutions, allows safety-critical and non-critical information to be displayed simultaneously on the same display, while maintaining isolation of safety-related

AVEVA announced the release of new enhancements to its AVEVA Bocad product range for structural steel detailing software. AVEVA Bocad features a plate and bar nesting capability for more efficient planning and use of materials. An enhanced weld numbering and traceability feature provides efficient increased fabrication efficiency, design quality assurance and improved structural integrity maintenance. In addition elements of AVEVA Bocad can now be brought into AVEVA Marine production tools to fabricate detailed ship and offshore designs. ‘The latest release of AVEVA Bocad realises the true integration between steelwork design, detailing and fabrication,’ said Richard Brotherton, Vice President of Sales – Fabricator, AVEVA. ‘It transforms our customers’ project workflows from the design office through fabrication to construction by enabling more efficient and extensive collaborative working. AVEVA Bocad not only improves this by providing a more tightly integrated digital workflow in structural steel, it also forms part of AVEVA’s Integrated Engineering &

ActivePDF announced the release of a new PDF automation tool to batch conversions of CAD drawings, plans, and diagrams to PDF that addresses security requirements, regulations, and business mandates with 100% document fidelity. CADConverter eliminates the complexity requirement of specialized applications to view CAD designs. Converting to PDF eliminates the requirement of the original CAD authoring application or 3rd party viewers. This delivers the ease of distribution, collaboration, and format consistency of sharing CAD designs.     "Converting documents to PDF is often part of a workflow or records management processes to ensure document controls," said Jay Schlarb, Chief Operating Officer. “ActivePDF mitigates the risks for organizations to ensure compliance, archiving and collaboration demands are met through improved document management by converting CAD designs to PDF.” CADConverter is integrated on the solid platform of ActivePDF DocConverter validates a sense of security to new prospects and clients. DocConverter is used by thousands of companies to convert

Aras® today announced that BAE Systems Sweden, a subsidiary of BAE Systems Plc. and a leading manufacturer of weapons systems and military vehicles, has selected Aras Innovator® as the new common PLM platform to establish a single, unified PLM backbone across the enterprise for systems development. BAE Systems Sweden has selected Aras gold certified partner Minerva, based on technical expertise and experience, to conduct the Aras implementation and data migration from the two legacy PDM systems, using a multi-phase approach. Phase one will include Aras solutions for configuration management, Bill of Materials (BOM) and document/CAD management, enterprise reporting and searching, and secure social, as well as integrations to multiple MCAD and ECAD systems, SAP and IFS ERP, and Eurosteps Share-A-space data repository. “With Aras, we will be able enhance the business efficiency, reduce cost and get a modern future proof technology in place,” said Kalle Hagström Head of Information Systems at BAE

ESI Group announces the third OpenFOAM User Conference. Scheduled in Stuttgart on October 19-21, 2015, the event will bring together the global OpenFOAM community to hear about the latest OpenFOAM developments and to share best practices. ESI, who acquired OpenCFD Ltd. in 2012, continues to enhance the world's most popular open-source CFD code to enable efficient product development, at an industrial scale. In addition to providing information on software updates, elaborated by the ESI-OpenCFD team, the Conference features many customer presentations, including from longtime ESI customer Volkswagen, and a third day dedicated to hands-on training. OpenFOAM is a free, open source CFD software package developed by ESI-OpenCFD and other participants in the global OpenFOAM community. It has a large user base in both commercial and academic organizations and addresses needs in most areas of engineering and science. OpenFOAM has an extensive range of features that address anything from complex fluid flows involving chemical reactions, turbulence and