评论

OceanMight Sdn. Bhd., an associate company of KKB Engineering Berhad, has embarked on a project to integrate its construction/fabrication yard management, activities and project execution; and has selected Intergraph Smart™ Yard as the solution to provide and implement the project architecture after an extensive evaluation exercise. Located in Sarawak, Malaysia, OceanMight is a PETRONAS-licensed fabrication yard for offshore facilities construction (major onshore fabrication) for the oil and gas industry. OceanMight offers full project engineering services including engineering, procurement, construction, installation and commissioning (EPCIC) from its purpose-built yard, including pipe spools and structural steelworks production. OceanMight will implement the pre-configured Smart Yard solution across the entire life cycle of the integration project, including engineering, document management, material management, construction management, quality management, shop floor management, and testing and commissioning. Smart Yard includes workflows based on industry best practices that manage the EPCIC project lifecycle, and specifically addresses yards’ key work processes, which will allow

Open Text™ Corporation today announced that financial results for its first quarter fiscal year 2015 will be released on Wednesday, October 22, 2014 at approximately 4:00 p.m. ET. Teleconference Call Mark J. Barrenechea, OpenText CEO and John Doolittle, OpenText CFO will host a conference call on October 22, 2014 at 5:00 p.m. ET to discuss the company's financial results. Date: Wednesday, October 22, 2014 Time: 5:00 p.m. ET/2:00 p.m. PT Length: 60 minutes Where: 1-800-319-4610 (toll-free) +1-604-638-5340 (international) Investors should dial in approximately 10 minutes before the teleconference is scheduled to begin. A replay of the call will be available beginning October 22, 2014 at 7:00 p.m. ET through 11:59 p.m. on November 5, 2014 and can be accessed by dialing 1-800-319-6413 (toll-free) or +1-604-638-9010 (international) and using passcode 1469 followed by the number sign. For more information or to listen to the call via web cast, please use the following link: http://investors.opentext.com/events.cfm. 

Q2 revenues at $ 2,201 million. Growth of 3.1% QoQ; 6.5% YoY Q2 constant currency revenue at $ 2,217 million. Growth of 3.9% QoQ; 6.3% YoY Q2 net profit at $ 511 million. Growth of 6.0% QoQ; 33.4% YoY FY 15 revenue guidance maintained at 7%-9% Interim dividend of `30 per share (app. $ 0.49 per ADS) 1:1 bonus issue of equity shares and 1:1 stock dividend of American Depositary Shares, to increase liquidity of its shares and expand the retail shareholder base Financial Highlights Consolidated results under International Financial Reporting Standards (IFRS) for the quarter ended September 30, 2014 Quarter ended September 30, 2014 Revenues were $ 2,201 million for the quarter ended September 30, 2014 QoQ growth was 3.1% in reported terms; 3.9% in constant currency terms YoY growth was 6.5% Net profit was $ 511 million for the quarter ended September 30, 2014 QoQ growth was 6.0% YoY growth was 33.4% Earnings per share (EPS) was $ 0.89 for the quarter ended September 30,

The engineering and technology group SENER has opened an Engineering and Construction division in Manchester to reinforce its presence in the United Kingdom. The group already has work sites set up in the UK and it maintains a close 25-year relationship with Rolls Royce through ITP, a leader in the global market for industrial and aeronautical engines in which SENER (53.125%) and Rolls Royce (46.875%) are the two shareholders. The new office will lend the support needed for ongoing projects such as the construction of two Queen Elizabeth-class aircraft carriers for the Royal Navy. The units benefit from the engineering and data creation technology of the FORAN System, SENER’s CAD/CAM/CAE software for the design and construction of ships and offshore units. The FORAN System – which celebrates its golden anniversary in 2015 – is also being used in two additional projects for the Royal Navy: the Successor series of new nuclear submarines; and the new Type 26

SoftInWay Inc, officially announced today the opening of a permanent office in New York City, New York. This is the company’s second US office, with headquarters in Burlington, Massachusetts, and fifth global office, with facilities in Switzerland, India, and Ukraine. The office is located at 149 Madison Avenue near 32nd Street. SoftInWay moved into its new location at the end of the summer. For SoftInWay, 2014 was a very big year, with release of several new products including AxSTREAM 3.3, AxCYCLE for power plant cycle design, analysis and optimization as well as the new SoftInWay Turbomachinery University, which offers self-study classes and certification for Turbomachinery professionals worldwide. This growth, coupled with an increased scope of turbomachinery design, analysis and optimization services, has led the company to make the strategic decision to reorganize all US based sales and marketing people into one office as well as add significant headcount. The new NYC office

CGS announces several community involvement efforts throughout its global offices in 2014, including charitable campaigns and volunteer initiatives. CGS offices, including in Romania, Chile, India, Canada and the United States, participated in several company-wide and divisional community initiatives such as on-site volunteerism, employee-led fundraisers and corporate donations benefiting organizations of significance to employees, including:  The Gantz Foundation, a Chilean organization that specializes in a multidisciplinary approach to aid children born with cleft lip and palate Children’s organizations in Romania, including distress centers which aim to protect children in danger due to domestic issues The Edison Township Domestic Violence Response Team in Edison, New Jersey, which provides education, guidance and supervision to victims of domestic violence St. Aloysius School in Central Harlem, New York Additionally, in support of the ALS Association, CGS garnered worldwide participation amongst its global offices in the ALS Ice Bucket Challenge through the participation of over 250 employees and corporate and employee donation. Community initiatives have

Intergraph has announced the release of CADWorx 2015, the software solution for plant design and automation that now adds capabilities to CADWorx Design Review that allow the generation of *.iFV files for viewing, sharing and reviewing CADWorx design models on the Apple® iPad® using the free Intergraph® FreeView® app. Other CADWorx 2015 enhancements include capabilities for routing of mitered elbows, skewed pipe design, and male and female needle valves; custom field default values for models; new tables in the specification editor; and a new more user-friendly ISOGEN interface. Intergraph CADWorx, an AutoCAD-based intelligent 2D and 3D plant design system, provides ease of use, flexibility, scalability and interconnectivity. The software offers process and instrumentation diagram (P&ID) synchronization with the model plus intelligent modeling and automatic production of design deliverables such as isometric drawings and bills of material, enhancing organizational productivity throughout the engineering and design process. "Even though CADWorx is an AutoCAD-based plant

Informative Graphics Corporation (IGC®), announces Brava!® Enterprise 7.2 for SharePoint. The new release offers these features and enhancements: Doc Merge allows users to drag and drop pages from multiple files to create a new file -- all while leaving original source files intact. Checkview enables guided review of forms, focusing a reviewer's attention on items that need to be reviewed or acted upon. The new Brava 3D ActiveX client displays 3D models, allowing users to measure, locate and identify parts; access part and subassembly info; view multi-plane cutaways and cross sections and explode assemblies. Enhanced text comparison shows differences between two documents more distinctly. Highlight colors, fonts and text wrapping can all be customized to suit individual preferences.  Electronic signatures, initials or professional seals can be applied easily to validate documents or show that they have been reviewed. The cross-platform Brava HTML5 client now offers faster page loading and vector viewing for crisp views at tight zoom

Flow Science has announced the release of FLOW-3D/MP v6, the high-performance computing version of its flagship CFD software, FLOW-3D. FLOW-3D/MP v6 is fully synced with the latest developments in FLOW-3D version 11, including the addition of Flow Science’s state-of-the-art postprocessor, FlowSight™. Performance improvements, both an increased speed up of simulations and a decreased use of memory, have been achieved using automatic domain decomposition, dynamic thread balancing, improved memory management, optimized MPI communication and hybrid MPI-OpenMP technology. For especially large simulations, a decrease of 20-24% in memory usage and speed-up of 30-40% has been shown in a typical metal casting simulation from the previous version of FLOW-3D/MP. “Flow Science has long recognized the competitive advantage HPC-enabled tools such as FLOW-3D/MP provides to our customers. FLOW-3D/MP gives our users the ability to study more design alternatives in a shorter amount of time than ever before, pushing product performance to new heights,” said John Ditter, VP

BETA CAE System S.A. announces the release of v1.0.4 of Simulation, Process, Data & Resources Manager (SPDRM) software. This release focuses on the correction of identified problems and issues with the previous releases. The most noticeable fixes are listed below. Addressing the problem of contemporary CAE community to integrate data, processes and resources, BETA CAE Systems S.A. brings forth a new solution for driving high quality and effective virtual product development procedures. This new software tool, the Simulation Process, Data & Resources Manager (SPDRM), provides a simple and intuitive way to capture, deploy, and manage CAE process workflows by integrating the resources, the tools, and the data associated with these.  Reflecting a deep understanding of the demands of simulation and its role in the enterprise, it couples with the enterprise PDM system and integrates CAE into higher level business processes by delivering CAE tasks and associated data to analysts, engineers, designers, suppliers, and managers. The architecture