评论

Fujitsu has reported consolidated net income of 48.6 billion yen (US$472 million), representing an improvement of 128.5 billion yen from fiscal 2012. Consolidated net sales for fiscal 2013 were 4,762.4 billion yen (US$46,237 million), up 8.7% from fiscal 2012. Sales in Japan rose by 2.7%. Sales of system integration services increased, primarily to the public sector and financial services sector, and there were also higher sales of network products and PCs. Outside of Japan, sales rose by 20.2%, up by 1% on a constant-currency basis. Gross profit was 1,269.1 billion yen, up 65.4 billion yen from fiscal 2012. Despite the decline in mobile phone sales, gross profit increased due to the impact of foreign exchange fluctuations and the beneficial effects of initiatives to improve profitability. Selling, general and administrative expenses were 1,126.6 billion yen, an increase of 11.1 billion yen from fiscal 2012, mainly attributable to the weaker yen. As a result, Fujitsu

Cimatron Limited announced today that it will be releasing its first quarter financial results on Wednesday, May 14th, 2014, before the US markets open. Cimatron's management will host a conference call that same day, at 9:00am EDT, 16:00 Israel time. On the call, management will review and discuss the results, and will also be available to answer questions by investors. To participate, please call one of the following teleconferencing numbers. Please begin placing your call at least 5 minutes before the conference call commences. USA: +1-888-407-2553 International: +972-3-9180610 Israel: 03-9180610 For those unable to listen to the live call, a recording of the call will be available from the day after the call under the investor relations section of Cimatron's website, at: http://www.cimatron.com.  

Autodesk, Inc. today announced that it will broadcast its first quarter fiscal 2015 financial results conference call live via its website Wednesday, May 15, 2014 at 2:00 p.m. Pacific Time. Autodesk will host a live webcast call at www.autodesk.com/investors. An audio replay webcast and podcast will also be available after 5:00 p.m. Pacific Time on our website at www.autodesk.com/investors. For more information, please call Autodesk Investor Relations at 415-507-6705. 

ANSYS, Inc., today announced growth in both revenue and diluted earnings per share for the first quarter of 2014. Total GAAP and non-GAAP revenue each increased 9% over the first quarter of 2013. GAAP net income and diluted earnings per share each increased 11% over the first quarter of 2013, while non-GAAP net income and diluted earnings per share increased by 6% and 7%, respectively. "There are two major themes to the start of our fiscal year. First and foremost, the solid performance of our organic business, and the second being another milestone in our long history of adding strategic acquisitions. The major business metrics for the quarter finished in the upper half of our outlook, highlighted by continued strong margins and earnings, a deferred revenue and backlog balance of $437 million, and record cash flows from operations of $132 million," commented Jim Cashman, ANSYS President and Chief Executive Officer. "During the quarter,

Occupying the largest booth at Texprocess/Techtextil 2014, Gerber Technology will demonstrate its ability to track work in process from order entry through the cutting room to help customers minimize human error and uphold brand quality. Integration occurs between the company’s AccuMark® 9.0 pattern design and marking software, GERBERspeader™ XLs and Paragon® cutting system. Steve Park, vice president and general manager of Gerber’s sewn goods business unit said, “Through its participation in Texprocess/Techtextil 2014, Gerber is proud to support the sewn products and technical textiles sectors in its home market. We constantly strive to offer our customers automation solutions that accelerate throughput, uphold product quality and maximize profitability and our newly integrated suite of software and hardware products accomplishes this in a meaningful way.” Gerber’s integrated products communicate cut plan details via a standard barcode. Users create and edit cut plans in AccuMark 9.0. Details of the cut plan, including number of plies, spread length and mode, are passed to

Informative Graphics Corporation (IGC™), an Alfresco Technology Partner and leader in viewing, collaboration and redaction technology, announces a reseller partnership agreement with Formtek®, an Alfresco Gold Partner that provides system integration, consulting, implementation and content management solutions. Formtek will offer the universal viewer IGC Brava!® Enterprise for Alfresco to its customers and prospects, as well as offer a version of Brava for use with the Formtek Engineering Data Management (EDM) Solution for Alfresco. “We’re delighted to offer IGC Brava to our customers,” said Formtek’s President and COO, Dennis M. Scanlon. “Our partnership with IGC allows us to extend our content management solutions to include drawing collaboration and control capabilities like markup and redaction.” With IGC Brava!® Enterprise for Alfresco,  users across the enterprise can view, annotate and redact content in virtually any file format, including Microsoft Office documents, PDFs, CAD drawings, images and more—all from a single, easy-to-use interface. Both the Brava software product and

ANSYS announced today that it has acquired SpaceClaim Corporation, a provider of fast and intuitive 3-D modeling software for engineers, for a purchase price of $85 million in cash, plus retention and an adjustment for working capital. The transaction was closed on April 30, 2014. On a non-GAAP basis, the transaction is expected to be neutral to slightly accretive to ANSYS' non-GAAP earnings per share in 2014, and accretive in 2015 and beyond.  Concord, Massachusetts-based SpaceClaim offers the first powerful and easy-to-use 3-D modeling tool that can be utilized by any engineer during the product development process. This process, called "direct modeling," differs dramatically from traditional CAD software, which is used by a relatively small percentage of engineers – typically late in the development process, to document the detailed design. SpaceClaim and ANSYS have partnered in the past to offer customers ANSYS®SpaceClaim Direct Modeler. ANSYS' longtime vision is "Simulation Driven Product Development"™, in which

ZWCAD Design today announced the release of a brand new update for ZWCAD Touch on Android. Version 1.2 brings 3D view to Android, as well as image insertion, newly compatible 3rd party cloud storage services, as well as improved search functionality. Fully Functioning 3D View ZWCAD Touch for Android is finally catching up to its iOS cousin, updated with the highly anticipated 3D View and 3D View Control features. Users can now open .DWG files containing 3D solids, and switch among different visual styles, such as 2D and 3D wireframe. Greater control is also offered to users, allowing them to orbit, pan and zoom, enabling the thorough inspection of drawings and designs. Insert Images to your Designs Another sought-after feature from ZWCAD Touch iOS has now arrived on Android. Version 1.2 allows users to place photos in to designs. This feature has been used previously to add images of on-site issues to the design,

The product design and development process will become faster, easier, more accurate, and more productive for consumer goods companies with the addition of two innovative mobile apps to Centric Software's portfolio of patent-pending mobile apps. Switchboard Mobile App and Material Sample Mobile App are the latest mobile apps for the Centric 8 product lifecycle management (PLM) solution. Product introduction, driven by tremendous product variety and a relentless need for speed to market, is revenue-critical for consumer products companies, says Chris Groves, president and CEO of Centric. “With these new mobile apps, a designer who has a moment of inspiration while sitting at a coffee shop, traveling on a train, or attending a textiles show can capture that inspiration immediately, bring it to fruition faster, and spur the product introduction process,” says Groves. The apps offer easy-to-use ways to bring the benefits of the mobile enterprise to the design and development processes of

BETA CAE Systems S.A. announces the release of the maintenance version 15.0.2 of ANSA & µETA pre- and post- processing suite. Several problems with the previous version have been fixed while performance has been also optimized. The most noticeable issues resolved are listed below. Understanding the Software Release Schedule The plan BETA CAE Systems is committed in delivering improved and enhanced software releases, the soonest possible, in order to meet the requirement of their customers for the continuous improvement of their experience and work. Therefore, they are working in releasing new software versions with code corrections, new software features and enhancements, in regular, frequent intervals. A major software version is released every year. First point releases, such as v14.1.0, v14.2.0 and so on, with code corrections but also with additional software features and enhancements are released every three months. Second point releases, such as v14.2.1, v14.2.2, v14.2.3 mainly with code corrections only upon their parent first point