Neues

Agilent Technologies Inc. will release second-quarter fiscal 2014 financial results after the stock market closes on May 14. The company will host a live webcast of its investor conference call in listen-only mode. Date: Wednesday, May 14 Time: 1:30 p.m. PDT Web access: www.investor.agilent.com Listeners may log on and select "Q2 2014 Agilent Technologies Inc. Earnings Conference Call" in the "News & Events - Calendar of Events" section. The webcast will remain on the company site for 90 days. In addition, a telephone replay of the conference call will be available at approximately 4:30 p.m. PDT on May 14 through May 21 by dialing +1 855 859 2056 (or +1 404 537 3406 from outside the United States) and entering pass code 20495852.

Delcam will demonstrate the 2014 versions of its PartMaker CAM system for Swiss-type lathes, turn-mill equipment and bar-fed mills, and the PartMaker Modeling CAD-for-CAM software at the SIAMS exhibition to be held in Moutier, Switzerland, from 6th to 9th May. PartMaker 2014 marks the introduction of Delcam’s Vortex high-efficiency strategy for area clearance into the PartMaker CAM suite.  Other enhancements in the 2014 version include improved back-turning and 2D pocketing functionality, support for additional tool types and faster programming of lead-in and lead-out moves, and a new NC program viewer among other improvements. Vortex is Delcam’s newest proprietary high-speed roughing technology.  Vortex controls the maximum engagement angle of the cutter in the material, such that the angle calculated for the programmed stepover is never exceeded, even in internal corners.  This allows for optimal cutting conditions to be maintained throughout the toolpath.  By controlling the maximum engagement angle and the load on the tool,

CVISION Technologies Inc. is pleased to announce its participation in EMC World 2013 in Las Vegas, Nevada. The 2014 EMC World Conference will take place from May 5th to May 8th at the Venetian. CVISION will exhibit at booth #920 in the Momentum Zone. Beth Fidellow, Director of Major Accounts at CVISION, says “We are excited to be exhibiting at the EMC World Conference in Las Vegas again this year. Our PdfOptimizer solution for Captiva resonates well with the many EMC users that have already experienced the reduced storage and bandwidth costs associated with having more efficient files. This year, we have expanded our product offering with EMC to include an interface into EMC Documentum. Now Documentum and Captiva users can benefit by replacing their stored images with much smaller, optimized PDF files.“ CVISION will showcase its solutions for EMC Captiva and EMC Documentum, PdfOptimizer and ImageOptimization. PdfOptimizer for EMC Captiva is

BOXX Technologies, innovator of high-performance computer workstations and rendering systems, today announced that its multi-GPU 3DBOXX 8950 workstation, featuring five NVIDIA professional graphics cards, will power Dassault Systèmes CATIA demonstrations in BOXX booth #206 at the COE 2014 Annual PLM Conference & TechniFair, April 27-28, in Anaheim, Calif. For over thirty years, COE (formerly the CATIA Operators Exchange) has been the only international, professional organization uniting Dassault Systèmes users and assisting them with Product Lifecycle Management (PLM) through education, training, networking opportunities, and more. BOXX also announced that their flagship workstation, the 3DBOXX 4150 XTREME will be on hand for CATIA demos while six additional 4150XT systems will be employed in the COE certification lab. "BOXX provides customers with the optimal solutions for their specific workflow," said Shoaib Mohammad, BOXX VP of Marketing and Business Development. "Our integration of dual Intel® Xeon® processors provides CATIA users with the performance they need, while our multiple GPUs add

Datakit has taken a new step towards the conquest of the Chinese and Russian markets, following the recent signing of agreements with local resellers. The past few months, Datakit has focused on Russian and Chinese markets, especially by going at Open Innovations Exhibition to present its products to the Russian industry, by joining the French High Technology Federation (FHTF), whose goal is to promote French know-how regarding High-Technology to international markets, and through its CEO, Francis CADIN, who is currently doing a world tour to meet many foreign partners, and will pass through Russia and China. These actions have been successful: Two companies have heard about Datakit products and are now interested in reselling it in their country. One of these companies, Itorum, is Russian, the other, Batlsoft, is Chinese. These are the very first Datakit resellers in these countries. These two new partnerships will allow Chinese and Russian industrial to obtain CAD converters from local companies, which will better guide

D3 TECHNOLOGIES, one of the providers of Autodesk Manufacturing Solutions, is privileged to announce that they have been chosen as one of six Master Resellers of Autodesk CAM Solutions. With D3's recent establishment of their Prototyping Division through the acquisition of a local machine shop and addition of CNC machining capabilities, D3 is more than equipped to support their clients. Many times, their customers need physical prototypes during the validation stage of the design process. Not only will D3 be able to provide their customers with physical prototypes, but they will be using Autodesk's integrated CAM Solutions to create all the G-Code to make it happen. The integration of Autodesk CAM Solutions directly within the design tools now gives machinists, engineers, and designers the ability to adapt to real-time changes and instantly update tool paths. "Team D3 is honored and excited to be designated as a Master Reseller for Autodesk CAM

AVEVA has made a major increase in its technology development resources in India by opening its second R&D centre in Hyderabad. A key component of AVEVA’s product development strategy, the new centre employs a significant number of new technologists, with plans to add more in the future. The office was formally opened by AVEVA Group Chief Technology Officer, Dave Wheeldon, and Senior Vice President & Country Head, India, Navtej Garewal. 'Our global research & development teams are crucial to maintaining AVEVA’s leadership in technology innovation. With India being one of our most important and fastest growing markets, it makes perfect sense to increase our investment here in both product development and customer support resources,' said Dave Wheeldon, CTO, AVEVA Group. 'Opening a second R&D centre in Hyderabad is a key element in our product strategy. We expect both Hyderabad offices to play increasingly important roles as major development centres for AVEVA.

Apply Now Location: Flexible CIMdata’s Project Managers are assigned to manage the delivery of a specific project. They are responsible for the overall management of a project in conjunction with client project leads. Primary Responsibilities Day-to-day interaction with clients Manages and coordinates project resources and schedules Works with client and Account Manager to define and incorporate scope changes into the statement of work Coordinates and submits all project deliverables on time and budget Ensuring that the client’s expectations are set and met or exceeded Identifies additional services to be provided and communicate these to the appropriate Account Manager Communicates and collaborates with the Account Manager to ensure the delivery of CIMdata support to the client   Job Requirements Bachelor's degree or equivalent industry experience Travel 50 to 80% Professional Experience 10+ years total experience Knowledge of PLM industry Proven project management skills Key Competencies Ability to analyze complex problems Aptitude for critical thinking Excellent communication and presentation skills Ability to work independently Strong problem solving and troubleshooting skills Ability to manage complex client relationships Ability to work

Apply Now Location: Flexible CIMdata’s Senior Consultants are assigned to a specific project and are responsible for the day-to-day interaction with the client once the project commences Primary Responsibilities Day-to-day interaction with the clients Support the development of project deliverables Identify additional services that would be of benefit to the client   Job Requirements Bachelor's degree required. Advanced degree preferred. Travel 30 to 50% Professional Experience 12+ years total experience 3-5 years experience with a consulting firm Knowledge of PLM industry Proven project management skills Key Competencies Ability to analyze complex problems Aptitude for critical thinking Ability to travel Excellent communication and presentation skills Ability to manage complex client relationships Ability to work in an highly collaborative and distributed organization  

Apply Now Location: Flexible CIMdata’s Lead Consultants for Solution Providers are the consultants assigned to CIMdata’s PLM Solution Provider accounts. They take care of day-to-date client service responsibilities. Primary Responsibilities Identifies services to be provided and communicates these to the Account Manager Works with the Account Manager to support the development of account specific strategies and plans Reviews client needs with the Account Manager to ensure they can be supported Assists in drafting client proposals and cost models Reviews and approves client proposals and cost models to ensure appropriateness for the client Technical contact for the client Communicates and collaborates with the Account Manager to ensure the appropriate delivery of client support   Job Requirements Bachelor's degree and 10+ years consulting and/or industry experience; Or advanced degree with 5+ years relevant work experience. Travel 20 to 30% Professional Experience 10+ years total experience 5+ years experience with a consulting firm Knowledge of PLM industry Proven project management skills on PLM projects Key Competencies Ability to analyze complex problems Aptitude for critical thinking Excellent