Neues

Presentation will discuss the role of PLM and information technology as a critical transformational element. Ann Arbor, Michigan, 29 August 2013 — CIMdata, Inc., the leading global PLM strategic management consulting and research firm announces that Adrian Micu, Vice President of Engineering for CES Group, North America’s largest manufacturer of industrial and commercial heating, ventilating, and air conditioning systems will make a keynote presentation at PLM Road Map™ 2013. The event, which is celebrating its 20th year, will be held in conjunction with Product Innovation Chicago on October 9 and 10. The presentation entitled “PLM as a key Transformational tool in Engineering Excellence,” will draw on the speakers’ prior experience as the Vice President of Engineering at Whirlpool Corporation. The presentation will consider which framework is right for achieving excellence in engineering and technology and will present the key factors for success. Additionally, the role of PLM and information technology as

 PDF Key takeaways: Companies are focusing on services to differentiate their product offerings and as a way to improve product design, improve profits, and increase customer satisfaction Effective Service Lifecycle Management (SLM) is a key factor in developing and maintaining customer satisfaction and loyalty PTC has developed and acquired a number of best in class service solutions that address key aspects of SLM and that enable a System for Service which helps companies provide world class service so their customers achieve the highest value from the products they sell Introduction Service is much more than the repair or replacement of defective or failing products. It encompasses all activities that ensure products can be used to their full potential—i.e., that the product performs as designed or better throughout its designed life. This critical activity involves a myriad of activities such as field service, warranty and contract management, customer experience, knowledge and technical information management, service logistics, and

30 years of defining, researching, and leading the PLM ecosystem Ann Arbor, Michigan, 27 August 2013 — CIMdata, Inc., the leading global PLM strategic management consulting and research firm is excited to announce a milestone 30th year anniversary. Founded in 1983 by Julius Dorfman, Robert Johnson, and David Penning, CIMdata has been at the forefront of the ever-evolving PLM ecosystem from the beginning. Throughout its 30 year history, CIMdata has been dedicated to maximizing its clients’ ability to design and deliver innovative products and services through the application of PLM. CIMdata is committed to advancing the PLM industry through its research, consulting, and educational endeavors. Commenting on this milestone event, CIMdata president Peter Bilello said, “CIMdata has shown that we have the ability to stay ahead of the PLM curve by providing timely and actionable insight and advice to our clients throughout the world. We owe our success to our people, who continue

Presentation will discuss the five distinct efforts that make up DARPA’s Adaptive Vehicle Make Portfolio. Ann Arbor, Michigan, 28 August 2013 — CIMdata, Inc., the leading global PLM strategic management consulting and research firm announces that LTC Nathan Wiedenman, a Program Manager at the Defense Advanced Research Projects Agency (DARPA) will make a keynote presentation at PLM Road Map™ 2013. The event, which is celebrating its 20th year in 2013, will be held in conjunction with Product Innovation Chicago on October 9 and 10. Current approaches to the development of defense systems and vehicles have proven inadequate for the timely delivery of new defense systems to the war fighter. To address this problem, DARPA’s Adaptive Vehicle Make (AVM) portfolio seeks to fundamentally alter the way systems are designed, verified, and built. The primary goals of AVM are to: raise the level of abstraction in the design process; minimize or eliminate redesign resulting

 PDF Key takeaways: Complex electronics and software are now a critical component of many consumer and business durable goods. Traditional manufacturing companies must now have high-tech product development competency, which requires managing complex engineering tradeoffs. A borderless development-information environment is a critical capability for durable goods manufacturing. End-to-end coverage of the systems engineering process is mandatory for product development information systems. High-Tech Product Development Trends Electromechanical product (e.g., appliances, computers, automobiles) market leadership now requires that those products be digital and interactive, communicating with people and other devices, connecting to the Internet, incorporating sensors, collecting data, displaying more information, and being autonomous, among a host of desired features. Approximately 40% of CEOs believe technology will have the biggest impact on their organization in the next 3 years. 1 Mainstream manufacturers must now have high-tech product development competency to compete successfully. Even home appliances are becoming high-tech. Ten years ago, for example, washing machines were electromechanical units with simple

We couldn't find that page! It could be because: An out-of-date bookmark/favorite A search engine that has an out-of-date listing for this site A mistyped address You have no access to this page The requested resource was not found. An error has occurred while processing your request.

Thank you for reaching out to us, we'll contact you at our very first opportunity!

Articles and columns written or featuring CIMdata consultants, collected for you and FREE to read online now. Some of these links will lead you outside the CIMdata web site to the sites that published the article.   2014 Systems Engineering Meets Moldmaking (MoldMaking Technology, August 1, 2014) By Peter Bilello, President, CIMdata, Inc. PLM: There is More Than Meets the Eye (Asia Pacific Metalworking Equipment News (eAPMEN) July/Aug 2014) By Peter Bilello, President, CIMdata, Inc. Managing Your Analysis and Simulation Data (ConnectPress, July 16, 2014) By John Myers, ConnectPress Editor Featuring Dr. Keith Meintjes, Simulation & Analysis Practice Manager, CIMdata, Inc. CIMdata Reaffirms Collaborative Innovation and Social Product Development Practice (ConnectPress, June 25, 2014) By Jill Jerabek, ConnectPress Editor Featuring Dr. Suna Polat, Director, Collaborative Innovation & Social Product Development Consulting Practice, CIMdata, Inc. CIMdata Aerospace & Defense PLM Action Group Addresses The Big 3 (ConnectPress, June 10, 2014) By John Myers, ConnectPress Editor Featuring James Roche, Aerospace and Defense Practice Manager, CIMdata, Inc. ‘Experiencing’ the Quality of the Internet of

Program will take place in Oslo – November 18-22 Ann Arbor, Michigan, August 15, 2013 — CIMdata, Inc., the leading global PLM strategic management consulting and research firm announces that it will bring its highly acclaimed PLM Certificate Program to Oslo, Norway from November 18-22, 2013. The CIMdata PLM Certificate Program is the flagship offering of CIMdata PLM Leadership, the PLM industry’s most comprehensive non-biased education and training offering available for today’s PLM professionals. The CIMdata PLM Certificate Program prepares PLM professionals at several levels to successfully address the challenges inherent in PLM strategy development and implementation. This assessment-based certificate program includes a personalized classroom experience, individual and team-based exercises, and individual evaluations of achievement. Additionally, the program provides intensive and extensive exposure to a team of CIMdata experts. Upon successful completion of the program, participants receive a CIMdata PLM Certificate and become a member of CIMdata’s global PLM Leadership community. According to

hyperMILL supports automated NC programming and efficient manufacturing ANN ARBOR, Michigan, 6 August 2013—CIMdata, Inc., the leading global PLM strategic management consulting and research firm announces the release of a new product review for OPEN MIND Technologies’ CAM solution, hyperMILL. This product review presents CIMdata’s perspective on hyperMILL, a geometry-based CAM solution that provides a highly graphical Windows-oriented user interface that supports 2- and 3-axis milling, high-speed cutting, mill-turn, and industry-leading 5-axis milling capabilities for cavities, surfaces, and specialized machining tasks. The suite of hyperMILL modules includes the newly developed hyperCAD-S, a high-performance CAM-capable hybrid surface and solid modeling software package for designing, editing, repairing, and analyzing surfaces and solids. This paper presents a business case offered by hyperMILL for end users who are concerned about the business risk of transitioning from their existing 2- and 3-axis equipment, to more efficient and flexible 5-axis equipment. This review provides CIMdata’s perspective on OPEN