CIMdata Blog

JBT Marel Corporation announced that it will report first quarter 2026 financial results on Monday, May 4, 2026, after the market closes. JBT Marel will host an earnings conference call on Tuesday, May 5, 2026, at 10:00 AM ET / 14:00 GMT. The conference call will be webcast and is accessible through this link: Webcast Registration. The webcast will also be available for replay shortly after the conference call ends. This information is also available on the Company’s Investor Relations Website. To view the original press release, please click here. Search for JBT Marel on CIMdata.com

Mensch und Maschine Software SE, a CAD/CAM/BIM specialist company, started 2026 with the most profitable quarter in the company’s history. EBIT and net profit rose by double digits to new historical records. Growth drivers were a solid M+M Software business and moderate cost level due to the personnel consolidation in the previous year. Group sales increased to EUR 71.56 mln (PY: 66.02 / +8.4%), with EUR 34.26 mln (PY: 32.63 / +5.0%) from M+M Software and EUR 37.30 mln (PY: 33.39 / +11.7%) from the Digitization segment. Group gross profit amounted to EUR 51.57 mln (PY: 49.44 / +4.3%), with EUR 30.85 mln (PY: 28.98 / +6.5%) from M+M Software and EUR 20.72 mln (PY: 20.47) from Digitization, where the weak +1.2% growth was more than offset by lower segment expenses. Operating profit EBIT at EUR 18.32 mln (PY: 16.11 / +13.7%) achieved the best quarterly value in the company’s history, with

Rockwell Automation, Inc. is scheduled to report its second quarter fiscal 2026 results on Tuesday, May 5, before the market opens. The release will be posted on the Rockwell Investor Relations website at www.rockwellautomation.com/en-us/investors.html. A conference call to discuss the quarterly results will be held at 7:30 a.m. CDT on May 5. This call will be audio webcast and accessible on the Rockwell Automation Investor Relations website. Presentation materials will also be available on the website prior to the call. Interested parties can access the conference call by dialing the following numbers: (888) 330-2022 in North America; (365) 977-0051 in Canada; +1 (646) 960-0690 for other countries. Use the following passcode: 5499533. Please dial in 10 minutes prior to the start of the call. A replay of the call will be available on the Investor Relations section of the Rockwell Automation website through June 5. To view the original press release, please click here. Search for

 PDF Takeaways Gen 7 is the latest iteration of Dassault Systèmes evolution that began more than thirty-five years go, where they have progressed from 3D to DMU to PDM to PLM to Virtual Twin to Virtual Twin of Human, and arrives today at 3D UNIV+RSES 3D UNIV+RSES extends the 3DEXPERIENCE platform into generative AI and Industrial World Models based on science and physics. Virtual companions guide the company through the product lifecycle and enable the development and validation of products digitally. Customer keynotes from well-known companies such as Ford Motor Company, Lockheed Martin Aeronautics, and Vermeer Corporation delivered intriguing insights on how Dassault Systèmes products, including the 3DEXPERIENCE platform and ENOVIA, are used to bring their products to market. Specialists from Dassault Systèmes delivered numerous sessions on new products and capabilities available in the latest product releases and customers such as Emerson, FNSS, and Tesla discussed how they use ENOVIA to solve their PLM related

Siemens launched the Eigen Engineering Agent, its purpose-built AI for automation engineering, now generally available. The Eigen Engineering Agent represents a new class of industrial AI product: one that no longer just generates suggestions but instead uses multi-step reasoning and self-correction to carry out tasks autonomously.  Unlike generic AI tools, the Eigen Engineering Agent operates inside real engineering systems, with full awareness of each project’s context and constraints. With this understanding, it is able to execute automation engineering tasks like PLC coding, Human-Machine-Interface (HMI) visualization, and device configuration, while meeting industrial standards for correctness, safety, and reliability.  As industrial innovation cycles tighten and shortages of skilled engineers persist, the Eigen Engineering Agent frees engineers to focus on higher-level system challenges, without compromising accuracy or reliability. It completes AI-powered workflows two to five times faster than manual alternatives, with up to 80 percent higher solution quality and 50 percent greater engineering efficiency.  “As demand

This announcement is regarding the SDC Verifier 2026 R1 release for engineers working on offshore, marine, wind, and other code-driven structural verification tasks. This version expands support for offshore design standards, improves how plated structures and tubular joints are checked, and removes a number of practical workflow issues that slow engineers down in day-to-day work. It also brings compatibility updates for the latest CAE environments, including Ansys 2026 R1, Simcenter 3D 2512, and Femap 2512. Read in detail about the release here: https://sdcverifier.com/blog/sdc-verifier-2026-r1/ To view the original press release, please click here. Search for SDC Verifier on CIMdata.com

ENCY Software has released version 2.8 of ENCY, its CAD/CAM system, and ENCY Robot. This release brings faster toolpath calculation, more flexible background verification, improved simulation behavior, and a set of practical usability and stability updates. ENCY calculates the machining result and runs checks during toolpath calculation. This is especially convenient for simple projects that do not include fine-step finishing operations. In ENCY 2.8 and ENCY Robot 2.8, background simulation during toolpath calculation can now be configured more flexibly. System settings now let you define separately both the machining result calculation and the level of checks performed at the toolpath calculation stage. If background machining simulation is disabled, the system calculates only the toolpath from the 3D model, while the machining result can be checked later in Simulation mode. At the same time, operations that require the result of the previous machining step for correct calculation continue to work properly: ENCY automatically calculates the required intermediate result for

SAP SE will release its results for the first quarter of 2026 on Thursday, April 23. SAP CEO Christian Klein and CFO Dominik Asam will host a financial analyst call to review first quarter results. Media representatives may may listen in on the virtual analyst via Webcast on April 23, 2026, at 11:00 p.m. CEST/5:00 p.m. ET. To view the original press release, please click here. Search for SAP on CIMdata.com

PROSTEP’s presence at this year’s Hannover Messe HMI is focused entirely on data ecosystem connectivity. At the Platform Industrie 4.0 booth (Hall 13, Booth C24), the PLM integration specialist demonstrates how easily its Digital Thread platform, with the OpenPDM and OpenDXM brands, can connect to different data ecosystems. The foundation for this was laid within the Decide4ECO project through the development of the Eclipse Dataspace Components (EDC) connector. The connector supports the exchange of data from common PLM, ALM, or ERP systems via Catena‑X and other data ecosystems such as Manufacturing‑X. With the development of the EDC connector, PROSTEP is responding to the growing demand from industry for solutions that support sovereign data exchange across industry boundaries. At HMI, the company presents practical use cases. Based on OpenPDM, PROSTEP demonstrates the integration of PLM applications into data ecosystems and the exchange of sustainability‑relevant indicators, such as the Product Carbon Footprint (PCF). The exchange of certificates,

IBM and the Grainger College of Engineering at the University of Illinois Urbana-Champaign (U. of I.) announced an expansion of the IBM-Illinois Discovery Accelerator Institute. This includes deploying quantum-centric supercomputing to Illinois innovators through the integration of U. of I.’s National Center for Supercomputing Applications (NCSA) Delta and DeltaAI supercomputers with IBM quantum computers. Launched in 2021, the Discovery Accelerator Institute has 20 current, ongoing projects across hybrid cloud, AI, quantum computing, materials discovery, and sustainability, and its members have published more than 230 research papers. Moving into this new phase, the Institute will build on its first five years of technological progress in AI systems and computational science to shape how quantum computing and AI will drive the next generation of supercomputing. These new initiatives will include the development of new algorithms that enable classical and quantum systems to work together on problems neither can solve alone; as well as the