• Call us at +1 734.668.9922
This email address is being protected from spambots. You need JavaScript enabled to view it.
Cimdata Logo

Articles & Media

Articles and other media written/produced or featuring CIMdata consultants, collected for you and FREE to read online now. Some of these links will lead you outside the CIMdata web site to the sites that published the article.

 

2017

Optimizing the Additive Manufacturing Workflow with PLM
(http://www.additivemanufacturing.media/blog/post/optimizing-the-additive-manufacturing-workflow-with-plm, August 16, 2017)
By Christina M. Fuges, Contributing Editor, Additive Manufacturing

Digitalisation enabled by product lifecycle management
(https://www.raconteur.net/product-lifecycle-management-2017, June 22, 2017)
By Peter Bilello, President, CIMdata, Inc.

PLM Solutions are Evolving into Product Innovation Platforms
(Fibre2Fashion.com, May 26, 2017)
A Chat with Peter Bilello, President, CIMdata, Inc.

Digital Twins, Avatars Enabled by PLM
(Connect Press, May 16, 2017)
By Peter Bilello, President, CIMdata, Inc.

IoT: Expanding the PLM Opportunity
(Connect Press, March 30, 2017)
By Gerard Litjens, Vice President, CIMdata, Inc.

The Discomfort of the Comfort Zone Opportunities and Obstacles to Change in AEC
(AEC-ST News, March 1, 2017)
By Edward J. Martin, Director, AEC / Manufacturing Convergence Consulting Practice, CIMdata, Inc.

Political Realities of PLM Implementation Projects
(Engineering.com, February 14, 2017)
By Tom Gill, Frank Popielas, and Fred Keith.

Industry Experts Identify Technology Trends and Best Practices for AEC in 2017 and Beyond
(ConnectPress, January 16, 2017)
By Rita Stange, Managing Editor, ConnectPress

CIMdata Market Analysis Report Highlights Simulation & Analysis Trends, Market Leaders and Future Forecast
(ConnectPress, January 13, 2017)
By Stan Przybylinski, Vice President, CIMdata, Inc.

2016

PLM’S NEED IS CLEAR. WHY THE CHANGE IS NOT OBVIOUS?
(BeyondPLM, September 7, 2016)
By Oleg Shilovitsky

Convergences: Higher Education and PLM Upheavals
(ConnectPress, July 26, 2016)
By Peter Bilello, President, CIMdata, Inc.

Simulation Data Management Takes New Twists and Turns
(Desktop Engineering, July 18, 2016)
By Beth Stackpole, Contributing Editor, Desktop Engineering

Ending the rip-and-replace approach to aging software
(Aerospace Manufacturing and Design , July 7, 2016)
By Tom Gill, Practice Manager, PLM Enterprise Value & Integration Knowledge Council, CIMdata, Inc.

The Digital Thread from Manufacturing to Facilities
(ConnectPress, June 17, 2016)
By Edward J. Martin, Director, AEC / Manufacturing Convergence Consulting Practice, CIMdata, Inc.
Sign up for free download.

The Beginning and Future of CIMdata's AEC & Manufacturing Convergence Consulting Practice
(ConnectPress, May 27, 2016)
Compiled by ConnectPress

A Tech-Management "Third Rail": Aerospace and Defense Group Seeks to Mitigate High Costs and Risks of Lost Data in PLM Obsolescence
(March 17, 2016. Retrieved from http://www.engineering.com/. Engineering.com)
By Tom Gill, Practice Manager, PLM Enterprise Value & Integration Knowledge Council, CIMdata, Inc.

Delving Into and Demystifying the Kinetic IoT
(ConnectPress, March 15, 2016)
By Laila Hirr, High-Tech Practice Lead, CIMdata, Inc.

The PLM Platform Comes of Age
(CIO Review, March 8, 2016)
By Peter Bilello, President, CIMdata, Inc.

Smart Connected Products & PLM - The Role of OSLC
(CIO Review, March 8, 2016)
By Stan Przybylinski, Vice President, CIMdata, Inc.

2015

Research Shows Growth in CAM Market and Trends on the Rise
(ConnectPress, November 23, 2015)
By Stan Przybylinski, Vice President of Research, CIMdata, Inc.

Digitization Forms New Value Stream
(ConnectPress, July 13, 2015)
By Peter Bilello, President, CIMdata, Inc.

Why Supply Chain Collaborative Practice is Paramount for Success
(June 29, 2015. Retrieved from https://www.sourcingjournalonline.com/. Sourcing Journal)

In High-Tech Electronics, Managing Three Lifecycles as One Is a New Key to Product Development
(May 19, 2015. Retrieved from http://www.engineering.com/. Engineering.com)
By Laila Hirr, High-Tech Practice Lead, CIMdata, Inc.

Platformization, Closing Open Loops Are Forcing Product Lifecycle Management to the Enterprise
(CIO Review, April 6, 2015 pp 14-15)
By Peter Bilello, President, CIMdata, Inc.

Closing the Product Lifecycle's Many Loops
(ConnectPress, March 12, 2015)
By Peter Bilello, President, CIMdata, Inc.

Value Gaps and PLM Sustainability
(March 6, 2015. Retrieved from http://www.cioreview.com/. Published in CIO Review)
By Peter Bilello, President, CIMdata, Inc.

The New World of Platforms
(February 3, 2015. Retrieved from http://www.onlinetmd.com/. Published in Today's Medical Developments)
By Peter Bilello, President, CIMdata, Inc.

2014

The Evolution of PLM
(Product Innovation, December 17, 2014)
Interview with Peter Bilello, President, CIMdata, Inc.

The Next Step in PLM's Evolution: Platformization
(Product Design & Development, December 16, 2014)
By Peter Bilello, President, CIMdata, Inc.

Workshop Explores Collaboration, Integration, and Sustainability as Keys to Maximizing Value of PLM
(ConnectPress, November 19, 2014)
By Dr. Suna Polat, Director, Collaborative Innovation & Social Product Development Consulting Practice, CIMdata, Inc.

Social Product Development: Can LIKEs and Search Improve Productivity, Knowledge Capture, Collaboration and Innovation? Yes! - An Interview with Dr. Suna Polat
(CoDev News & Updates, October 25, 2014)
By Jackie Cooper, Management Roundtable
Featuring Dr. Suna Polat, Director, Collaborative Innovation & Social Product Development Consulting Practice, CIMdata, Inc.

Auto Industry's Product-Development Challenges Are Driving the Rethink and Platformization of PLM
(ConnectPress, October 22, 2014)
By Peter Bilello, President, CIMdata, Inc.

Systems Engineering Meets Moldmaking
(Mold Making Technology, August 1, 2014)
By Peter Bilello, President, CIMdata, Inc.

PLM: There is More Than Meets the Eye
(Asia Pacific Metalworking Equipment News (eAPMEN) July/Aug 2014)
By Peter Bilello, President, CIMdata, Inc.

Managing Your Analysis and Simulation Data
(ConnectPress, July 16, 2014)
By John Myers, ConnectPress Editor
Featuring Dr. Keith Meintjes, Simulation & Analysis Practice Manager, CIMdata, Inc.

CIMdata Reaffirms Collaborative Innovation and Social Product Development Practice
(ConnectPress, June 25, 2014)
By Jill Jerabek, ConnectPress Editor
Featuring Dr. Suna Polat, Director, Collaborative Innovation & Social Product Development Consulting Practice, CIMdata, Inc.

CIMdata Aerospace & Defense PLM Action Group Addresses The Big 3
(ConnectPress, June 10, 2014)
By John Myers, ConnectPress Editor
Featuring James Roche, Aerospace and Defense Practice Manager, CIMdata, Inc.

‘Experiencing’ the Quality of the Internet of Things
(Quality Digest, May 15, 2014)
By Stan Przybylinski, Vice President of Research, CIMdata, Inc.

Value Gaps and PLM Sustainability
(CIO Review, April 8, 2014)
By Peter Bilello, President, CIMdata, Inc.

The Internet of Things: Beefing Up the 'Back End' of PLM
(ConnectPress, March 26, 2014)
By Stan Przybylinski, Vice President of Research, CIMdata, Inc.

PLM Value Gap Emerges
(Aerospace Manufacturing and Design, February 5, 2014)
By James Roche, Practice Manager, Aerospace & Defense, CIMdata, Inc.

Fragmentation: Product Development's Dark Secret
(ConnectPress, January 27, 2014)
By Peter Bilello, President, CIMdata, Inc.

Moving Toward Supporting the Circular Economy
(Raconteur Report on PLM, January 27, 2014)
By Peter Bilello, President, CIMdata, Inc.

Raconteur Report on PLM
(The London Times, January 27, 2014)


2013

Systems Engineering Reaches its Tipping Point
(ConnectPress, December 29, 2013)
By John Myers, ConnectPress Editor
Featuring John MacKrell, Vice President, CIMdata, Inc.

Value Gaps and PLM Sustainability
(ConnectPress, October 3, 2013)
By Peter Bilello, President, CIMdata, Inc.

Collaboration, Social Media and the Single-User Mode
(ConnectPress, August 20, 2013)
By Dana Nickerson, Director, CIMdata, Inc.

CIMdata Feature: Simulation & Analysis Governance
(ConnectPress, May 1, 2013)
By Peter Bilello, President, CIMdata, Inc.

PLM Returns on Investment ... with User Metrics
(ConnectPress, February 15, 2013)
By Peter Bilello, President, CIMdata, Inc.

CIMdata, Big PLM Users Form Research Consortium to Go Beyond Standards
(ConnectPress, January 11, 2013)
By Peter Bilello, President, CIMdata, Inc.


2012

Raconteur Report on PLM
(The London Times, December 5, 2012)

Brave New World’ CIMdata’s 2012 PLM Road Map Conference Goes Strategic Before a Capacity Crowd
(ConnectPress, October 25, 2012)
By Peter Bilello, President, CIMdata, Inc.

PLM View: Managing Intellectual Property
(ConnectPress, October 12, 2012)
By Peter Bilello, President, CIMdata, Inc.

A New Era for PLM Software
(Desktop Engineering, October 1, 2012)
By Peter Bilello, President, CIMdata, Inc.

PLM View: Market Trends Are Robust
(ConnectPress, August 23, 2012)
By Peter Bilello, President, CIMdata, Inc.

PLM VIEW: What is the Whole Truth?
(ConnectPress, July 12, 2012)
By Peter Bilello, President, CIMdata, Inc.

Pharma Eyes PLM For Enterprise-Level Information To Handle FDA Compliance, PAT/QbD, Clinical Trials
(ConnectPress, June 13, 2012)
By Peter Bilello, President, CIMdata, Inc.

Empowering Systems Engineering with PLM
(ConnectPress, June 5, 2012)
By Peter Bilello, President, CIMdata, Inc.

Optimizing Product Cost by Leveraging Infor10 PLM Process (Optiva)
(ConnectPress, May 21, 2012)
By Peter Bilello, President, CIMdata, Inc.

Analytics, PLM Converge Amid Data Tsunami; A Ceaseless Search for Sustainable Advantage
(ConnectPress, April 16, 2012)
By Peter Bilello, President, CIMdata, Inc.


2011

Assessing Implementation Maturity
(ConnectPress, November 21, 2011)
By Peter Bilello, President, CIMdata, Inc.

The Cloud: Worrying About The Wrong Things?
(ConnectPress, November 9, 2011)
By Peter Bilello, President, CIMdata, Inc.

Open-Source and PLM Marketplace Maturity
(ConnectPress, September 27, 2011)
By Peter Bilello, President, CIMdata, Inc.

Mobility Meets PLM
(MTAdditive, September 16, 2011)
By Peter Bilello, President, CIMdata, Inc.

Future Directions of PLM
(ConnectPress, August 22, 2011)
By Peter Bilello, President, CIMdata, Inc.

Going “Back to the Future” as PLM Sales Strengthen
(MTAdditive, June 23, 2011)
By Peter Bilello, President, CIMdata, Inc.

Green Design - With simulation and analysis, going green offers many benefits
(ANSYS Advantage, March 2011)
By Peter Bilello, President, CIMdata, Inc.

PLM & System Overlaps
(Time Compression, February 24, 2011)
By Peter Bilello, President, CIMdata, Inc.

The Social Network & Product Development
(Time Compression, January 6, 2011)
By Peter Bilello, President, CIMdata, Inc.


2010

PLM, Social Networks, the Cloud & More
(Time Compression, October 29, 2010)
By Peter Bilello, President, CIMdata, Inc.

PLM: State of the Technology
(Time Compression, August 26, 2010)
By Peter Bilello, President, CIMdata, Inc.

Managing Compliance
(Time Compression, July 1, 2010)
By Peter Bilello, President, CIMdata, Inc.

Visualization for Everybody
(Time Compression, April 20, 2010)
By Peter Bilello, President, CIMdata, Inc.

Analysis & Simulation Data: Why You Should Capture It
(Time Compression, February 24, 2010)
By Ed Miller, President, CIMdata, Inc.

Collaboration Across the Design Chain
(Time Compression, January 11, 2010)
By Ed Miller, President, CIMdata, Inc.


2009

2008 PLM Market Growth Was Strong Going into the Global Economic Downturn
(Time Compression, June 30, 2009)
By Ed Miller, President, CIMdata, Inc.


2008

Trends in NC Software; CIMdata shows efficiency, effectiveness are industry goals
(Tooling & Production, November/December 2008)
By Alan Christman, CIMdata, Inc.


2007

A PLM Evolution
(ISA InTech, July 1, 2007)
By Ed Miller, President, CIMdata, Inc.


2006

Manufacturers Go Digital to Stay Competitive (PDF)
(Harvest Magazine, November 22, 2006)
By Ed Miller, President, CIMdata, Inc.

Technological Advances Ensure Value Throughout the Market (PDF)
(Tooling & Production, November 2006, page 18-23)
By Alan Christman, CIMdata, Inc.

Ask the Expert: PLM Implementation Challenges
(Managing Automation, October 29, 2006)
By Ken Amann, Consultant, CIMdata, Inc.

Trends in NC Programming For Moldmakers
(Moldmaking Technology, May 2006)
By Alan Christman, CIMdata, Inc.


ipad background image

Featured Cimdata Reports

ipadcontent
PLM Benefits Appraisal Guide

CIMdata’s PLM Benefits Appraisal Guide is designed to help potential PLM users evaluate the applicability and payoffs of PLM in their enterprise, and to help existing users of PLM monitor the impact it is having on their product programs.

ipadcontent
AEC Market Overview Report

The CIMdata 2017 AEC Market Overview Report presents CIMdata’s detailed analysis of the Architecture, Engineering, and Construction (AEC) market.

ipadcontent
PLM Market Analysis Reports

The PLM MAR Series provides detailed information and in-depth analysis on the worldwide PLM market. It contains analyses of major trends and issues, leading PLM providers, revenue analyses for geographical regions and industry sectors, and historical and projected data on market growth.

ipadcontent
PLM Market Analysis Country Reports

These reports offer country-specific analyses of the PLM market. Their focus is on PLM investment and use in industrial markets. Reports cover Brazil, Germany, India, Japan, Russia, South Korea, and the United States.

ipadcontent
Simulation & Analysis Market Analysis Report

This report presents CIMdata’s overview of the global simulation and analysis market, one of the fastest growing segments of the overall product lifecycle management market, including profiles of the leading S&A firms.

ipadcontent
CAM Market Analysis Report

This report presents CIMdata’s overview of the worldwide CAM software and services market. It also includes a discussion on the trends in the CAM industry and updates on the top CAM solution providers.