We use cookies to help provide you with the best possible online experience.
By using this site, you agree that we may store and access cookies on your device.
You can find out more and set your own preferences here.
Blog
Education (63)
PLM Enterprise Value & Integration and Social Product Development & Collaboration Knowledge Council Workshop
October 3rd, 2014 | The Inn at St. John's, Plymouth, MI
Venue Information
The Inn at St. John's
44045 Five Mile Road
Plymouth, Michigan 48170
Tel: +1 734.414.0600
The PLM Enterprise Value & Integration and Social Product Development & Collaboration Knowledge Council Workshop will be held at The Inn at St. John's which is located in Plymouth, Michigan just 12 miles north of the Detroit airport.
The Inn at St. John’s
44045 Five Mile Road Plymouth, Michigan 48170
Tel: +1.734.414.0600
Recommended Hotels
The Inn at St. John's, Plymouth, MI
There is limited availability at The Inn at St. John's - call them at +1.734.414.0600 to check availability under the CIMdata/PLM Road Map block.
The Hilton Garden Inn, Plymouth, MI
Located right next door to the Inn at St. John's, the Hilton Garden Inn makes a convenient alternative. Call them at +1.734.354.0001 to make a reservation. To get our group rate mention "CIMdata".
The shuttle from the Inn at St. John's will be available to pick you up from and drop you off at the Hilton Garden Inn.
Cost to Attend
PLM Enterprise Value & Integration and Social Product Development & Collaboration Knowledge Council Members: Check to see if you qualify for a free ticket!
Non-CIMdata PLM Enterprise Value & Integration and Social Product Development & Collaboration Knowledge Council Members: US$295
Workshop + PLM Road Map; US$595
Published in
Education
Collaboration, Integration, and Sustainability: Keys to Maximizing the Value of PLM
A CIMdata PLM Enterprise Value & Integration and Social Product Development & Collaboration Knowledge Council Workshop
Friday, October 3, 2014
The Inn at St. John's
44045 Five Mile Road
Plymouth, Michigan 48170
Tel: +1 734.414.0600
Agenda
Friday, October 3, 2014
- 7:30 a.m. – 8:00 a.m. | Registration and Continental Breakfast
- 8:00 a.m. – 8:15 a.m. | Welcome and Introduction
-
8:15 a.m. – 9:00 a.m. | Introduction to CIMdata Knowledge Council Research
Dr. Ken Versprille, Executive Consultant, CIMdata [Bio]
Dr. Suna Polat, Director, Collaborative Innovation & Social Product Development Consulting Practice, CIMdata [Bio]
Tom Gill, Practice Manager, PLM Enterprise Value & Integration, CIMdata [Bio]
-
9:00 a.m. – 10:00 a.m. | Chrysler's PLM Journey: Supporting People, Process & Technology [Read Abstract]
Vikal Sachdeva, Manager for Teamcenter Operations, Visualization, and Enterprise Data Exchange,Chrysler [Bio] - 10:00 a.m. – 10:30 a.m. | Networking Break
-
10:30 a.m. – 11:00 a.m. | Using Social Engagement to Drive Innovation [Read Abstract]
Megan Pukala, Assistant Brand Manager, Fortune 500 Company [Bio]
-
11:00 a.m. – 12:15 p.m. | Panel Discussion: Data Integration and Collaboration: What is the next generation?
Moderated by CIMdata
– John Leney, VP & Global Head of Sales and Marketing, Geometric [Bio]
– Steve Fennessey, Director of Business Innovation, Imaginatik [Bio]
– Steve Gwizdala,Territory Sales Manager, Jive Software [Bio]
– Rohit Tangri, Vice President, Teamcenter Product Management, Marketing & Business Development, Siemens PLM Software [Bio]
– Sathish Kumar Thirugnanam, Consultant, NPI VE - Innovation and Transformation Group, Tata Consultancy Services [Bio]
Leading solution providers gather to discuss the status and current issues around data integration and enterprise collaboration. The discussion will focus on describing what the next-generation of collaboration technology will look like and what benefits it will enable. Key roadblocks to achieving this vision will be discussed and potential solutions identified. - 12:15 p.m. – 1:45 p.m. | Networking & Working Session Over Lunch
-
1:45 p.m. – 2:30 p.m. | Joint Working Session - Sharing our Findings
- 2:30 p.m. | Workshop Adjourns
For more information:
please call: +1 734.668.9922
or email
This email address is being protected from spambots. You need JavaScript enabled to view it.
Supporting Organization
Published in
Education
A CIMdata PLM Enterprise Value & Integration and Social Product Development & Collaboration Knowledge Council Workshop
October 3, 2014 | The Inn at St. John's, Plymouth, MI
Who Should Attend?
- Members of CIMdata’s PLM Enterprise Value & Integration and Social Product Development & Collaboration Knowledge Councils
- PLM Program directors
- Product Development directors
- Innovation and R&D Productivity leaders
- Open Innovation leaders
- Knowledge Management professionals
- Finance directors
- IT directors
- Design managers
- Engineering managers
- Engineering IT managers
- PLM solution and service providers
- Engineering technical staff
- Anyone involved in the planning, deployment, and operation of PLM solutions and services
Published in
Education
Collaboration, Integration, and Sustainability: Keys to Maximizing the Value of PLM
A CIMdata PLM Enterprise Value & Integration and Social Product Development & Collaboration Knowledge Council Workshop
October 3, 2014 | The Inn at St. John's, Plymouth, MI
Why Should I Attend?
- Find out how integration and collaboration solutions can be used to improve business decisions
- Gain an understanding about why your company should be measuring PLM sustainability as a part of calculating ROI
- Learn strategies, approaches, and tools to unleash the potential of collaborative innovation and social product development in your organization
- Learn about CIMdata’s collaboration "maturity" model and provide input for its evolution
- Voice your needs and concerns and guide CIMdata’s vision and research agenda around collaborative innovation, social product development, as well as PLM enterprise value measurement and integration
- Build a network of industry users and solution providers around integration, assessing PLM value, collaborative innovation, and social product development
- Learn from the experiences of others dealing with a similar range of problems to those you face
- Network with members of CIMdata’s PLM Enterprise Value & Integration and Social Product Development & Collaboration Knowledge Councils, solution and service providers, and like-minded peers
Published in
Education
Who Should Attend PLM Road Map™ 2014?
- Business Process Managers
- CAD Managers & CAD Strategy Experts
- Chief Engineers
- Chief Innovation Officers
- Chief Technology Officers
- Design Engineers
- Design and Simulation Experts
- Engineering IT Executives
- Engineering Managers
- Innovation Practitioners
- IT Professionals
- Mechatronics Experts
- NPD Leaders
- PLM Implementation Professionals
- PLM Sustainability Professionals
- Process Designers
- Process Improvement Experts
- Procurement Managers
- Product Platform Managers
- Product Portfolio Managers
- Software & Service Professionals
- Solution Managers and Providers
- Systems Architects
- Systems Engineering Experts
PLM Road Map™ 2014
Published in
Education
PLM Road Map™ 2014
PLM-enabled Continuous Product Development and Delivery for the Automotive & Transportation Industry and Supply Chain
October 2, 2014 | The Inn at St. John's, Plymouth, Michigan
PLM Road Map™ 2014 will be held at The Inn at St. John's which is located in Plymouth, Michigan just 12 miles north of the Detroit airport.
The Inn at St. John’s
44045 Five Mile Road Plymouth, Michigan 48170
Tel: +1.734.414.0600
Recommended Hotels
The Inn at St. John's, Plymouth, MI
There is limited availability at The Inn at St. John's - call them at +1.734.414.0600 to check availability under the CIMdata/PLM Road Map block.
The Hilton Garden Inn, Plymouth, MI
Located right next door to the Inn at St. John's, the Hilton Garden Inn makes a convenient alternative. Call them at +1.734.354.0001 to make a reservation. To get our group rate mention "CIMdata".
The shuttle from the Inn at St. John's will be available to pick you up from and drop you off at the Hilton Garden Inn.
Cost to Attend
General Admission: $395 includes lunch, breakfast, and two breaks.
CIMdata PLM Knowledge Council Members: Your membership in one of CIMdata's PLM Knowledge Councils may provide some free or discounted tickets for this event - email This email address is being protected from spambots. You need JavaScript enabled to view it. to find out if this benefit is available to you.
Published in
Education
Published in
Education
PLM Road Map™ 2014
PLM-enabled Continuous Product Development and Delivery for the Automotive & Transportation Industry and Supply Chain
Thursday, October 2, 2014
The Inn at St. John's | Plymouth | MI
Agenda at a Glance
-
7:00 a.m. – 8:00 a.m. | Registration & PLM Collaboration Café -
8:00 a.m. – 8:10 a.m. | Welcoming Remarks
Peter Bilello, President, CIMdata [Bio] -
8:10 a.m. – 8:45 a.m. | The Volvo Journey [Abstract]
Anders Carlsson, Senior Advisor - Virtual Manufacturing & PLM, Volvo Car Corporation [Bio] -
8:45 a.m. – 9:00 a.m. | PLM Vignette: SDPD – the New Paradigm for Innovative Product Development [Abstract]
Gerald Deren, Executive Director, Americas Business Development & Consulting, Siemens Strategic Industries Americas [Bio] -
9:00 a.m. – 9:30 a.m. | New Age Collaboration and Design [Abstract]
John Mannisto, Engineering Director, Simulation-Based Design, Whirlpool Corporation [Bio] -
9:30 a.m. – 9:45 a.m. | PLM Vignette: OEM-to-OEM Collaboration for Global Engineering [Abstract]
Louis J. Pascarella, Principal Consultant, Geometric [Bio] -
9:45 a.m. – 10:15 a.m. | Networking Break & PLM Collaboration Café -
10:15 a.m. – 10:45 a.m. | Global Product Development & the CAE Challenge [Abstract]
Dan Mekker, Manager, Gas Turbine Design Integrity, Siemens Energy [Bio] -
10:45 a.m. – 11:00 a.m. | PLM Vignette: Digital Industry 4.0 – Digitize, Industrialize, and Optimize in Automotive and Transportation [Abstract]
Scott Whiteman, Senior Manager, Accenture [Bio] -
11:00 a.m. – 11:30 a.m. | Advanced Information Technology Solutions: An Engine of Innovation [Abstract]
Greg Schroeder, Senior Research Engineer, Center for Automotive Research [Bio] -
11:30 a.m. – 12:00 p.m. | A Flexible Approach to PLM [Abstract]
Rolf Hüsemann, Manager, Engineering Systems & PLM, GETRAG FORD Transmissions [Bio] -
12:00 p.m. – 12:15 p.m. | PLM Vignette: Integrated Requirements Management for Systems Engineering [Abstract]
Marc Lind, SVP Global Marketing, Aras [Bio] -
12:15 p.m. – 1:30 p.m. | Networking Lunch & PLM Collaboration Café -
1:30 p.m. – 2:05 p.m. | Model-Based Systems Engineering and PLM [Abstract]
Dr. Nicholas (Nick) Bell, CIO, Global Product Development, Information Technology, General Motors [Bio] -
2:05 p.m. – 2:20 p.m. | PLM Vignette: Cloud-based PLM: Transforming How We Do Product Innovation [Abstract]
Ron Locklin, Director, PLM360, Industry Strategy & Marketing, Autodesk [Bio] -
2:20 p.m. – 2:50 p.m. | “Built for It”, The Caterpillar Service Information Solution [Abstract]
Mike Perez, Strategic Projects & Services Manager, Caterpillar Inc. [Bio] -
2:50 p.m. – 3:05 p.m. | PLM Vignette: Why Driving in Circles is the Right & Best Future for PLM [Abstract]
Derek Piette, Product Management Director, PTC [Bio] - 3:05 p.m. – 3:35 p.m. | Networking Break & PLM Collaboration Café
-
3:35 p.m. – 4:05 p.m. | Additive Manufacturing & Conformal Cooling [Abstract]
Lou Young, Jr., Director of New Business Development,Tooling & Manufacturing, Linear Mold & Engineering [Bio] -
4:05 p.m. – 4:40 p.m. | The “platformization” of PLM [Abstract]
Peter Bilello, President, CIMdata [Bio] - 4:40 p.m. – 4:45 p.m. | Conference Adjourns
For answers to your questions:
please call: +1 734.668.9922
or email
This email address is being protected from spambots. You need JavaScript enabled to view it.
Published in
Education
PLM’s Expanding Footprint: Enabling Innovation
A Complimentary CIMdata Educational Webinar
September 10, 2014
11:00 am EDT | 8:00 am PDT | 5:00 pm CEST
Do any of the following statements sound a little too familiar?
-
Innovation is not part of the corporate culture.
-
The PLM technology at my company does not support innovation.
-
It's not clear how existing PLM technologies can be used to support innovation.
-
There is no time to learn to become more innovative.
-
It's not clear if and how the new technologies even relate to PLM or support innovation.
-
I don’t want to be caught off guard by my competitors adopting new innovative technologies.
The PLM technologies to support innovation have been expanding. Today there are many options for PLM, and there are also many new technologies that can support and augment your product design activities. Join CIMdata’s Practice Manager for PLM Leadership, Jim McKinney for this one hour long webinar which will help you navigate through the expanding nature of PLM in support of innovation and learn what the future holds for innovative PLM technology.
What will we cover?
- The expanding nature of PLM in support of innovation
- The details for each expanding area of PLM
- New technologies expanding PLM that support innovation
- Priorities and steps to enable innovation
- What the future holds for innovative PLM technology
What will I Learn?
- You will learn which key areas in PLM support innovation
- You will find out how your business can harness the expanding nature of PLM to enhance innovation
- You will understand how changes in the future of PLM will help your business become more innovative
- You will learn how new PLM enabling technologies can impact your business and support innovation
- You will learn valuable strategies for enabling innovation in your PLM environment
- You will understand how PLM is changing to support innovation
Who should attend?
- PLM team leaders
- PLM team members
- Engineering managers
- PLM users
- PLM solution and service providers
- PLM channel partners seeking more information on PLM
- Corporate training departments looking for education on PLM
- Anyone who wants to learn more about PLM and innovation
During the Webinar you’ll also have the opportunity to ask questions about the topics discussed.
Published in
Education
About Accenture
Accenture is a global management consulting, technology services, and outsourcing company, with approximately 289,000 people serving clients in more than 120 countries. Combining unparalleled experience, comprehensive capabilities across all industries and business functions, and extensive research on the world’s most successful companies, Accenture collaborates with clients to help them become high-performance businesses and governments.
Accenture Product Lifecycle Services help companies organize, develop, and manage products and services, from idea to retirement. Our services provide greater engineering efficiency and predictability to reduce cost and increase return on R&D investment. Our end-to-end Product Lifecycle Services span the full spectrum of strategy, digital, and technology supported by established alliances with major PLM vendors.
Contact
Sandra Waschnewski, Global Marketing Manager
This email address is being protected from spambots. You need JavaScript enabled to view it.
Featured Automotive & Transportation Industry Solutions
Accenture Product Lifecycle Services for Automotive and Manufacturers
Accenture helps automotive companies identify and enter new markets, increase revenues, improve operational performance, and deliver new and innovative products and services more effectively and efficiently, driving competitive advantage. Our practice includes over 2,500 industry professionals across the globe serving most of the automotive companies in the Fortune Global 500 list in all regions and all industry hubs.
Accenture Products Lifecycle Services enables companies to:
- Unlock the value of the up-coming digital disruptive waves in a newly defined industrial eco-system
- Generate a new level of efficiency across the extended value chain via an end-to-end integration of product, customer and service data and enhanced digital capabilities in engineering, manufacturing and services
- Realize the true value of the industrial internet and connected products with the digitalization of products and services and new business models
- Provide new levels of agility, flexibility and efficiency to address locally mature and emerging markets on a global scale
For more information on specific services, visit Accenture’s Product Lifecycle Services website.
Connected Vehicle
The Accenture Connected Vehicle Business Service provides onboard and connectivity solutions, telematics platform and data integration and end-to-end services to automotive, heavy equipment companies, Tier 1 suppliers and new entrants to in the Connected Vehicle ecosystem including telecommunications and insurance companies. The solution combines Accenture’s deep automotive industry knowledge and mobility services expertise with technology experience in a single solution.
Accenture’s Connected Vehicle services enable companies to:
- improve the customer experience
- create efficiencies in areas including real-time predictive monitoring and maintenance
- benefit from new streams of revenues generated by Accenture’s application of analytics, process improvement, program management and integration capabilities for third-party providers
For more information on specific services, visit Accenture’s Connected Vehicle website.
Featured Publications
Accenture Expands their Business Transformation Capabilities with the Acquisition of PRION
Aras Innovator: Redefining Customization & Upgrades
“Be Different”—The ACE 2012 International Conference
Featured Products
Download: Product Lifecycle Services
Download: Connected Vehicle Services
Published in
Education
Featured Cimdata Reports
PLM-Enabled Digital Transformation Benefits Appraisal Guide
The Guide is designed to help potential PLM users evaluate the applicability and payoffs of PLM in their enterprise, and to help existing users of PLM monitor the impact it is having on their product programs.
Aerospace & Defense PLM Action Group
A CIMdata administered PLM advocacy group for the A&D industry
PLM Market Analysis Reports
The PLM MAR Series provides detailed information and in-depth analysis on the worldwide PLM market. It contains analyses of major trends and issues, leading PLM providers, revenue analyses for geographical regions and industry sectors, and historical and projected data on market growth.
PLM Market Analysis Country Reports
These reports offer country-specific analyses of the PLM market. Their focus is on PLM investment and use in industrial markets. Reports cover Brazil, France, Germany, India, Italy, Japan, Russia, South Korea, the United Kingdom, and the United States.
Simulation & Analysis Market Analysis Report
This report presents CIMdata’s overview of the global simulation and analysis market, one of the fastest growing segments of the overall product lifecycle management market, including profiles of the leading S&A firms.
CAM Market Analysis Report
CIMdata's definitive guide to the worldwide CAM software and services market. This comprehensive report provides critical intelligence on market size, user expenditures, trends, and segmentation, alongside authoritative rankings of the top CAM solution providers and reseller revenues.